588 | F.M.S. 에 적응할 수 있는 치구작업 자동화에 관한 연구 = A study on the automatic positioning and clamping operation of the systemized jig-and-fixtures for F.M.S.link 한건수; Han, Keon-Soo; et al, 한국과학기술원, 1986 |
589 | Fabrication and characterization of suspended microchannel dispensers with an integrated heater for high resolution patterning = 고해상도 패터닝의 응용을 위한 가열 소자 통합 마이크로 채널 디스펜서의 제작과 특성 분석link Ko, Juhee; Lee, Jungchul; et al, 한국과학기술원, 2021 |
590 | Fabrication and experimental study of a polymer-based pulsating heat pipe with metallic packaging = 금속 패키징이 적용된 폴리머 기반 진동형 히트파이프의 제작 및 실험적 연구link Jung, Chuljae; Kim, Sung Jin; et al, 한국과학기술원, 2019 |
591 | Fabrication of metallic tube resonators and their applications on water boiling transition measurements = 금속 튜브 공진센서의 제작과 이를 이용한 물의 비등점 측정link Son, SukBom; Lee, Jungchul; et al, 한국과학기술원, 2022 |
592 | Fabrication of thermopneumatic PDMS membrane actuator for generating touch and application to braille code display device = 접촉을 유발하는 열유압 PDMS 박막 구동기 제작 및 점자 출력 장치로의 응용link Kwon, Hyuk-Jun; 권혁준; et al, 한국과학기술원, 2009 |
593 | Fabrication of thin and flexible supercapacitors using laser annealing process = 레이저 경화 공정을 이용한 유연 박막형 슈퍼캐패시터 제작link Kim, Geonwoong; 김건웅; et al, 한국과학기술원, 2013 |
594 | Fatigue behavior of semi-transparent silver-nanowire healable conductor and fabrication of healable touch panel = 은 나노 와이어 힐러블 전도체의 피로거동 분석 및 힐러블 터치 패널 제작link Bae, Jong Soo; 배종수; et al, 한국과학기술원, 2015 |
595 | FCA 필릿 pipe 용접에서 비선형 근사와 시각센서를 이용한 비드 형상 모니터링에 대한 연구 = A study on bead shape monitoring by using vision sensor and non linear multiple regression in fillet pipe with FCAWlink 조대원; Cho, Dae-Won; et al, 한국과학기술원, 2009 |
596 | FCA용접용 아크센서의 개발 및 이를 이용한 로보트 용접에 관한 연구 = A study on the development of arc sensor for FCAW process and its application for robotic arc weldinglink 김수영; Kim, Soo-Young; et al, 한국과학기술원, 1992 |
597 | FDM을 이용한 레이저 절단공정에서의 절단 메카니즘 및 열전달에 관한 연구 = A study on cutting mechanism and heat transfer in laser cutting process using FDMlink 박준홍; Park, Jun-Hong; et al, 한국과학기술원, 1993 |
598 | Feature-based camera tracking for 3D-to-2D image registration for image-guided endoscopic retrograde cholangiopancreatography = 영상 유도를 적용한 내시경적 역행성 담췌관 조영술을 위한 영상정합 및 내시경 카메라 추종 방법link Thinh Tien Nguyen Nguyen; Nguyen; et al, 한국과학기술원, 2013 |
599 | Feedback linearization of ABS with time delay input using adaptive sliding mode control = 적응 슬라이딩 모드 제어를 이용한 시간지연이 있는 ABS의 궤환 선형화 기법link Park, Kyun-Sang; 박균상; et al, 한국과학기술원, 2008 |
600 | Feedforward 방법을 이용한 BLDC 모터의 토크리플 보상 = The compensation of torque ripple of brushless DC motor using feedforward methodlink 장호연; Jang, Ho-Youn; 권대갑; 장평훈; et al, 한국과학기술원, 1997 |
