Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Article
Showing results 2281 to 2340 of 12331
| Conduction/radiation combined heat transfer with contact resistance for application to vacuum insulation Lee, Jaehyug; Song, Tae-Ho, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.129, pp.380 - 388, 2019-02 |
| Conductive particles embedded carbon composite bipolar plates for proton exchange membrane fuel cells Lim, Jun Woo; Kim, Minkook; Lee, Dai Gil, COMPOSITE STRUCTURES, v.108, pp.757 - 766, 2014-02 |
| Conductivity of films made from single-walled carbon nanotubes in terms of bundle diameter Shin, Dong Hun; Shim, Hyung Cheoul; Song, Jin-Won; Kim, Soohyun; Hana, Chang-Soo, SCRIPTA MATERIALIA, v.60, no.8, pp.607 - 610, 2009-04 |
| Conductivity Relaxation of Proton-Conducting BaCe0.85Y0.15O3-delta Upon Oxidation and Reduction Lim, D. -K.; Choi, M. -B.; Lee, K. -T.; Yoon, H. -S.; Wachsman, E. D.; Song, S. -J., JOURNAL OF THE ELECTROCHEMICAL SOCIETY, v.158, no.8, pp.B852 - B856, 2011-08 |
| Conductor microstructures by laser curing of printed gold nanoparticle ink Chung, JW; Ko, Seung Hwan; Bieri, NR; Grigoropoulos, CP; Poulikakos, D, APPLIED PHYSICS LETTERS, v.84, no.5, pp.801 - 803, 2004-02 |
Confidence Analysis of Feature Points for Visual-Inertial Odometry of Urban Vehicles Lee, Chang-Ryeol; Yoon, Kuk-Jin, IET INTELLIGENT TRANSPORT SYSTEMS, v.13, no.7, pp.1130 - 1138, 2019-07 |
| Confidence-Based Data Association and Discriminative Deep Appearance Learning for Robust Online Multi-Object Tracking Bae, Seung-Hwan; Yoon, Kuk-Jin, IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE, v.40, no.3, pp.595 - 610, 2018-03 |
| Confidence-Based Design Optimization for a More Conservative Optimum under Surrogate Model Uncertainty Caused by Gaussian Process Jung, Yongsu; Kang, Kyeonghwan; Cho, Hyunkyoo; Lee, Ikjin, JOURNAL OF MECHANICAL DESIGN, v.143, no.9, 2021-09 |
| Configurable Crack Wall Conduction in a Complex Oxide Yeo, Youngki; Hwang, Soo-Yoon; Yeo, Jinwook; Kim, Jihun; Jang, Jinhyuk; Park, Heung-Sik; Kim, Yong-Jin; et al, NANO LETTERS, v.23, no.2, pp.398 - 406, 2023-01 |
| Confined cavity on a mass-producible wrinkle film promotes selective CO(2)reduction Cho, Kyeong Min; Jung, Woo-Bin; Kim, Donggyu; Kim, Ju Ye; Kim, Yesol; Yun, Geun-Tae; Ryu, Seunghwa; et al, JOURNAL OF MATERIALS CHEMISTRY A, v.8, no.29, pp.14592 - 14599, 2020-08 |
| Confinement of infrared radiation to nanometer scales through metallic slit arrays Lee, Bong Jae; Chen, Y. -B.; Zhang, Z. M., JOURNAL OF QUANTITATIVE SPECTROSCOPY RADIATIVE TRANSFER, v.109, no.4, pp.608 - 619, 2008-03 |
| Confocal Scanning Microscopy : a High-Resolution Nondestructive Surface Profiler Yoo, Hongki; Lee, Seungwoo; Kang, Dongkyun; Kim, Taejoong; Gweon, Dae-Gab; Lee, Sukwon; Kim, Kwangsoo, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.7, no.4, pp.3 - 7, 2006-10 |
| Conjugate heat and mass transfer in metal hydride beds in the hydriding process Guo, Zhixiong; Sung, Hyung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.42, no.2, pp.379 - 382, 1999-01 |
| Conjugate heat transfer by oscillating flow in a parallel-plate channel subject to a sinusoidal wall temperature distribution Jo, Jaeyeong; Kim, Sung Jin, APPLIED THERMAL ENGINEERING, v.123, pp.1462 - 1472, 2017-08 |
