Showing results 9361 to 9420 of 12362
Tomo-PIV measurement of flow around an arbitrarily moving body with surface reconstruction Im, Sunghyuk; Jeon, Young Jin; Sung, Hyung-Jin, EXPERIMENTS IN FLUIDS, v.56, no.2, 2015-02 |
Tomographic PIV measurements of flow patterns in a nasal cavity with geometry acquisition Im, Sunghyuk; Heo, Go Eun; Jeon, Young Jin; Sung, Hyung Jin; Kim, Sung Kyun, EXPERIMENTS IN FLUIDS, v.55, no.1, 2014-01 |
Toms 효과가 있는 저어널베어링에서의 k-ε 모델을 이용한 성능해석 이득우; 김경웅, 대한기계학회논문집 A, v.10, no.4, pp.487 - 493, 1986-07 |
Tool design in a multi-stage drawing and ironing process of a rectangular cup with a large aspect ratio using finite element analysis Kim, SH; Kim, SH; Huh, Hoon, INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE, v.42, no.7, pp.863 - 875, 2002-05 |
Tool life model for abrasive wet micro-drilling of ceramic green bodies Lee, HG; Lee, Dai Gil, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, v.44, no.7-8, pp.839 - 846, 2004-06 |
Tool life prediction for the bolt forming process based on high-cycle fatigue and wear Lee, HC; Lee, Y; Lee, SY; Choi, S; Lee, DL; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.201, no.1-3, pp.348 - 353, 2008-05 |
TOOL PATH DESIGN OF INCREMENTAL OPEN-DIE DISK FORGING USING PHYSICAL MODELING Lee, Sung-Uk; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, v.22, no.31-32, pp.5686 - 5691, 2008-12 |
Tool wear monitoring system for CNC end milling using a hybrid approach to cutting force regulation Lee, KJ; Lee, TM; Yang, Min-Yang, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.32, no.1-2, pp.8 - 17, 2007-02 |
Toolpath planning algorithm for the ablation process using energy sources Kim, HC; Lee, SH; Yang, Dong-Yol, COMPUTER-AIDED DESIGN, v.41, no.1, pp.59 - 64, 2009-01 |
Top-down fabricated silicon nanowire sensors for real-time chemical detection Park, Inkyu; Li, Zhiyong; Pisano, Albert P.; Williams, R. Stanley, NANOTECHNOLOGY, v.21, no.1, 2010-01 |
Top-Feed Type 인젝터의 액상 분사 LPG 연료 분사 장치 적용 염기태; 박정서; 배충식; 박정남; 김성근, 한국자동차공학회 논문집, v.15, no.6, pp.30 - 37, 2007-11 |
Top-Feed Type 인젝터의 액상분사 LPG연료 분사장치 적용 염, 기태; 박, 정서; 배, 충식; 박, 정남; 김, 성근; Yeom, Kitae; Park, Jungseo; et al, Transactions of KSAE, Vol.15, No.6, pp.30-37, 2007-11 |
Topographic SLAM Using a Single Terrain Altimeter in GNSS-Restricted Environment Jang, Junwoo; Kim, Jinwhan, IEEE ACCESS, v.10, pp.10806 - 10815, 2022-01 |
Topography imaging with a heated atomic force microscope cantilever in tapping mode Park, Keunhan; Lee, Jungchul; Zhang, Zhuomin M.; King, William P., REVIEW OF SCIENTIFIC INSTRUMENTS, v.78, no.4, 2007-04 |
Topological interface states in deep-subwavelength phononic beams Park, Seongmin; Jeon, Wonju, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, v.197, 2023-08 |
Topology optimization based on spline-based meshfree method using topological derivatives Hur, Junyoung; Kang, Pilseong; Youn, Sung-Kie, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.31, no.5, pp.2423 - 2431, 2017-05 |
Topology optimization for a frequency response and its application to a violin bridge Yu, Yonggyun; Jang, In Gwun; Kwak, Byung Man, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.48, no.3, pp.627 - 636, 2013-09 |
Topology optimization for a knuckle using design space adjustment and refinement Jang, IG; Yu, YG; Kwak, Byung Man, 대한기계학회논문집 A, v.30, no.5, pp.595 - 601, 2006 |
Topology Optimization of a HDD Actuator Arm 장수영; 조지현; 윤성기; 김철순; 오동호, COMPUTATIONAL STRUCTURAL ENGINEERING, v.1, no.2, pp.89 - 96, 2001 |
Topology optimization of a heat sink with an axially uniform cross-section cooled by forced convection Lee, Gilho; Lee, Ikjin; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.168, pp.120732, 2021-04 |
Topology optimization of deformable bodies with dissimilar interfaces Jeong, Gil-Eon; Youn, Sung-Kie; Park, K. C., COMPUTERS & STRUCTURES, v.198, pp.1 - +, 2018-03 |
Topology optimization of heat sinks in natural convection considering the effect of shape-dependent heat transfer coefficient Joo, Younghwan; Lee, Ik Jin; Kim, Sung-Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.109, pp.123 - 133, 2017-06 |