601 | Femtosecond laser-induced graphene-based green wood gas sensor = 펨토초 레이저-유도 그래핀 기반 친환경 목재 가스 센서link Kim, Cheolmin; 김철민; et al, 한국과학기술원, 2024 |
602 | FFT 기법을 이용한 관내 음향 특성치 결정 = Determination of acoustic properties in an impedance tube by FFT techniquelink 박찬석; Park, Chan-Surk; et al, 한국과학기술원, 1989 |
603 | Fiber suspension flow and homogenization of elastic properties under uncertainty = 불확실성 하에서의 섬유 현탁액의 유동과 탄성 성질의 균질화에 대한 연구link Sterr, Benedikt Ferdinand; Kim, Daegyoum; et al, 한국과학기술원, 2021 |
604 | Fiber 레이저를 이용한 폴리머의 투과 접합에 관한 연구 = A study on transmission welding of polymers using fiber laserlink 이동식; Lee, Dong-Sic; et al, 한국과학기술원, 2007 |
605 | Filtered-x LMS 알고리즘을 응용한 덕트내 전파 소음의 능동 제어 = Active noise control in a duct using filtered -x LMS algorithmlink 우재학; Woo, Jae-Hak; et al, 한국과학기술원, 1992 |
606 | Finite analytic method 를 이용한 수직 분포 하중을 받는 보와 탄성 평판의 해석 = Application of finite analytic method to the laterally loaded beam and thin elastic platelink 조영호; Cho, Young-Ho; et al, 한국과학기술원, 1982 |
607 | Finite collision model for the double support phase of human walking = 인체 보행 시 양발지지단계에 대한 유한 충돌 모델link Yeom, Jin; 염진; et al, 한국과학기술원, 2010 |
608 | Finite element analysis for large axisymmetric deformations of plastic and viscoplastic materials with plastic spin = 소성스핀을 수반하는 소성 및 점소성 재료의 축대칭 대변형에 관한 유한요소 해석link Kim, Young; 김용; et al, 한국과학기술원, 1991 |
609 | Finite element analysis of 3D printed structures using homogenization and model reduction method = 균질화 기법과 모델 축소 기법을 이용한 3D 프린팅 구조물 유한요소해석link Yoon, DaeHyun; Lee, Phill-Seung; et al, 한국과학기술원, 2022 |
610 | Finite element analysis of heat and fluid flow in a glass melter = 유리 용해로내 열유동의 유한 요소법 해석link Won, Yoo-Cheol; 원유철; et al, 한국과학기술원, 1994 |
611 | Finite element investigation of instability in hot bar rolling process = 열간 선재 압연공정의 유동불안정에 대한 유한요소 해석link Awais, Muhammad; 아와이스, 모하메드; et al, 한국과학기술원, 2006 |
612 | Finite element stress analysis of implanted total hip prostheses with various thickness of cement = 유한요소법을 이용한 세멘트 두께에 따른 인공 고관절의 응력 해석link Lim, O-Kaung; 임오강; et al, 한국과학기술원, 1978 |
613 | Fivebar 병렬 구조를 이용한 6자유도 힘 반사형 원격 조종기 = A 6-degree-of-freedom force-reflecting hand controller using fivebar parallel mechanismlink 진병대; Jin, Byoung-Dae; et al, 한국과학기술원, 1997 |
614 | Flexibility가 있는 구동부에서의 서보제어에 관한 연구 = A study on the servo control of systems with flexibilitylink 김주민; Kim, Joo-Min; et al, 한국과학기술원, 2005 |
615 | Flexural vibration damping in beams using acoustic black hole effect = 음향블랙홀 효과를 이용한 보의 굽힘진동 감쇠link Bojja, Navya; Kim, Kwang-Joon; et al, 한국과학기술원, 2017 |
616 | Flow and heat transfer characteristics in a rotating disk chemical vapor deposition = 박막 증착기 내부에서의 유동 및 열전달 특성link Lim, Jong-Mook; 임종묵; et al, 한국과학기술원, 1989 |
