4 | A study on the development of an efficient reliability analysis method using design of experiment augmented by the response surface method 곽병만, 1st KAIST-Tokyo Tech Joint Workshop of Fracture, Reliability and advanced Materials, 2004 |
5 | Analysis and Determination of Optimal Prosthesis for Total Hip Replacement Arthroplasty 곽병만, 대한의사협회지, v.23, no.9, pp.775 - 783, 1980-08 |
6 | B-spline을 이용한 선체 곡면의 형성 = Ship hull surface generation using B-splineslink 김순찬; Kim, Soon-Chan; et al, 한국과학기술원, 1985 |
7 | Balance maintaining equipment for floating body 곽병만, 2014-02-19 |
8 | Bone plate 의 해석및 설계 = Analysis and design of bone-plate-screw systemlink 김성수; Kim, Sung-Soo; et al, 한국과학기술원, 1980 |
9 | Clustering algorithms for order picking in automated warehousing systems = 자동창고 시스템에서의 물품불출을 위한 클러스터링 알고리듬link Baek, Won-Jang; 백원장; Hwang, Hark; Kwak, Byung-Man; et al, 한국과학기술원, 1986 |
10 | Conceptual design of Mobile Harbor based on topology optimization Jang, In Gwun; 곽병만, 7th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, 2012-06-18 |
11 | Contact analysis of beam and shell structures with geometric and material nonlinearities = 재료 및 기하학적 비선형성을 갖는 보 및 쉘 구조물의 접촉 해석link Lee, Gyu-Bong; 이규봉; et al, 한국과학기술원, 1989 |
12 | Contact force analysis for the cylindrical roller bearing = 원통형 로울러 베어링의 접촉력 해석link Lee, Gun-Myung; 이건명; et al, 한국과학기술원, 1980 |
13 | Contact stress analysis and contact surface design of multibody elastic system an application to spot welder electrode design = 다(多) 룰체탄성계에서의 접촉응력해석과 접촉면의 설계 ---Spot Welder 응접봉에의 응용link Yoo, Wan-Suk; 유완석; et al, 한국과학기술원, 1978 |
14 | Contact stress analysis including plastic deformation for a finite beam on an elastic foundation = 탄성 기초위의 유한 보에 대한 소성변형을 포함한 접촉 응력 해석link Lee, Gyu-Bong; 이규봉; et al, 한국과학기술원, 1980 |
15 | Crane Spreader and Method for Automatically Landing The Same 김수현; 김은호; 장인권; 정윤섭; 이일석; 김상만; 주한종; et al, 2013-03-13 |
16 | Design space optimization using a numerical design continuation method = 설계연속화 방법을 사용한 설계공간 최적화link Kim, Il-Yong; 김일용; et al, 한국과학기술원, 2002 |
17 | Determination of residual stress distribution in ion-nutrided steel = 이온 질화 처리 강에서의 잔류 응력 분포 결정link Gil, Young-Jun; 길영준; et al, 한국과학기술원, 1981 |
18 | Development of a knowledge based program to design epicyclic gear trains = 유성 치차 장치의 설계를 위한 지식 기반 프로그램의 개발link Kim, Jae-Uk; 김재욱; et al, 한국과학기술원, 1990 |
19 | Dynamic analysis of slider crank mechanism by finite element method = 유한요소법을 이용한 Slider crank mechanism 의 동적해석link Ryou, Sung-Ryul; 류성렬; et al, 한국과학기술원, 1978 |
20 | Finite analytic method 를 이용한 수직 분포 하중을 받는 보와 탄성 평판의 해석 = Application of finite analytic method to the laterally loaded beam and thin elastic platelink 조영호; Cho, Young-Ho; et al, 한국과학기술원, 1982 |
21 | Finite Difference Analysis of Low Velocity impact on an Ellipsoidal Shell by an Elastic Ball 곽병만, Proc. KSME Spring Annual Meeting, pp.233 - 236, 1993 |
22 | Finite element stress analysis of implanted total hip prostheses with various thickness of cement = 유한요소법을 이용한 세멘트 두께에 따른 인공 고관절의 응력 해석link Lim, O-Kaung; 임오강; et al, 한국과학기술원, 1978 |
23 | Isogeometric Analysis Based on Boundary Element Method = 경계요소법 기반 등기하해석법link Choi, Geol; 최걸; et al, 한국과학기술원, 2010 |