| Conjugate mixed convection in a channel: Modified five percent deviation rule Choi, CY; Kim, SungJin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.39, no.6, pp.1223 - 1234, 1996-04 |
| Connected evaluation of polymer electrolyte membrane fuel cell with dehydrogenation reactor of liquid organic hydrogen carrier Lee, Sanghun; Han, Gwangwoo; Kim, Taehong; Yoo, Young-Sung; Jeon, Sang-Yun; Bae, Joongmyeon, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.45, no.24, pp.13398 - 13405, 2020-05 |
| Connection Loss Detection Algorithm of Parallel-connected Cells Based on Change of Battery SOC Jang, Byeong Gwan; Kim, Kyung-Soo; Choi, Hyo Seo; Kim, Wooyong, INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS, v.21, no.11, pp.3551 - 3562, 2023-11 |
| Consecutive adaptive Kriging method for high-dimensional reliability analysis based on multi-fidelity framework Park, Youngseo; Lee, Ikjin, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.67, no.1, 2024-01 |
| Conservative reliability-based design optimization method with insufficient input data Cho H.; Choi K.K.; Gaul N.J.; Lee, IkJin; Lamb D.; Gorsich D., STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.54, no.6, pp.1609 - 1630, 2016-12 |
| Conservative Surrogate Model Using Weighted Kriging Variance for Sampling-Based RBDO Zhao, Liang; Choi, K. K.; Lee, Ikjin; Gorsich, David, JOURNAL OF MECHANICAL DESIGN, v.135, no.9, 2013-09 |
| Consideration of geometric nonlinearity in rigid-plastic finite element formulation of continuum elements for large deformation Lee, DW; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.39, no.12, pp.1423 - 1440, 1997-12 |
| Consideration of strength differential effect in sheet metals with symmetric yield functions Lou, Yanshan; Huh, Hoon; Yoon, Jeong-Whan, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.66, pp.214 - 223, 2013-01 |
| Considerations in measuring cartilage thickness using MRI: factors influencing reproducibility and accuracy Koo, Seungbum; Gold, GE; Andriacchi, TP, OSTEOARTHRITIS AND CARTILAGE, v.13, no.9, pp.782 - 789, 2005-09 |
| Considering the Higher-Order Effect of Residual Modes in the Craig-Bampton Method Kim, Jaemin; Boo, Seung-Hwan; Lee, Phill-Seung, AIAA JOURNAL, v.56, no.1, pp.403 - 412, 2018-01 |
| Consistent multiple graph matching with multi-layer random walks synchronization Park, Han-Mu; Yoon, Kuk-Jin, PATTERN RECOGNITION LETTERS, v.127, pp.74 - 86, 2019-11 |
| Consistent thermal stress calculation by using a new approach of the enhanced assumed strain method Yeo, ST; Ko, JH; Lee, Byung Chai, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, v.188, no.1-3, pp.331 - 345, 2000 |
| Constrained motion planning for robot manipulators using local geometric information Wang, Jeonghyeon; Lee, Jujang; Kim, Jinwhan, ADVANCED ROBOTICS, v.29, no.24, pp.1611 - 1623, 2015-10 |
| CONSTRAINED OUTPUT-FEEDBACK CONTROL OF FLEXIBLE ROTOR BEARING SYSTEMS KIM, JS; Lee, Chong-Won, JOURNAL OF SOUND AND VIBRATION, v.138, no.1, pp.95 - 114, 1990-04 |
| Constrained variational approach for dynamic analysis of elastic contact problems Huh, Gyoung Jae; Kwak, Byung Man, FINITE ELEMENTS IN ANALYSIS AND DESIGN, v.10, no.0, pp.125 - 136, 1991-11 |