617 | Flow driven by a shrouded spinning disk with axial suction and radial inflow = 축방향 흡출과 반경방향 흡입이 있는 원통내의 회전 유동에 관한 연구link Kim, Jae-Won; 김재원; et al, 한국과학기술원, 1987 |
618 | Flow of a double-diffusive stratified fluid in a differentially-rotating cylinder = 회전하고 있는 원통내에서의 이중확산 성층화 유체의 유동link Kwak, Ho-Sang; 곽호상; et al, 한국과학기술원, 1988 |
619 | Flow structure and heat transfer of a sweeping jet impinging on a flat wall = 평판에 충돌하는 스위핑 제트의 유동구조와 열전달 특성link Park, Tongil; Kim, Daegyoum; et al, 한국과학기술원, 2018 |
620 | Flow-induced vibration of cylindrical pendulums = 원주형 진자 모델의 유동 유발 진동link Kim, Junyoung; Kim, Daegyoum; et al, 한국과학기술원, 2017 |
621 | Fluid and particle transport near a hairy structure = 강모 구조체 외부의 유체 및 입자 이동link Lee, Hongki; Kim, Daegyoum; et al, 한국과학기술원, 2018 |
622 | Forced convection heat transfer in the microchannel heat sink for electronic equipment cooling = 전자 제품 냉각용 마이크로채널 히트싱크 내의 강제대류 열전달link Kim, Duck-Jong; 김덕종; et al, 한국과학기술원, 1999 |
623 | Formation control of multiple autonomous mobile robots with inaccurate sensor information = 부정확한 센서 정보를 이용한 다 개체 이동 로봇의 대형 형성 방법론link Kim, Gun-Hee; 김건희; et al, 한국과학기술원, 2001 |
624 | Fortifying performance of soft actuator using hetero-space charge characteristics of PVC-gel & dielectric liquid = PVC-gel의 이형 공간 전하 특성과 유전 유체를 이용한 고출력 유연 구동기 설계link Kim, HyunWoo; Kyung, Ki-Uk; et al, 한국과학기술원, 2020 |
625 | Four-equation turbulence model for prediction of 2-dimensional unsteady thermal discharge into a reservoir = 온수의 표면 방출에 의한 2차원 비정상 난류 열확산 예측을 위한 4-방정식 모델link Park, Sang-Woo; 박상우; et al, 한국과학기술원, 1983 |
626 | Fracture strength evaluation of ultra-thin glass by ball-on-ring test considering kinematic nonlinearity = 기구학적 비선형성을 고려한 Ball-on-Ring 시험에 의한 초박형 유리의 파괴 강도 평가link Lee, Sun-Woo; Kim, Taek-Soo; et al, 한국과학기술원, 2023 |
627 | Fracture toughness of defective welded joints and acoustic emission = 결함있는 용접부위의 파괴인성치와 Acoustic emissionlink Song, Sung-Jin; 송성진; et al, 한국과학기술원, 1983 |
628 | Frame analysis structural design system = 콤퓨터를 이용한 구조해석 및 설계link O, Hung-Kuk; 오흥국; et al, 한국과학기술원, 1976 |
629 | Friction-model-based estimation of interaction force between tissues and a surgical robot instrument = 수술용 로봇의 기구와 생체조직 간 상호작용 힘의 마찰 모델 기반 추정 방법link Kim, Subon; 김수본; et al, 한국과학기술원, 2015 |
630 | Fuel economy improvement of a downsized engine through the reduction of knocking in transient conditions = 과도응답 조건에서의 노킹 저감을 통한 다운사이징 엔진의 연비 개선link Shin, Ji Yong; Bae, Choong Sik; et al, 한국과학기술원, 2017 |
631 | Functional fabric heater based on silver nanowire/carbon nanotube composites = 은 나노와이어와 탄소 나노튜브 복합체 기반의 기능성 직물 히터link Ahn, Junseong; Park, In Kyu; et al, 한국과학기술원, 2019 |
