Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Article
Showing results 301 to 360 of 12248
| A hyperelastic adhesive forming multiple neutral planes even at extreme temperatures Jeong, Kihoon; Kim, Dohun; AHN, DAHYE; Yang, Chanhee; Kim, Junmo; Lee, ChangHyeon; Kim, Youson; et al, CHEMICAL ENGINEERING JOURNAL, v.480, 2024-01 |
A Janus emitter for passive heat release from enclosures Heo, Se-Yeon; Lee, Gil Ju; Kim, Hyeon; Kim, Yeong Jae; Ishii, Satoshi; Kim, Min Seok; Seok, Tae Joon; et al, SCIENCE ADVANCES, v.6, no.36, pp.eabb1906, 2020-09 |
| A Joint Fermi-GBM and LIGO/Virgo Analysis of Compact Binary Mergers from the First and Second Gravitational-wave Observing Runs Hamburg, R; Noh, Minkyun, ASTROPHYSICAL JOURNAL, v.893, no.2, 2020-04 |
| A KAPPA-EPSILON-GAMMA EQUATION TURBULENCE MODEL CHO, JR; Chung, Myung Kyoon, JOURNAL OF FLUID MECHANICS, v.237, pp.301 - 322, 1992-04 |
| A knee-specific finite element analysis of the human anterior cruciate ligament impingement against the femoral intercondylar notch Park, Hyung-Soon; Ahn, Chulhyun; Fung, David T.; Ren, Yupeng; Zhang, Li-Qun, JOURNAL OF BIOMECHANICS, v.43, no.10, pp.2039 - 2042, 2010-07 |
| A knowledge-based expert system for roll pass and profile design for shape rolling of round and square bars Kim, SH; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.90Special, no.SI, pp.145 - 151, 1999-05 |
| A laboratory experiment on the surface and internal waves in two-layered fluids Ko, Donghyeong; Cho, Yeunwoo, OCEAN ENGINEERING, v.146, pp.257 - 267, 2017-10 |
| A LAMINATED COMPOSITE BEAM ELEMENT SEPARATELY INTERPOLATED FOR THE BENDING AND SHEARING DEFLECTIONS WITHOUT INCREASE IN NODAL DOF KOO, JS; Kwak, Byung Man, COMPUTERS STRUCTURES, v.53, no.5, pp.1091 - 1098, 1994-12 |
| A land vehicle tracking algorithm using stand-alone GPS Kim J.-H.; Oh, Jun-Ho, CONTROL ENGINEERING PRACTICE, v.8, no.10, pp.1189 - 1196, 2000-10 |
| A large-scale structural mixing model applied to blowout of turbulent non-premixed jet flames in a cross air-flow Lee, KM; Shin, Hyun Dong, JOURNAL OF THE INSTITUTE OF ENERGY, v.70, no.485, pp.128 - 140, 1997-12 |
| A laser-induced thermal spray printing process for phosphor layer deposition of PDP Lee, Jae Hak; Yoo, Choong Don; Kim, Yong-Seok, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, v.17, no.2, pp.258 - 264, 2007 |
| A laterally driven symmetric micro-resonator for gyroscopic applications Hong, YS; Lee, JH; Kim, Soohyun, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, v.10, no.3, pp.452 - 458, 2000-09 |
| A learning-based approach to surface vehicle dynamics modeling for robust multistep prediction Jang, Junwoo; Lee, Changyu; Kim, Jinwhan, AUTONOMOUS ROBOTS, v.47, no.6, pp.797 - 808, 2023-08 |
| A linear air bearing stage with active magnetic preloads for ultraprecise straight motion Ro, Seung-Kook; Kim, Soohyun; Kwak, Yoon Keun; Park, Chun Hong, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, v.34, pp.186 - 194, 2010-01 |
| A load balancing algorithm for the parallel automated multilevel substructuring method Hyun, Cheolgyu; Lee, Phill-Seung, COMPUTERS & STRUCTURES, v.257, 2021-12 |
| A local heating method by near-infrared rays for forming of non-quenchable advanced high-strength steels Lee, Eun Ho; Hwang, June Sun; Lee, Chang Whan; Yang, Dong-Yol; Yang, Woo-Ho, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.214, no.4, pp.784 - 793, 2014-04 |
