Showing results 3001 to 3060 of 15773
Design of Conducting-Polymer-Free Highly Flexible Organic Light Emitting Diodes Having Oxide-Based Thin Film Encapsulation Layers. Kim, Eungjun; Yoo, Seunghyup; Choi, Kyung Cheol; Kim, Taek-Soo; Kwon, Jeong Hyun; Kim, Cheolgyu, The 2018 MRS Fall Meeting & Exhibit, Materials Research Society, 2018-11-26 |
Design of cryogenic free-piston reciprocating expander for high expansion ratio 차정민; 박지호; 고준석; 김효봉; 정상권, 2015 초전도 저온 학술연합회 동계학술대회, 한국초전도.저온공학회, 2014-02-26 |
Design of cryogenic free-piston reciprocating expander for high expansion ratio Cha, Jeongmin; Park, Jiho; Ko, Junseok; Kim, Hyobong; Jeong, Sang-Kwon, 9th Japan-Korea-China student symposium, Tokyo Institute of Technology, 2015-03-20 |
Design of decoupled dual servo stage with voice coil motor and linear motor for XY long stroke uItra-precision scanning system Kim K.-H.; Choi Y.-M.; Gweon, Dae-Gab; Hong D.-P.; Kim K.-.S.; Lee S.; Lee M.-G., ICMIT 2005: Mechatronics, MEMS and Smart Materials, v.6040, 2005-09-20 |
Design of Dielectric Elastomer Robot Powered by Triboelectric Nanogenerator Ma, JiHyeong; Lee, Nakhyeong; Kyung, Ki-Uk, 35th IEEE/RSJ International Conference on Intelligent Robots and Systems, IEEE, 2022-10-26 |
Design of Diesel Fuel Reformer and Balance of Plants for Solid Oxide Fuel Cell based Auxiliary Power Unit (APU) System Applications Oh, Jiwoo; Bae, Joongmyeon; Bae, Minseok; 김동연; Katikaneni, Sai P, Chemindix 2016, Chemindix, 2016-11-21 |
Design of distributed JT (Joule-Thomson) effect heat exchanger for superfluid 2 K cooling device Jeong, Sangkwon; Park, C; Kim, K, 28th International Conference on Low Temperature Physics, LT 2018, IOP Publishing, 2017-08 |
Design of Dry Dual Clutch Transmission Actuator Controller for Simultaneous Kissing Point Identification Using Multiple Sliding Surfaces Oh, Jiwon; Kim, Jinsung; Choi, Seibum B, 13th International Conference on Control, Automation and Systems, 제어로봇시스템학회, 2013-10-22 |
Design of Electromagnet-based Soft Actuator for Wearable Motion Guidance System Jeong, Seung Mo; Mun, Heeju; Lim, Sein; Kyung, Ki-Uk, IEEE World Haptics 2023 Conference, Institute of Electrical and Electronics Engineers (IEEE), 2023-07-11 |
Design of Estimators for the Output Shaft Torque of Automated Manual Transmission Systems Oh, Jiwon; Kim, Jinsung; Choi, Seibum B, The 8th IEEE Conference on Industrial Electronics and Applications, pp.1370 - 1375, IEEE, 2013-06-21 |
Design of experiment based reliability analysis and optimization augmented by response surface method for efficiency Kwak, Byung Man, CJK-OSM, pp.113 - 118, 2004 |
Design of Fabric Based Soft Surface Electromyography Sensor and Application to Respiratory Muscles Assessment Jeong, HwaYeong; Kim, Jung; Feng, Jirou, 20th International Conference on Control, Automation and Systems, Institute of Control, Robotics and Systems, 2020-10-16 |
Design of Feed-forward Controller with Stick-slip Friction Modeling in Electromechanical Brake System Park, Gi Seo; Jung, Sanghun; Choi, Seibum B, 2016 International Conference on Mechanical Automation and Control Engineering, IACSIT, 2016-02-28 |
Design of flexural stage considering multiple constraints using smooth boundary topology optimization Kwak, Byung Man, WCSMO-7(7th World Congress on Structural and Multidisciplinary Optimization), pp.1724 - 1731, 2007 |
