Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Article
Showing results 3541 to 3600 of 12352
| Effect of pressure drop on performance of hollow-fiber membrane module for gas permeation Chang, Daejun; Min, Joonho; Oh, Sehern; Moon, Kiho, KOREAN JOURNAL OF CHEMICAL ENGINEERING, v.15, no.4, pp.396 - 403, 1998-07 |
| Effect of printing parameters on gravure patterning with conductive silver ink Kim, Seung-hwan; Sung, Hyung-Jin, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, v.25, no.4, 2015-04 |
| Effect of Process Parameters on TSV Formation Using Deep Reactive Ion Etching Kim, Kwang-Seok; Lee, Young-Chul; Ahn, Jee-Hyuk; Song, Jun Yeob; Yoo, Choong D.; Jung, Seung-Boo, KOREAN JOURNAL OF METALS AND MATERIALS, v.48, no.11, pp.1028 - 1034, 2010-11 |
| Effect of processing parameters of the continuous wet spinning system on the crystal phase of PVDF fibers Jeong, Kun; Kim, Da Hye; Chung, Yong Sik; Hwang, Sang Kyun; Hwang, Hui Yun; Kim, Seong Su, JOURNAL OF APPLIED POLYMER SCIENCE, v.135, no.3, 2018-01 |
| Effect of processing routes in a multi-pass continuous hybrid process on mechanical properties, microstructure, and texture evolutions of low-carbon steel wires Hwang, Sun Kwang; Baek, Hyun Moo; Joo, HoSeon; Im, Yong-Taek, METALS AND MATERIALS INTERNATIONAL, v.21, no.2, pp.391 - 401, 2015-03 |
| Effect of pulse tube volume on dynamics of linear compressor and cooling performance in Stirling-type pulse tube refrigerator Ko, Junseok; Jeong, Sangkwon; Ki, Taekyoung, CRYOGENICS, v.50, pp.1 - 7, 2010-01 |
| Effect of pulsing parameters on drop transfer dynamics and heat transfer behavior in pulsed gas metal arc welding Zhao, Yangyang; Lee, Phill-Seung; Chung, Hyun, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.129, pp.1110 - 1122, 2019-02 |
| Effect of reduced cutaneous cues on motion perception and postural control Yi, Yong-Woo; Park, Su-Kyung, EXPERIMENTAL BRAIN RESEARCH, v.195, no.3, pp.361 - 369, 2009-05 |
| Effect of reentrant cavities on the thermal performance of a pulsating heat pipe Kim, Woo Kyoung; Kim, Sung Jin, APPLIED THERMAL ENGINEERING, v.133, pp.61 - 69, 2018-03 |
| Effect of sensor proximity over the non-conformal hologram plane in the near-field acoustical holography based on the inverse boundary element method Oey, Agustinus; Jang, Hae-Won; Ih, Jeong-Guon, JOURNAL OF SOUND AND VIBRATION, v.329, no.11, pp.2083 - 2098, 2010-05 |
| EFFECT OF SHIELDING GAS-PRESSURE IN LASER CUTTING OF SHEET METALS Na, Suck-Joo; YANG, YS; KOO, HM; KIM, TK, JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, v.111, no.3, pp.314 - 318, 1989-07 |
| Effect of size and orientation on stability of dislocation networks upon torsion loading and unloading in FCC metallic micropillars Gravell, J. D.; Lee, S.; Ryu, Seunghwa; Ryu, I, ACTA MATERIALIA, v.214, 2021-08 |
| Effect of solvent and PVP on electrode conductivity in laser-induced reduction process Lee, Hu Seung; Yang, Min-Yang, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, v.119, no.1, pp.317 - 323, 2015-04 |
| Effect of spanwise-varying local forcing on turbulent separated flow over a backward-facing step Chun, S; Lee, I; Sung, Hyung Jin, EXPERIMENTS IN FLUIDS, v.26, pp.437 - 440, 1999 |
| Effect of Stain Rate on Microstructure Evolution and Compressive Deformation Behavior of High-Strength Aluminum Coating Materials Fabricated by the Kinetic Spray Process Kim, Kyu-Sik; Lee, Changhee; Huh, Hoon; Lee, Kee-Ahn, MATERIALS TRANSACTIONS, v.56, no.4, pp.605 - 609, 2015 |