Topology optimization of inner-wall stiffener for critical buckling loads of cylindrical containers Seo, Yu Deok; Youn, Sung-Kie; Yeon, JeoungHeum; Chang, SuYoung; Yoo, Joon Tae, COLLECT. TECH. PAP. AIAA ISSMO MULTIDISCIP. ANAL. OPTIM. CONF., v.2, no.3, pp.1322 - 1330, 2004 |
Topology optimization of periodic microstructures for prescribed relaxation moduli of viscoelastic composites Yun, Kyeong-Soo; Youn, Sung-Kie, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, v.257, 2022-12 |
Topology optimization of rubber isolators considering static and dynamic behaviours Lee, WS; Youn, Sung-Kie, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.27, no.4, pp.284 - 294, 2004-06 |
Topology optimization of shell structures using adaptive inner-front (AIF) level set method Park, KS; Youn, Sung-Kie, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.36, pp.43 - 58, 2008-07 |
Topology optimization of the primary mirror of a multi-spectral camera Park, KS; Chang, SY; Youn, Sung-Kie, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.25, no.1, pp.46 - 53, 2003-03 |
Topology optimization of viscoelastic damping layers for attenuating transient response of shell structures Yun, Kyeong-Soo; Youn, Sung-Kie, FINITE ELEMENTS IN ANALYSIS AND DESIGN, v.141, pp.154 - 165, 2018-03 |
Torque capacity of co-cured tubular lap joints Choi, JH; Lee, Dai Gil, JOURNAL OF COMPOSITE MATERIALS, v.31, no.14, pp.1381 - 1396, 1997 |
Torque distribution using a weighted pseudoinverse in a redundantly actuated mechanism Park, DI; Lee, SH; Kim, Soohyun; Kwak, YK, ADVANCED ROBOTICS, v.17, no.8, pp.807 - 820, 2003 |
Torque Mode Control of a Cable-Driven Actuating System by Sensor Fusion Kong, Kyoungchul; Bae, Joonbum; Tomizuka, Masayoshi, JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, v.135, no.3, 2013-05 |
Torque Observer-based Control of Self-energizing Clutch Actuator for Dual Clutch Transmission Oh, Jiwon J.; Go, Jeong Soo; Choi, Seibum B, IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, v.25, no.5, pp.1856 - 1864, 2017-09 |
TORQUE TRANSMISSION CAPABILITIES OF ADHESIVELY BONDED TUBULAR LAP JOINTS FOR COMPOSITE DRIVE SHAFTS Kim, WT; Lee, Dai Gil, COMPOSITE STRUCTURES, v.30, no.2, pp.229 - 240, 1995 |
TORQUE TRANSMISSION CAPABILITIES OF BONDED POLYGONAL LAP JOINTS FOR CARBON-FIBER EPOXY COMPOSITES CHOI, JK; Lee, Dai Gil, JOURNAL OF ADHESION, v.48, no.1-4, pp.235 - 250, 1995 |
Torque transmission capability of composite-metal interference fit joints Lee, SW; Lee, Dai Gil, COMPOSITE STRUCTURES, v.78, no.4, pp.584 - 595, 2007-06 |
Torque Vectoring Algorithm of Electronic-Four-Wheel Drive Vehicles for Enhancement of Cornering Performance Park, Giseo; Han, Kyoungseok; Nam, Kanghyun; Kim, Heeseong; Choi, Seibum B., IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, v.69, no.4, pp.3668 - 3679, 2020-04 |
Torsional fatigue characteristics of aluminum-composite co-cured shafts with axial compressive preload Lee, Dai Gil; Kim, JW; Hwang, HY, JOURNAL OF COMPOSITE MATERIALS, v.38, no.9, pp.737 - 756, 2004 |
TOUGHENING OF CERAMICS THROUGH ALUMINA-BASED CEMENTED OXIDE Yang, Min-Yang; KOHLER, SP; KRAMER, BM, ADVANCED CERAMIC MATERIALS, v.3, no.4, pp.341 - 344, 1988-07 |
Toward Attogram Mass Measurements in Solution with Suspended Nanochannel Resonators Lee, Jungchul; Shen, Wenjiang; Payer, Kris; Burg, Thomas P.; Manalis, Scott R., NANO LETTERS, v.10, no.7, pp.2537 - 2542, 2010-07 |
Toward Modular Analysis of Supramolecular Protein Assemblies Kim, Jaehoon; Kim, Jin-Gyun; Yun, Giseok; Lee, Phill-Seung; Kim, Do-Nyun, JOURNAL OF CHEMICAL THEORY AND COMPUTATION, v.11, no.9, pp.4260 - 4272, 2015-09 |
Toward single-cycle laser systems Schibli TR; Kuzucu O; Kim, Jungwon; Ippen EP; Fujimoto JG; Kaertner FX; Scheuer V; et al, IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS, v.9, no.4, pp.990 - 1001, 2003 |