Design of flexural stage using smooth boundary topology optimization Kwak, Byung Man, China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, pp.41 - 46, 2006 |
Design of Foothold Decision Model in Convex Model Predictive Control for Legged Robots Kim, Min-Gyu; Hong, Seungwoo; Kim, Joon-Ha; Park, Hae-Won, 9th International Conference on Robot Intelligence Technology and Applications (RiTA), pp.24 - 34, SPRINGER INTERNATIONAL PUBLISHING AG, 2021-12 |
Design of four joints and three links biped robot and its gaits Kim, SH; Oh, Jun-Ho; Lee, KH, International Conference on intelligent Robots and Systems, pp.295 - 300, IAS, 2000-07 |
Design of Gate System in Injection Molding of a Dashboard by CAMPmold Choi, D. S.; Han, K. H.; Kim, H. S.; Im, Yong-Taek, The Japan-Korea Plastics Processing Joint Seminar, pp.33 - 39, 2003-04 |
Design of heat sinks using topology optimization in natural convection Joo, Younghwan; Kim, Sung-Jin, The 27th International symposium on transport phenomena, PCTFE, JSME, HTSJ, 2016-09 |
Design of HEV-Relay Using Response Surface Method to Improve Bounce Characteristics Ko, Y.K.; Cho, S.S.; Huh, Hoon; Lee, S.Y.; Park, H.T.; Oh, I.S., IEEE International Symposium on Industrial Electronics, IEEE ISIE 2009, pp.169 - 174, IEEE, 2009-07-05 |
Design of Highly Flexible Organic Light Emitting Diodes Having Oxide-Based Transparent Electrodes and Thin Film Encapsulation layers. Kim, Eungjun; Yoo, Seunghyup; Choi, Kyung Cheol; Kim, Taek-Soo; Kwon, Jeong Hyun; Kim, Cheolgyu, The 12th International Conference on Electroluminescence and Optoelectronic Devices (ICEL 2018), Seoul National University, 2018-10-15 |
Design of hollow section extrusion process for manufacturing a triply-connected rectangular tubular section with improved flow control Yang, Dong-Yol; Park, K., CIRP1999, 1999 |
Design of Hybrid Electromagnetic Type Active Vibration Damper for Passenger Vehicles Lee, B. H.; Lee, Chong-Won, The 8th International Conference on Motion and Vibration Control, MOVIC 2006, pp.558 - 563, MOVIC, 2006-08 |
Design of hybrid haptic simulator for rendering car door opening and closing Ma, JiHyeong; Kim, Jisung; Kyung, Ki-Uk, AsiaHaptics 2022, AsiaHaptics, 2022-11-11 |
Design of Hybrid Position/Force Engagement Controller for Dry Dual Clutch Transmission without Diaphragm Spring Oh, Jiwon; Choi, Seibum B, 2014 American Control Conference (ACC), pp.2618 - 2623, The American Automatic Control Council, 2014-06-05 |
Design of idle motions for service robot via video ethnography Song H.; Kim M.J.; Jeong S.-H.; Suk H.-J.; Kwon, Dong-Soo, 18th IEEE International Symposium on Robot and Human Interactive, RO-MAN 2009, pp.195 - 199, 2009-09-27 |
Design of idle motions for service robot via video ethnography Song, HS; Kim, MJ; Kwon, Dong-Soo; Suk, Hyeon-Jeong; Jeong, SH, 18th IEEE International Symposium on Robot and Human Interactive, pp.195 - 199, IEEE Ro-man, 2009-09-27 |
Design of KAIST HOUND, a Quadruped Robot Platform for Fast and Efficient Locomotion with Mixed-Integer Nonlinear Optimization of a Gear Train Shin, Young-Ha; Hong, Seungwoo; Woo, Sangyoung; Choe, JongHun; Son, Harim; Kim, Gijeong; Kim, Joon-Ha; et al, 39th IEEE International Conference on Robotics and Automation, ICRA 2022, pp.6614 - 6620, Institute of Electrical and Electronics Engineers Inc., 2022-05 |
Design of Learning Input Shaping Technique for Suppressing Residual Vibration of an Industrial Robot Pyung-Hun Chang, Mechatronics Forum International Conference, 2000 |