24 | J-integral 을 이용한 저 탄소 강의 파괴 인성치 결정 = Fracture toughness of low-carbon steel using J-integral principlelink 안득만; An, Deuk-Man; et al, 한국과학기술원, 1979 |
25 | J-적분을 이용한 저탄소강의 파괴 과성치 결정 안득만; 곽병만, 대한기계학회논문집, v.3, no.4, pp.133 - 142, 1979 |
26 | MATLAB을 이용한 신뢰도 기반 설계 시스템 개발 곽병만, 대한기계학회 2007 춘계학술대회, pp.46 -, 2007 |
27 | MEMS 장치에의 적용을 위한 복합장해석코드(CA/MEMS) 및 통합설계도구(DS/MEMS) 개발 윤성기; 곽병만; 권장혁; 장수영; 허재성; 김유진; 김봉규; et al, 제 1회 CAE 응용기술 컨퍼런스, 2003-02 |
28 | Monte Carlo Simulation과 다구찌 방법을 이용한 치차의 공차할당 = Tolerance allocation of gears using Monte Carlo Simulation and taguchi methodlink 신동길; Shin, Dong-Gil; et al, 한국과학기술원, 1994 |
29 | Multi-scale FEM coupled with X-FEM for optimization in microstructure = X-FEM을 이용한 멀티스케일 해석 및 마이크로구조 최적설계에의 응용link Liu, Chenxin; 류천신; et al, 한국과학기술원, 2007 |
30 | New developments in Optimal Design Formulations and Theories: Evolutionary Topology Optimization and Robust Design by Allowable Set 곽병만, KSME 2005 Fall Annual Meeting-60th Anniversary: Plenary Lecture, pp.2726 - 2783, 2005 |
31 | Numerical Implementation of Three-Dimensional Frictional Contact by a Linear Complementarity Problem 곽병만, KSME international journal, v.4, no.1, pp.23 - 31, 1990-08 |
32 | Optimal design of damped structures under dynamic loads = 외력 또는 외부변위 조건하의 동적 구조물의 최적 설계 방법link Kim, Seung-Woo; 김승우; et al, 한국과학기술원, 1980 |
33 | Optimal design of laminated composite plates under in-plane loads = 평면 하중을 받는 복합적층판의 최적 설계link Lee, Ho-Seop; 이호섭; Hong, Chang-Sun; Kwak, Byung-Man; et al, 한국과학기술원, 1986 |
34 | Optimal design program for truss and beam structure using a generalized steepest descent method = 일반화된 Steepest descent 방법을 이용한 트러스와 보로 이루어진 구조물의 최적설계 프로그램 개발link Lee, Byung-Chai; 이병채; et al, 한국과학기술원, 1979 |
35 | Optimization of dynamic response of a vehicular system under variable environmental conditions = 여러 한계하에서 차량 시스템의 동적 응답에 대한 최적 설계link Huh, Gyoung-Jae; 허경재; et al, 한국과학기술원, 1979 |
36 | PZT 순수박막과 PZT/PT 교차박막의 적외선 감지 특성 비교 고종수; 곽병만, 대한기계학회논문집 A, v.26, no.6, pp.1001 - 1007, 2002 |
37 | Quadtree 기법을 이용한 2차원 자동격자 구성 프로그램의 개발 = Automatic two-dimensional mesh generation using quadtree methodlink 이주식; Lee, Ju-Sik; 곽병만; 윤용산; et al, 한국과학기술원, 1988 |
38 | Report of Salvage Procedures in Failed Total Hip Replacement 김영용; 배대경; 안제환; 박동욱; 최경열; 김영권; 곽병만; et al, 대한정형외과학회지, v.15, no.2, pp.380 - 387, 1980 |
39 | Ritz Method 를 이용한 접착 구조물 해석 = Stress analysis of a bonded structural system by the ritz methodlink 강구태; Kang, Goo-Tae; 곽병만; 김영룡; et al, 한국과학기술원, 1984 |
40 | Robust design of structural and mechanical systems using concept of allowable load set 곽병만, Computational Structural Engineering Institute of Korea (한국전산구조학회), pp.333 - 338, 2007 |
41 | RS-based statistical moment and reliability estimation method and its application to robust design 곽병만, 1st KAIST-Toky Tech Joint Workshop on Fracture, Reliability and advanced Materials, 2004 |
42 | Shape optimal design of a torsion bar and clamped beams using boundary element method = 경계요소법을 이용한 비틀림 축과 고정보의 형상최적설계link Lee, Choon-Yeol; 이춘열; et al, 한국과학기술원, 1985 |
43 | Smooth Boundary Topology Optimization and its Application to Hip Prosthesis Design 곽병만, KSME 2005 Fall Annual Meeting, pp.733 - 738, 2005 |