| A locally refinable T-spline finite element method for CAD/CAE integration Uhm, TK; Kim, KS; Seo, Yu-Deok; Youn, Sung-Kie, STRUCTURAL ENGINEERING AND MECHANICS, v.30, no.2, pp.225 - 245, 2008-09 |
| A Lorentz force type self-bearing motor with new 4-pole winding configuration Kim, SJ; Abe, K; Kanebako, H; Okada, Y; Lee, Chong-Won, JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, v.46, no.2, pp.349 - 354, 2003-06 |
| A low-Reynolds-number, four-equation heat transfer model for turbulent separated and reattaching flows Rhee, Gwang Hoon; Sung, Hyung Jin, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, v.18, no.1, pp.38 - 44, 1997-02 |
| A lubricant-infused slip surface for drag reduction Kim, Seung Joong; Kim, Hae Nyeok; Lee, Sang Joon; Sung, Hyung Jin, PHYSICS OF FLUIDS, v.32, no.9, 2020-09 |
| A macro plane triangle element from the individual element test Eom, Jaesung; Ko, Jinhwan; Lee, Byung Chai, FINITE ELEMENTS IN ANALYSIS AND DESIGN, v.45, no.6-7, pp.422 - 430, 2009-05 |
| A manufacturing process using the infrared ray local heating method for seat cross members Lee, Eun Ho; Yang, Dong-Yol; Yoon, Jeong Whan; Yang, Woo-Ho, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.89, no.9-12, pp.3299 - 3305, 2017-04 |
| A master manipulator with a remote-center-of-motion kinematic structure for a minimally invasive robotic surgical system Lee, Hyunyoung; Cheon, Byungsik; Hwang, Minho; Kang, Dong-Hoon; Kwon, Dong-Soo, INTERNATIONAL JOURNAL OF MEDICAL ROBOTICS AND COMPUTER ASSISTED SURGERY, v.14, no.1, 2018-02 |
| A mathematical model for analyzing the thermal characteristics of a flat micro heat pipe with a grooved wick Do, KH; Kim, SungJin; Garimella, SV, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.51, pp.4637 - 4650, 2008-09 |
| A mathematical model for the territorial competition of the subterranean termites Coptotermes formosanus and Reticulitermes flavipes (Isoptera: Rhinotermitidae) Jeon, Wonju; Lee, Sang-Hee, APPLIED ENTOMOLOGY AND ZOOLOGY, v.49, no.4, pp.579 - 590, 2014-11 |
| A mathematical model of gas tungsten arc welding considering the cathode and the free surface of the weld pool Kim, W. -H.; Fan, H. G.; Na, Suck-Joo, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, v.28, no.4, pp.679 - 686, 1997-08 |
| A Mathematical Study on a Unified Variational Principle with Two Constrained Parameters J.S.Im; Y.M.Yoo; B.C.Lee; Y.J.Lee, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.13, no.9, pp.630 - 639, 1999 |
| A Measure of Active Interfaces in Supported Catalysts for High-temperature Reactions Lee, Siwon; Ha, Hyunwoo; Bae, Kyung Taek; Kim, Seunghyun; Choi, Hyuk; Lee, Juhyeok; Kim, Jun Hyuk; et al, CHEM, v.8, no.3, pp.815 - 835, 2022-03 |
| A measurement method of the flow rate in a pipe using a microphone array Kim, YB; Kim, Yang-Hann, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.112, no.3, pp.856 - 865, 2002-09 |
| A Mechanical DEsign of a Quadruped Walking Machine for Faster Speed in Static Level Walking Yoon, Yong-San; hong hj, SME TRANSACTIONS ON ROBOTICS RESEARCH, v.1, no.2, pp.1 - 10, 1989 |