| CONSTRAINT FILTERED-X AND FILTERED-U LEAST-MEAN-SQUARE ALGORITHMS FOR THE ACTIVE CONTROL OF NOISE IN DUCTS KIM, IS; NA, HS; Kim, Kwang-joon; Park, Youngjin, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.95, no.6, pp.3379 - 3389, 1994-06 |
| Constraints and properties of linear heat transfer relations Song, Tae-Ho, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.30, no.3, pp.1377 - 1388, 2016-03 |
| Constraints from LIGO O3 Data on Gravitational-wave Emission Due to R-modes in the Glitching Pulsar PSR J0537-6910 Abbott, R; Noh, Minkyun, ASTROPHYSICAL JOURNAL, v.922, no.1, 2021-11 |
| Constraints on Cosmic Strings Using Data from the Third Advanced LIGO-Virgo Observing Run Abbott, R; Noh, Minkyun, PHYSICAL REVIEW LETTERS, v.126, no.24, 2021-06 |
| Construction of a computer-simulated mixed reality environment for virtual factory layout planning Lee, Jonghwan; Han, Soonhung; Yang, Jeongsam, COMPUTERS IN INDUSTRY, v.62, no.1, pp.86 - 98, 2011-01 |
| Construction of polyhedral finite element meshes based upon marching cube algorithm Kim, Sangjun; Sohn, Dongwoo; Im, Seyoung, ADVANCES IN ENGINEERING SOFTWARE, v.128, pp.98 - 112, 2019-02 |
| Construction of sliding constraint surfaces and initial guess shapes for intermediate steps in multi-step finite element inverse analysis Kim, SH; Huh, Hoon, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.130, no.SI, pp.482 - 489, 2002-12 |
| Construction of Small-Sized Electro-Dynamic Type Bending Fatigue Testing Machine j.h.song; y.s.shin; y.s.im, 대한기계학회논문집 A, v.13, no.1, pp.199 - 203, 1989 |
| Constructive and destructive interaction modes between two tandem flexible flags in viscous flow Kim, Sohae; Huang, Wei-Xi; Sung, Hyung Jin, JOURNAL OF FLUID MECHANICS, v.661, pp.511 - 521, 2010-10 |
| Constructive remodeling of a synthetic endothelial extracellular matrix Han, Sewoon; Shin, Yoojin; Jeong, Hyo Eun; Jeon, Jessie Sungyun; Kamm, Roger D.; Huh, Dongeun; Sohn, Lydia L.; et al, SCIENTIFIC REPORTS, v.5, 2015-12 |
| Contact Analysis by Shape Optimization (CASO) Kwak, Byung Man; Lee, C. W., MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, v.37, no.2, pp.113 - 142, 2009 |
| Contact analysis of mechanically fastened joints in composite laminates based upon layer-wise theory Lee, Byung Chai; Im, Seyoung, COMPUTER MODELING AND SIMULATION IN ENGINEERING, v.4, no.1, pp.19 - 28, 1999-01 |
| Contact analysis of mechanically fastened joints in composite laminates by linear complementarity problem formulation Ko, HY; Kwak, Byung Man, COMPOSITE STRUCTURES, v.40, no.3-4, pp.187 - 200, 1997-12 |
| Contact Analysis of Nonlinear Shell Structures Using a Mathematical Programming Method Lee, Gyu Bong; Kim, Young Gon; Kwak, Byung Man, KSME international journal, v.3, no.2, pp.130 - 138, 1989 |
| Contact angle and wettability of hybrid surface-treated metal adherends Kim, Jin-Gyu; Choi, Il-Beom; Lee, Dai-Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.27, no.7, pp.794 - 810, 2013-04 |
| Contact behavior of a fluttering flag with an adjacent plate Lee, Jeongsu; Kim, Daegyoum; Kim, Ho-Young, PHYSICS OF FLUIDS, v.33, no.3, 2021-03 |