| Effect of Stator Slotting in the Magnetic Field Distribution of Linear Brushless Permanent Magnet Motor Myung-Jin Chung; M. G. Lee; S. Q. Lee; Dae-Gab Gweon, JOURNAL OF MAGNETICS, v.6, no.3, pp.101 - 107, 2001-09 |
| Effect of Strain Gradient on Elastic and Plastic Size Dependency in Polycrystalline Copper Choi, Jae-Hoon; Ryu, Hyemin; Lim, Kwang-Hyeok; Kim, Ji-Young; Kim, Hojang; Sim, Gi-Dong, INTERNATIONAL JOURNAL OF PLASTICITY, v.171, 2023-12 |
| Effect of Strain Localization on the Mechanical Properties from Nonuniform Grain Size Distribution of Ultralow Carbon Steel Kang, Chun Gu; Yoon, Jeong Whan, STEEL RESEARCH INTERNATIONAL, v.94, no.2, 2023-02 |
| Effect of strain rate on plastic anisotropy of advanced high strength steel sheets Huh, Jee-Hyang; Huh, Hoon; Lee, Chang-Soo, INTERNATIONAL JOURNAL OF PLASTICITY, v.44, pp.23 - 46, 2013-05 |
| Effect of Strontium Content on Chromium Deposition and Poisoning in Ba1-xSrxCo0.8Fe0.2O3-delta (0.3 <= x <= 0.7) Cathodes of Solid Oxide Fuel Cells Kim, Yu-Mi; Chen, Xinbing; Jiang, San Ping; Bae, Joong-Myeon, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, v.159, no.2, pp.B185 - B194, 2012-04 |
Effect of surface and internal defects on the mechanical properties of metallic glasses Kim, Sunghwan; Ryu, Seunghwa, SCIENTIFIC REPORTS, v.7, 2017-10 |
| Effect of surface non-flatness on the lubrication characteristics in the valve part of a swash-plate type axial piston pump Shin, Jung-Hun; Kim, Kyung-Woong, MECCANICA, v.49, no.5, pp.1275 - 1295, 2014-05 |
| Effect of surface pre-oxidation on laser assisted joining of acrylonitrile butadiene styrene (ABS) and zinc-coated steel Jung, Dae Jun; Cheon, Jason; Na, Suck-Joo, MATERIALS & DESIGN, v.99, pp.1 - 9, 2016-06 |
| Effect of surface roughness on friction in cold forging Jung, K.H.; Lee, H.C.; Kang, S.H.; Im, Yong-Taek, JOURNAL OF ACHIEVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING , v.31, no.2, pp.327 - 334, 2008-12 |
| Effect of Surface Roughness on the Adhesive Strength of the Heat-Resistant Adhesive RTV88 Cho, Tae Min; Choo, Yeon Seok; Lee, Min Jung; Oh, Hyeon Cheol; Lee, Byung Chai; Park, Tae Hak; Shin, Young Sug, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.23, no.15, pp.1875 - 1882, 2009 |
| Effect of Surface Treatment on the Mechanical Strength of Ultrasonically Bonded Chip on Copper-Coated Glass for Ultra-Fine Pitch Application in Microelectronics Jo, Jung-Lae; Lee, Jong-Bum; Lee, Jong-Gun; Jeon, Sung-Ho; Kim, Jong-Min; Shin, Young-Eui; Moon, Jeong-Hoon; et al, JAPANESE JOURNAL OF APPLIED PHYSICS, v.48, no.7, pp.07GA01 - 07GA04, 2009-07 |
| EFFECT OF SURFACE-ROUGHNESS ON A TURBULENT WALL-ATTACHING OFFSET JET YOON, SH; KIM, KC; KIM, DS; Chung, Myung Kyoon, EXPERIMENTS IN FLUIDS, v.19, no.1, pp.38 - 42, 1995-05 |
| Effect of swing arc on molten pool behaviors in narrow-gap GMAW of 5083 Al-alloy Zhu, Chenxiao; Cheon, Jason Hyeonpil; Tang, Xinhua; Na, Suck-Joo; Lu, Fenggui; Cui, Haichao, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.259, pp.243 - 258, 2018-09 |
| Effect of Tactile Feedback for Button GUI on Mobile Touch Devices Shin, Heesook; Lim, Jeong-Mook; Lee, Jong-Uk; Lee, Geehyuk; Kyung, Ki-Uk, ETRI JOURNAL, v.36, no.6, pp.979 - 987, 2014-12 |
| Effect of temperature on carbon nanoparticle collection efficiency using photoelectric ESP Kim, Woo-Jin; Jung, Jae-Hee; Song, Dong-Keun; Kim, Hak-Joon; Kim, Yong-Jin; Kim, Sang-Soo, SCIENCE OF THE TOTAL ENVIRONMENT, v.407, no.6, pp.2136 - 2141, 2009-03 |