| A mechanical model of stereocilia that demonstrates a shift in the high-sensitivity region due to the interplay of a negative stiffness and an adaptation mechanism Lee, Changwon; Park, Sukyung, BIOINSPIRATION & BIOMIMETICS, v.7, no.4, 2012-12 |
| A mechanical model of the gating spring mechanism of stereocilia Lim, Koeun; Park, Sukyung, JOURNAL OF BIOMECHANICS, v.42, no.13, pp.2158 - 2164, 2009-09 |
| A mechanism of spatter production from the viewpoint of the integral of specific current action Kang, SK; Na, Suck-Joo, WELDING JOURNAL, v.84, no.12, pp.188S - 196S, 2005-12 |
| A mechanistic model for fatigue life prediction of solder joints for electronic packages Lee, Soon-Bok; Kim, JK, INTERNATIONAL JOURNAL OF FATIGUE, v.19, no.1, pp.85 - 91, 1997-01 |
| A mechanistic model for nucleate pool boiling including the effect of bubble coalescence on area fractions Kim, Minchang; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.163, pp.120453, 2020-12 |
| A mechanistic model of critical heat flux for pool boiling based on supply failure mechanisms depending on the contact angle Kim, Minchang; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.209, 2023-08 |
| A Mechatronic Mirror-Image Motion Device for Symmetric Upper-Limb Rehabilitation Kyeong, Seulki; Na, Youngjin; Kim, Jung, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.21, no.5, pp.947 - 956, 2020-05 |
| A method and tool for human-human interaction and instant collaboration in CSCW-based CAD He, Fazhi; Han, Soonhung, COMPUTERS IN INDUSTRY, v.57, no.8-9, pp.740 - 751, 2006-12 |
| A method for automatic generation of parametric computer aided design models in a mold base e-Catalog system Mun, Duhwan; Kim, Heungki; Jang, Kwangsub; Cho, Junmyun; Kim, Junhwan; Han, Soonhung, JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING, v.6, no.3, pp.308 - 314, 2006-09 |
| A method for computation of discontinuous wave propagation in heterogeneous solids: basic algorithm description and application to one-dimensional problems Park, K. C.; Lim, S. J.; Huh, Hoon, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, v.91, no.6, pp.622 - 643, 2012-08 |
| A method for identification of analyte concentration in aqueous solution by using a mistuned fluid-structure coupled vibration Chen, Yugang; Park, Kang-Jae; Lee, Bomi; Park, Yong-Hwa, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.35, no.2, pp.481 - 486, 2021-02 |
| A method for multidimensional wave propagation analysis via component-wise partition of longitudinal and shear waves Cho, S. S.; Park, K. C.; Huh, Hoon, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, v.95, no.3, pp.212 - 237, 2013-07 |
| A METHOD FOR THE MEASUREMENT OF RESIDUAL-STRESSES USING A FRACTURE-MECHANICS APPROACH KANG, KJ; Song, Ji Ho; Earmme, Youn-Young, JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, v.24, no.1, pp.23 - 30, 1989-01 |
| A method for topological entity correspondence in a replicated collaborative CAD system Jing, Shu-xu; He, Fa-zhi; Han, Soonhung; Cai, Xian-tao; Liu, Hua-Jun, COMPUTERS IN INDUSTRY, v.60, no.7, pp.467 - 475, 2009-09 |
| A method for verification of computer-aided design model errors Yang, J; Han, Soonhung; Park, S, JOURNAL OF ENGINEERING DESIGN, v.16, no.3, pp.337 - 352, 2005-06 |