Towards high performance of supercapacitor: New approach to design 3 D architectured electrodes with bacteria Lee, Kwang Se; Kim, Sang Jun; Park, Chan Woo; Cho, Incheol; Kim, Patrick Joo Hyun; Pol, Vilas G.; Park, Inkyu; et al, JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, v.78, pp.232 - 238, 2019-10 |
Towards highly specific measurement of binary mixtures by tandem operation of nanomechanical sensing system and micro-Raman spectroscopy Ko, Juhee; Lee, Bong Jae; Lee, Jungchul, SENSORS AND ACTUATORS B-CHEMICAL, v.367, 2022-09 |
Towards hydro-elastoplastic analysis of floating plate structures Yoon, Joo Seong; Lee, Phill-Seung, JOURNAL OF FLUIDS AND STRUCTURES, v.71, pp.164 - 182, 2017-05 |
Towards improving the 2D-MITC4 element for analysis of plane stress and strain problems Choi, Hyung-Gyu; Lee, Phill-Seung, COMPUTERS & STRUCTURES, v.275, 2023-01 |
Towards improving the computational efficiency of the phase field model Kim, Gihwan; Lee, Phill-Seung, COMPUTERS & STRUCTURES, v.277-278, 2023-03 |
Towards improving the enhanced Craig-Bampton method Boo, Seung-Hwan; Kim, Jeong-Ho; Lee, Phill-Seung, COMPUTERS & STRUCTURES, v.196, pp.63 - 75, 2018-02 |
Towards improving the MITC9 shell element Bathe, KJ; Lee, PhillSeung; Hiller, JF, COMPUTERS STRUCTURES, v.81, no.8-11, pp.477 - 489, 2003-05 |
Towards jitter-free ultrafast electron diffraction technology Kim, Hyun Woo; Vinokurov, Nikolay A.; Baek, In Hyung; Oang, Key Young; Kim, Mi Hye; Kim, Young Chan; Jang, Kyu-Ha; et al, NATURE PHOTONICS, v.14, no.4, pp.245 - 249, 2020-04 |
Towards Shape-Changing Devices: Physical Interface Control with an Active Contour Model![]() Han, Byungkil; Kim, Seung-Chan; Kwon, Dong-Soo, SYMMETRY-BASEL, v.10, no.3, 2018-03 |
Towards Sub-Microscale Liquid Metal Patterns: Cascade Phase Change Mediated Pick-n-Place Transfer of Liquid Metals Printed and Stretched over a Flexible Substrate Kim, Doyoon; Yoon, Young; Kauh, Sang Ken; Lee, Jungchul, ADVANCED FUNCTIONAL MATERIALS, v.28, no.28, 2018-07 |
Towards the silicon nanowire-based sensor for intracellular biochemical detection Park, Inkyu; Li, Zhiyong; Li, Xuema; Pisano, Albert P.; Williams, R. Stanley, BIOSENSORS & BIOELECTRONICS, v.22, no.9-10, pp.2065 - 2070, 2007-04 |
Tracking adiponectin biodistribution via fluorescence molecular tomography indicates increased vascular permeability after streptozotocin-induced diabetes. Yoon, Nanyoung; Dadson, Keith; Dang, Thanh; Chu, Teresa; Noskovicova, Nina; Hinz, Boris; Raignault, Adeline; et al, AMERICAN JOURNAL OF PHYSIOLOGY-ENDOCRINOLOGY AND METABOLISM, v.317, no.5, pp.E760 - E772, 2019-11 |
Tracking Control Based on Model Predictive Control Using Laguerre Functions With Pole Optimization Jeong, Dasol; Choi, Seibum B., IEEE TRANSACTIONS ON INTELLIGENT TRANSPORTATION SYSTEMS, v.23, no.11, pp.20652 - 20663, 2022-11 |
Tracking control in x-y plane of an offshore container crane Kim, Dong Ho; Park, Young-Jin, JOURNAL OF VIBRATION AND CONTROL, v.23, no.3, pp.469 - 483, 2017-02 |
Tracking control of a two-wheeled mobile robot using input-output linearization Kim, DH; Oh, Jun-Ho, CONTROL ENGINEERING PRACTICE, v.7, no.3, pp.369 - 373, 1999-03 |
Tracking control of piezoelectric actuators Jung, H; Shim, JY; Gweon, Dae-Gab, NANOTECHNOLOGY, v.12, no.1, pp.14 - 20, 2001-03 |
Traction Microscopy Integrated with Microfluidics for Chemotactic Collective Migration Jang, Hwanseok; Kim, Jongseong; Shin, Jennifer Hyunjong; Fredberg, Jeffrey J.; Park, Chan Young; Park, Yongdoo, JOVE-JOURNAL OF VISUALIZED EXPERIMENTS, no.152, 2019-10 |
Traction microscopy with integrated microfluidics: responses of the multi-cellular island to gradients of HGF Jang, Hwanseok; Kim, Jongseong; Shin, Jennifer H.; Fredberg, Jeffrey J.; Park, Chan Young; Park, Yongdoo, LAB ON A CHIP, v.19, no.9, pp.1579 - 1588, 2019-05 |
Training Strategy and sEMG Sensor Positioning for Finger Force Estimation at Various Elbow Angles Cho, Minsu; Cho, Younggeol; Kim, Kyung-Soo, INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS, v.20, no.5, pp.1621 - 1631, 2022-05 |
Discover