| Effect of temperature on the transition in deformation modes in Mg single crystals Sim, Gi-Dong; Xie, Kelvin Y.; Hemker, Kevin J.; El-Awady, Jaafar A., ACTA MATERIALIA, v.178, pp.241 - 248, 2019-10 |
| EFFECT OF TENSILE SPEED ON THE FAILURE LOAD OF A SPOT WELD UNDER COMBINED LOADING CONDITIONS Song, Jung Han; Huh, Hoon, International Symposium on Impact Engineering, 2007 |
| Effect of tensile speed on the failure load of a spot weld under combined loading conditions Song, Jung-Han; Huh, Hoon; Lim, Ji-Ho; Park, Sung-Ho, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, v.22, no.9-11, pp.1469 - 1474, 2008-04 |
| Effect of the air-conditioning system on the fuel economy in a gasoline engine vehicle Lee, Jungwoo; Kim, Jaeheun; Park, Jungseo; Bae, Choongsik, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, v.227, pp.66 - 77, 2013 |
| Effect of the Core/Shell-Structured Meta-Aramid/Epoxy Nanofiber on the Mechanical and Thermal Properties in Epoxy Adhesive Composites by Electrospinning Oh, Hyun Ju; Kim, Hak Yong; Kim, Seong Su, JOURNAL OF ADHESION, v.90, no.9, pp.787 - 801, 2014-09 |
| Effect of the Prandtl number on heatup of a contained, stratified fluid Hyun, Jae Min, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, v.107, no.0, pp.982 - 984, 1985-01 |
| Effect of the ratio of coronary arterial lumen volume to left ventricle myocardial mass derived from coronary CT angiography on fractional flow reserve Taylor, Charles A.; Gaur, Sara; Leipsic, Jonathon; Achenbach, Stephan; Berman, Daniel S.; Jensen, Jesper M.; Dey, Damini; et al, JOURNAL OF CARDIOVASCULAR COMPUTED TOMOGRAPHY, v.11, no.6, pp.429 - 436, 2017-11 |
| Effect of the shape of imprinted alignment layer on the molecular orientation of liquid crystal Hah, Hyundae; Sung, Shi-Joon; Han, Manhee; Lee, Seung Seob; Park, Jung-Ki, MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, v.27, no.4, pp.798 - 801, 2007-05 |
| Effect of the size of the sheet with sheared protrusions on the deformed shape after springback Lee, Chang Whan; Yang, Dong-Yol, Materials and Design, v.95, pp.348 - 357, 2016-04 |
| Effect of the smart cure cycle on the performance of the co-cured aluminum/composite hybrid shaft Kim, HS; Park, SW; Hwang, HY; Lee, Dai Gil, COMPOSITE STRUCTURES, v.75, no.1-4, pp.276 - 288, 2006-09 |
| Effect of the unmixedness of unburned gases on the pressure fluctuations in a dump combustor Hong, Jung Goo; Oh, KC; Do Lee, U; Shin, Hyun Dong, ENERGY & FUELS, v.22, no.4, pp.2221 - 2228, 2008-07 |
| Effect of thermomechanical treatment on mechanical and electrical properties of Cu-Cr-Zr alloy in continuous hybrid process Joo, Ho Seon; Hwang, Sun Kwang; Im, Yong-Taek, Procedia Manufacturing, v.15, pp.1525 - 1532, 2018-08 |
| Effect of Time-Dependent Heating on the Onset of Rayleigh-Benard Convection Kim, Moon Uhn, JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, v.54, pp.933 - 941, 1985 |
| Effect of tip clearance on the cooling performance of a microchannel heat sink Min, Jung Yim; Jang, Seok Pil; Kim, SungJin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.47, no.5, pp.1099 - 1103, 2004-02 |
| Effect of titanium nitride inclusions on the mechanical properties of direct laser deposited Inconel 718 Lim, Kwang-Hyeok; Ryou, Ken Hee; Choi, Jae Hoon; Choi, Gwanghyo; Choi, Wonseok; Lee, Jeong Hwan; Oh, Chang-Seok; et al, EXTREME MECHANICS LETTERS, v.61, 2023-06 |