| A method of measurement for determination of relative density in the axisymmetric forming of sintered porous material Moon, JH; Yang, Dong-Yol, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.33, no.3, pp.311 - 318, 1992-09 |
| A method of transmissibility design for dual-chamber pneumatic vibration isolator Lee, Jeung-Hoon; Kim, Kwang-joon, JOURNAL OF SOUND AND VIBRATION, v.323, no.1-2, pp.67 - 92, 2009-06 |
| A method of wall absorption treatment for enhancing the speech intelligibility at a directional microphone array in a room Ko, Byeong-Yun; Ih, Jeong-Guon; Cho, Wan-Ho, JOURNAL OF THE ACOUSTICAL SOCIETY OF KOREA, v.40, no.6, pp.649 - 659, 2021-11 |
| A METHOD TO DETERMINE THE COMPLEX MODULUS AND POISSON RATIO OF VISCOELASTIC MATERIALS FOR FEM APPLICATIONS SIM, S; Kim, Kwang-joon, JOURNAL OF SOUND AND VIBRATION, v.141, no.1, pp.71 - 82, 1990-08 |
| A method to exchange procedurally represented 2D CAD model data using ISO 10303 STEP Kim, Byung Chul; Mun, Duhwan; Han, Soonhung; Pratt, Michael J., COMPUTER-AIDED DESIGN, v.43, no.12, pp.1717 - 1728, 2011-12 |
| A method to minimise the cross-talk of the Wigner-Ville distribution Park, YK; Kim, Yang-Hann, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, v.11, no.4, pp.547 - 559, 1997 |
| A Mew Method for Enumeration of Planar Kinematic Chains by Enumerating Binary Chains Kim, JT; Kwak, Byung Man, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, v.0, no.0, pp.0 - 0, 1990 |
| A micro total reflective extrinsic fabry-parot interferometric fiber optic pressure sensor for medical application Heo, J.S.; Lee, Jungju; Lim, J.O., INTERNATIONAL JOURNAL OF MODERN PHYSICS B, v.17, no.8-9 , pp.1199 - 1204, 2003-04 |
| A microcrack propagation-based life prediction model for lithium-ion batteries with Ni-rich cathode materials Park, Sun Ho; Lee, Hyobin; Park, Joonam; Roh, Youngjoon; Byun, Seoungwoo; Lim, Jaejin; Jung, Seungwon; et al, JOURNAL OF ENERGY STORAGE, v.58, 2023-02 |
| A microfluidic 3D in vitro model for specificity of breast cancer metastasis to bone Bersini, Simone; Jeon, Jessie Sungyun; Dubini, Gabriele; Arrigoni, Chiara; Chung, S; Charest, Joseph L; Moretti, Matteo; et al, BIOMATERIALS, v.35, no.8, pp.2454 - 2461, 2014-03 |
| A Microfluidic Stretch System Upregulates Resistance Exercise-Related Pathway Ahn, Jisong; Kim, Jaesang; Jeon, Jessie S.; Jang, Young Jin, BIOCHIP JOURNAL, v.16, no.2, pp.158 - 167, 2022-06 |
| A micromechanics-based analytical solution for the effective thermal conductivity of composites with orthotropic matrices and interfacial thermal resistance Lee, Sangryun; Lee, Jinyeop; Ryu, Byungki; Ryu, Seunghwa, SCIENTIFIC REPORTS, v.8, 2018-05 |
| A Microprocessor-Based Electrode Movement Controller for Spot Weld Quality Assurance Cho, Hyungsuck; Chun, D. W., IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, v.32, no.3, pp.234 - 238, 1985-08 |
| A MICROPROCESSOR-BASED SHAPE AND VELOCITY CONTROL-SYSTEM FOR PLASMA-ARC CUTTING Na, Suck-Joo; PARK, SW; CHO, SH; LHO, TJ, WELDING JOURNAL, v.67, no.2, pp.27 - 33, 1988-02 |
| A micropump operating with chemically produced oxygen gas Choi, YH; Son, SU; Lee, Seung Seob, SENSORS AND ACTUATORS A-PHYSICAL, v.111, no.1, pp.8 - 13, 2004-03 |
Discover
Open Access
Date issued
- 4,075 2020 - 2024
- 12,322 2010 - 2019
- 10,774 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989