Design of Lightweight Robot Gripper Riffard, Y.; Chung, S. Y.; Lee, Doo Yong, the 32nd International Symposium on Robotics, 2001-04-19 |
Design of long stroke dual servo 6-axis actuator Kim, K.H.; Kim, M.; Moon, M.G.; Gweon, Dae-Gab, The 1st Korea-japan conference on positioning technology, pp.168 - 171, 2002-10-15 |
Design of Lorentz force type integrated motor-bearing system using permanent magnets and concentrated windings Park, S.-H.; Lee, Chong-Won; Okada, Y., Proceeding of the 2004 the Eleventh World Congress in Mechanism and Machine Science, pp.312 - 316, World Congress in Mechanism and Machine Science, 2004-04-01 |
Design of Magnetically Suspended Frictionless manipulator Yoon Keun Kwak, 대한기계학회, pp.323 - 335, 1995-05-01 |
Design of Magneto-rheological Fluid Based Device Kim, Jeong-Hoon; Lee, Chong-Won; Jung, Byung-Bo; Park, Youngjin, Proceedings of the 9th Asia Pacific Vibration Conference, pp.544 - 549, 2001-10 |
Design of master console robot for natural orifice transluminal endoscopic surgery Sukhoon P.; Bin L.K.; Muk J.J.; Yoon, Yong-San, ICROS-SICE International Joint Conference 2009, ICCAS-SICE 2009, pp.1152 - 1157, 2009-08-18 |
Design of Master Device Featured Redundant Joint for 4-DOFs Slave of Flexible Surgery Robot Ahn, Jeongdo; Kwon, Dong-Soo, The Hamlyn Symposium on Medical Robotics 2019, UK-Robotics and Autonomous Systems (UK-RAS) Network, 2019-06-26 |
Design of Master Manipulator to Control Slave with Redundant Degreee of Freedom for Laparoscopy Surgery Park, S.H; Park, Y.B; Ko, B.H; Lim, K.B; Yoon, Yong-San, World Congress on Medical Physics and Biomedical Engineering, 2006-08 |
Design of Mechanical Elements With Composite Materials Lee, D.G.; Kwak, Yoon Keun; Whang, P.S.; Kim, Y.H.; Lee, Ju-Jang, Composite Materials Symposium, Composite Materials Symposium, 1988 |
Design of Mechanical Elements with Composite Materials. 이대길, 한국복합재료심포지움, v.0, no.0, pp.0 - 0, 1987 |
Design of Mechanical Impedance Reduction Controller for Vehicle Power Door System Seo, Hyun Seok; Kong, Kyoungchul; Kim, hyeongjun; Kim, Taeyeon; Park, Jeongsu, 22nd IFAC World Congress 2023, International Federation of Automatic Control (IFAC), 2023-07-10 |
Design of Medical Robot for Total Hip Replacement Surgery 이정주; 권동수, Proceeding of the Korea Society of Mechanical Engineers 2000 Dynamics & Control Devision Summer Annual Conference, pp.253 - 260, 2000-07 |
Design of micro Total Reflective Type Extrinsic Fabry-Perot Interferometric Fiber Optic Force Sensor Heo, J; Lee, Jungju; Lim, J, Design of micro Total Reflective Type Extrinsic Fabry-Perot Interferometric Fiber Optic Force Sensor, pp.0 - 0, AMDP, 2002-10 |
Design of micro Total Reflective Type Extrinsic Fabry-Perot Interferometric Fiber Optic Force Sensor for the Bioinstrumentation and Medical Applicatio Lee, Jungju, Design and Nature, pp.0 - 0, 2002-09-01 |
Design of Model-based Controller with Disturbance Estimation in Steer-by-wire System Jung, Sanghun; Choi, Seibum B, 2nd International Conference on Mechanical, Aeronautical and Automotive Engineering (ICMAA), International Conference on Mechanical, Aeronautical and Automotive Engineering, 2018-02-27 |
DESIGN OF MULTI-CHANNEL SPECTRAL DETECTOR FOR CONFOCAL SCANNING MICROSCOPY Song, IC; Lee,SW; Kim, TH; Gweon, Dae-Gab, Focus on Microscopy 2007, 2007-04-10 |