| Effect of transformation plasticity on residual stress fields in laser surface hardening treatment Yang, Y.-S.; Na, Suck-Joo, JOURNAL OF HEAT TREATING, v.9, no.1, pp.49 - 56, 1991-03 |
| Effect of tube alignment on the heat/mass transfer from a plate fin and two-tube assembly: naphthalene sublimation results Kim, JY; Song, Tae-Ho, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.46, no.16, pp.3051 - 3059, 2003-07 |
| Effect of typical modeling assumptions for pulverized coal char combustion commonly used in commercial CFD codes Kim, Daehee; Choi, Sangmin, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.29, no.11, pp.4951 - 4961, 2015-11 |
| Effect of unsintered gadolinium-doped ceria buffer layer on performance of metal-supported solid oxide fuel cells using unsintered barium strontium cobalt ferrite cathode Kim, Yu-Mi; Kim-Lohsoontorn, Pattaraporn; Bae, Joong-Myeon, JOURNAL OF POWER SOURCES, v.195, no.19, pp.6420 - 6427, 2010-10 |
| Effect of various driving forces on heat and mass transfer in arc welding Kim, WH; Fan, HG; Na, Suck-Joo, NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, v.32, no.6, pp.633 - 652, 1997 |
| Effect of Various Factors on the Operational Stability of Immobilized Cells for Acrylamide Production in a Packed-Bad Reactor Cheo Young Lee; Sang Kyo Choi; 김문언; 장호남, 한국화학공학회지, v.3, no.1, pp.36 - 45, 1993 |
| Effect of viscosity-inducing factors on oxygen transfer in production culture of bacterial cellulose Kim, SeongJun; Li, Hongxian; Oh, IlKwon; Kee, ChangDoo; Kim, MyongJun, KOREAN JOURNAL OF CHEMICAL ENGINEERING, v.29, no.6, pp.792 - 797, 2012-06 |
| Effect of vision coherent sensory cue on roll tilt perception and sensory weighting Lim, Hyerim; Park, Sukyung, Transactions of the Korean Society of Mechanical Engineers, v.36, no.11, pp.1091 - 1097, 2012-11 |
| Effect of wall heating on turbulent boundary layers with temperature-dependent viscosity Lee, Jin; Jung, Seo Yoon; Sung, Hyung Jin; Zaki, Tamer A., JOURNAL OF FLUID MECHANICS, v.726, pp.196 - 225, 2013-07 |
| Effect of wear debris on the tribological characteristics of carbon fiber epoxy composites Lee, Hak Gu; Hwang, Hui Yun; Lee, Dai Gil, WEAR, v.261, no.3-4, pp.453 - 459, 2006-08 |
| EFFECT OF WELD POOL DEFORMATION ON WELD PENETRATION IN STATIONARY GAS TUNGSTEN ARC-WELDING KIM, SD; Na, Suck-Joo, WELDING JOURNAL, v.71, no.5, pp.S179 - S193, 1992-05 |
| Effective Approach for Fabricating Highly Precise High-Curvature Structural Patterns via Air-Bubble Induction Song, Tae-Eun; Oh, Sang-Ah; Ahn, Chi Won; Oh, Il-Kwon; Jeon, Hwan-Jin, LANGMUIR, v.39, no.44, pp.15785 - 15791, 2023-10 |
| Effective control of optimum dressing according to gap increase by using multilayered neural networks Kim, Jeong-Du; Lee, ES, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.11, no.2, pp.120 - 126, 1996 |
| Effective direct writing of hierarchical 3D polymer micromeshes by continuous out-of-plane longitudinal scanning Ha, Cheol-Woo; Prabhakaran, Prem; Son, Yong; Lee, Kwang-Sup; Yang, Dong-Yol, MACROMOLECULAR RESEARCH, v.25, no.11, pp.1129 - 1134, 2017-11 |
| EFFECTIVE ELASTIC-MODULI IN FIBER-REINFORCED COMPOSITE WITH CIRCULAR-ARC SHAPED INTERFACIAL CRACKS Earmme, Youn-Young, INTERNATIONAL JOURNAL OF FRACTURE, v.71, no.1, pp.85 - 93, 1995 |
Discover
Open Access
Date issued
- 4,305 2020 - 2024
- 12,350 2010 - 2019
- 10,774 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989