| CONTACT CONTROL FOR ADVANCED APPLICATIONS OF LIGHT WEIGHT ARMS BOOK, WJ; Kwon, Dong-Soo, JOURNAL OF INTELLIGENT ROBOTIC SYSTEMS, v.6, no.1, pp.121 - 137, 1992-08 |
| CONTACT FORCE PREDICTION AND EXPERIMENTAL-VERIFICATION ON AN OHC FINGER-FOLLOWER-TYPE CAM-VALVE SYSTEM KIM, WJ; JEON, HS; Park, Youn-sik, EXPERIMENTAL MECHANICS, v.31, no.2, pp.150 - 156, 1991-06 |
| Contact Line Instability Caused by Air Rim Formation under Nonsplashing Droplets Pack, Min; Kaneelil, Paul; Kim, Hyoungsoo; Sun, Ying, LANGMUIR, v.34, no.17, pp.4962 - 4969, 2018-05 |
| Contact potential measurement using a heated atomic force microscope tip Remmert, Jessica L.; Wu, Yan; Lee, Jungchul; Shannon, Mark A.; King, William P., APPLIED PHYSICS LETTERS, v.91, no.14, 2007-10 |
| CONTACT PRESSURE AND CURRENT-DENSITY DISTRIBUTION IN A CIRCULAR CONTACT SURFACE PARK, SW; Na, Suck-Joo, IEEE TRANSACTIONS ON COMPONENTS HYBRIDS AND MANUFACTURING TECHNOLOGY, v.13, no.2, pp.320 - 325, 1990-06 |
| CONTACT STRESS MINIMIZATION BY CONTOUR DESIGN HAUG, EJ; Kwak, Byung Man, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, v.12, no.6, pp.917 - 930, 1978-08 |
| Contact time on curved superhydrophobic surfaces Han, Jeonghoon; Kim, Wonjung; Bae, Changwoo; Lee, Dongwook; Shin, Seungwon; Nam, Youngsuk; Lee, Choongyeop, PHYSICAL REVIEW E, v.101, no.4, 2020-04 |
| Contact-free thermal expansion measurement of very soft elastomers using digital image correlation Lee, Tae-Ik; Kim, Min Sung; Kim, Taek-Soo, POLYMER TESTING, v.51, pp.181 - 189, 2016-05 |
| Contactless magnetically levitated silicon wafer transport system Park, KH; Lee, SK; Yi, JH; Kim, Soohyun; Kwak, Yoon Keun; Wang, IA, MECHATRONICS, v.6, no.5, pp.591 - 610, 1996-08 |
| Content-oriented knowledge modeling for automated parts library ontology merging Cho, J.; Kim, H.; Han, Soonhung, COMPUTER SUPPORTED COOPERATIVE WORK IN DESIGN II Book Series: LECTURE NOTES IN COMPUTER SCIENCE, v.3865, pp.324 - 333, 2006 |
| Continous gain scheduling control for micro-positioning system: simple, robust snd no overshoot response Gweon, Dae-Gab; Kim, Yong Sang; Lee, Sung Q., CONTROL ENGINEERING PRACTICE, v.8, no.2, pp.133 - 138, 2000 |
| Continuous aerosol size separator using inertial microfluidics and its application to airborne bacteria and viruses Hong, Seung Chan; Kang, Joon Sang; Lee, Jung Eun; Kim, Sang-Soo; Jung, Jae Hee, LAB ON A CHIP, v.15, no.8, pp.1889 - 1897, 2015 |
| Continuous coaxial nozzle designs for improved powder focusing in direct laser metal deposition Gabor, Theodore; Yun, Huitaek; Akin, Semih; Kim, Kyung-Han; Park, Jong -Kwon; Jun, Martin Byung-Guk, JOURNAL OF MANUFACTURING PROCESSES, v.83, pp.116 - 128, 2022-11 |
| Continuous ECAP process design for manufacturing a microstructure-refined bolt Jin, Young-Gwan; Baek, Hyun-Moo; Im, Yong-Taek; Jeon, Byung-Cheol, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.530, pp.462 - 468, 2011-12 |
| Continuous high strength aluminum bolt manufacturing by the spring-loaded ECAP system Jin, Young-Gwan; Baek, Hyun-Moo; Hwang, Sun-Kwang; Im, Yong-Taek; Jeon, Byung-Cheol, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.212, no.4, pp.848 - 855, 2012-04 |
Discover
Open Access
Date issued
- 4,152 2020 - 2024
- 12,347 2010 - 2019
- 10,774 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989