Design of multi-joint tracked robot for adaptive uneven terrain driving Dooyeol K.; Kyunghak H.; Kim, Soohyun, 4th International Conference on Autonomous Robots and Agents, ICARA 2009, pp.464 - 469, 123, 2009-02-10 |
Design of Multifunctional Structural Composite Battery using Interfacial Prediction and Multiphysics Modelling Raja, Mohamad Ahmad; 김성수; 전도윤; 임수현, 2023년도 한국복합재료학회 춘계학술대회, 한국복합재료학회, 2023-04-19 |
Design of multiple-degree-of-freedom endoscope that overcomes spatial disorientation problems in trans-gastric NOTES Lee, Hyun-young; Ryou, Myoung-Han; Kong, Duk-yoo; Kwon, Dong-Soo, URAI 2014, URAI 2014, 2014-11-12 |
Design of Near-Field Thermophotovoltaic System with Hyperbolic Metamaterials and Multilayered Graphene Lim, Mikyung; Kim Jihoon; Lee, Seung-Seob; Lee, Bong Jae, 1st Asian Conference on Thermal Sciences (ACTS), The Korean Society of Mechanical Engineers, 2017-03-27 |
Design of New Micro Actuator for Tactile Display Yang, TH; Kim, SY; Kwon, Dong-Soo, Proceedings of the 17th World Congress The International Federation of Automatic Control, pp.14693 - 14698, 2008-07-06 |
Design of non-flammable mixed refrigerant Joule-Thomson refrigerator for precooling stage of high temperature superconducting power cable Lee, Cheon Kyu; Lingxue, Jin; Jeong, Sang Kwon, The 8th Asian Conference on Applied Superconductivity and Cryogenics, Institute of Refrigeration and Cryogenics, Zhejiang University, 2015-11-24 |
Design of non-thermal dicing system for quartz wafers Han, S; Kim, Y; Kim,YJ; Kim, S; Park, S; Park, J; Kim, Seung-Woo, the10th International Symposium on Measurement Technology and Intelligent Instruments, International Symposium on Measurement Technology and Intelligent Instruments, 2011-06-29 |
Design of Non-thermal Dicing System for Quartz Wafers Han, S; Kim, Y; KIM, Young-Jin; Kim, S; Park, S; Park, J; Kim, Seung-Woo, The 10th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2011), ICMI (The International Committee on Measurements and Instrumentation), 2011-07 |
Design of Novel Haptic Mouse and Its Applications Choi H.; Kwon, Dong-Soo; Kim M.-S., IEEE/RSJ International Conference on Intelligent Robots and Systems, 2003, v.3, pp.2260 - 2265, 2003-10-27 |
Design of Novel Prosthetic Wrist Using Shape Memory Alloy Actuators and Rolling Contact Joint with sEMG Control Chung, Chongyoung; Hyeon, Kyujin; Ma, JiHyeong; Kyung, Ki-Uk, IEEE International Conference on Robot and Human Interactive Communication 2023, Institute of Electrical and Electronics Engineers (IEEE), 2023-08-29 |
Design of Observer for Vehicle Stability Control System 곽병학; 노현석; 박영진, 대한기계학회 1999년 춘계학술대회 논문집, pp.65 - 69, 대한기계학회, 1999 |
Design of passive tuned vibration absorber for linear cryogenic cooler vibration suppression in space application Kim Y.-K.; Kim H.-B.; Kim E.; Kim, Kyung-Soo, 60th International Astronautical Congress 2009, IAC 2009, v.7, pp.5963 - 5967, 2009-10-12 |
Design of Position and Force Sensors of the Haptic Interface for Training Simulation of Radial Artery Puncture LI, CHENGJIE; Li, Dezhou; Lee, Doo Yong, 2016 16th International Conference on Control, Automation and Systems (ICCAS 2016), pp.93 - 97, ICCAS 2016, 2016-10-17 |
Design of Precision Force-Balance Acceleration for Motion Control Oh, Jun-Ho, Int. Conf. on Automation, pp.12 - 14, 1995-12 |
Design of Precision Process using Three-Dimensional Rigid-Plastic Finite Element Analysis Yang, Dong-Yol; Park, K.; Kang, Y. S., CIRP STC , 1997-01-01 |
Discover