632 | Fundamental research on discharge characteristics and reaction kinetics of corona ignition = 코로나점화장치의 방전특성과 반응역학에 관한 연구link Kim, Wooyeong; 김우영; Bae, Choongsik; et al, 한국과학기술원, 2016 |
633 | Fuzzy 논리 제어기를 이용한 저항 점 용접 공정의 제어 = Design of a fuzzy logic controller for resistance spot welding processlink 최성국; Choi, Sung-Kuk; et al, 한국과학기술원, 1990 |
634 | Gas metal arc welding 의 자동화를 위한 최적 용접 조건에 관한 연구 = A study on optimal welding parameters for the automation of gas metal arc weldinglink 이종희; Lee, Jong-Hee; et al, 한국과학기술원, 1986 |
635 | Generation of subject-specific motions at various walking speeds using meta reinforcement learning and generative adversarial networks = 메타 강화학습과 생성적 적대 신경망을 이용한 특정인의 다양한 속도 보행 동작 생성link Jung, Mingi; Koo, Seungbum; et al, 한국과학기술원, 2022 |
636 | Geometrical adaptive control of machining straightness in end milling = 엔드 밀링 작업에서의 진직도 개선을 위한 기하학적 적응 제어link Kim, Jong-Sun; 김종선; et al, 한국과학기술원, 1985 |
637 | Geometry independent planar manipulation by multiple cooperating mobile robots = 군집협업로봇에 의한 기하 독립체의 평면이동link Sankar, Hari; Kim, Soo-hyun; et al, 한국과학기술원, 2009 |
638 | GERT 를 이용한 재공품 관리 = Work-in-process control using GERTlink 신현기; Shin, Hyun-Ki; et al, 한국과학기술원, 1980 |
639 | GHP 실외기 설계 인자에 따른 3차원 내부 유동 특성 고찰 = Analysis of three-dimensional flow about the outdoor unit of a gas-engine driven heat pump systemlink 정유라; Chung, Yu-La; et al, 한국과학기술원, 2004 |
640 | GMA 용접공정의 용접선 추적에 대한 아크빛의 적용 = Application of light emission to seam tracking in GMAW processlink 이현수; Lee, Hyun-Soo; et al, 한국과학기술원, 1994 |
641 | GMA 용접에서 단락이행 모드의 품질평가 방법에 관한 연구 = Study on weld quality assessment method of short-circuit Gas Metal Arc weldinglink 김재민; Kim, Jae-Min; 나석주; 유중돈; et al, 한국과학기술원, 2001 |
642 | GMA 용접용 토치의 형상에 따른 분위기 가스조성과 용접 품질에 미치는 영향 = Effects of GMAW torch configurations on shielding gas composition and weld quality GMAlink 문명철; Moon, Myung-Chul; et al, 한국과학기술원, 1999 |
643 | GMAW 공정에서 아크 안정성의 실시간 측정 = Real-time estimation of arc stability in gas metal arc welding processeslink 강성택; Kang, Sung-Taek; et al, 한국과학기술원, 1989 |
644 | GMAW 공정에서의 용접선 자동추적에 관한 연구 = A study on the seam tracking of the GMAW processlink 최한호; Choi, Han-Ho; et al, 한국과학기술원, 1990 |
645 | GMAW 공정의 아크 길이 변화에 따른 아크 빛에 관한 연구 = A study on arc light intensity due to arc length change in GMAWlink 유용상; Yoo, Yong-Sang; et al, 한국과학기술원, 1996 |
646 | GMAW 용접공정에서 온도분포의 동적 거동에 관한 연구 = An analysis of temperature distribution in GMAW welding processlink 이재우; Lee, Jae-Woo; et al, 한국과학기술원, 1988 |
647 | GMT 평판의 bolted joint 강도에 관한 연구 = A study on bolted joint strength of GMT platelink 강완석; Kang, Wan-Seok; et al, 한국과학기술원, 2002 |