44 | Smooth boundary topology optimization using B-spline and hole generation = 구멍 생성과 형상 최적화를 이용한 부드러운 경계 위상최적화법의 개발link Lee, Soo-Bum; 이수범; et al, 한국과학기술원, 2007 |
45 | Stochastic design of optimum mechanism with tolerance and clearance considering manufacturing cost = 제조공차와 간극을 가진 기구의 제조비용을 고려한 추계적 최적설계link Rhyu, Je-Ha; 류제하; et al, 한국과학기술원, 1984 |
46 | Stuctural design of the bed which supports micro aspherical lens fabrication system using the design optimization technique 곽병만, KSPE Spring meeting, 2005 |
47 | Study of stress aging treatment and its effect on material properties of Cu-Zn alloys = 구리 합금에 대한 응력 시효 처리 및 그 효과의 연구link Kwak, Joo-Young; 곽주영; et al, 한국과학기술원, 1981 |
48 | TFT-LCD 용 유리패널의 최적 지지 위치 선정에 관한 연구 = Study on the optimal supporting positions of TFT-LCD glass panellink 정병창; Jung, Byung-Chang; 곽병만; 윤성기; et al, 한국과학기술원, 2004 |
49 | Topology Optimization for a Knuckle using Design Space Adjustment and Refinement 곽병만, KSME 2005 Fall Annual Meeting, pp.1019 - 1024, 2005 |
50 | Trolley assembly for a crane and crane comprising said trolley assembly 정윤섭; 장인권; 김은호; 주한종; 김경수; 김경일; 곽병만, 2013-08-14 |
51 | Vortex tube 의 냉각 특성과 그 응용 = Study on the characteristics of vortex tube and its applications to refrigeration cyclelink 김영태; Kim, Young-Tae; et al, 한국과학기술원, 1981 |
52 | XML을 활용한 최적설계 마크업 언어의 개발 및 응용 = Development and application of optimal design markup language using XMLlink 신정호; Shin, Jeong-Ho; et al, 한국과학기술원, 2005 |
53 | 각국 규격에 따른 천정크레인 기어더 부분의 최적설계 = Optimal design of electric overhead crane girders satisfying various specificationslink 조성욱; Cho, Seong-Wook; et al, 한국과학기술원, 1981 |
54 | 간극이 있는 동적 시스템의 시뮤레이션 = Dynamic simulation of mechanical system with clearanceslink 이건복; Lee, Gun-Bok; et al, 한국과학기술원, 1978 |
55 | 강구의 평판에 대한 저속도 충돌해석 = Low velocity impact analysis of a steel sphere on a platelink 최주영; Choi, Jou-Young; et al, 한국과학기술원, 1992 |
56 | 개선된 선택적 정밀도 합성방법을 이용한 평면4절 기구의 최적합성 = Optimization of planar four-bar mechanisms using modified selective precision synthesislink 김경영; Kim, Kyung-Young; et al, 한국과학기술원, 1995 |
57 | 개선된 현수 방정식과 접촉 역학을 이용한 일반적 궤도 구동 시스템의 해석 = Analysis of tracked system using a modified catenary equation and contact mechanicslink 윤병동; Youn, Byeng-Dong; et al, 한국과학기술원, 1998 |
58 | 경계 조건 최적화를 위한 설계 민감도 해석 및 응용 = Design sensitivity analysis for boundary condition optimization and its applicationslink 손재홍; Son, Jae-Hong; et al, 한국과학기술원, 1993 |
59 | 경계요소법과 근사해석법을 이용한 피로 수명 형상 최적설계 = Shape optimal design for durability using boundary integral equation and semi-analytic sensitivity analysis methodlink 이창원; Lee, Chang-Won; et al, 한국과학기술원, 1998 |
60 | 경계요소법에 의한 고유치 조건하의 막 형상 최적설계 = Shape optimal design of membrane with natural frequency constraints by a boundary element methodlink 박준; Park, Jun; 곽병만; 홍창선; et al, 한국과학기술원, 1988 |
61 | 경계요소법에 의한 하중전달용 후크의 2차원 최적형상설계 = Optimal shape design in 2-D of a load-carrying hook by boundary element methodlink 정일용; Chung, Il-Yong; et al, 한국과학기술원, 1990 |
62 | 경계요소법을 이용한 2차원 탄성문제의 신뢰도를 고려한 형상최적설계 = Reliability-based shape optimization of 2-dimensional elastic problems using BEMlink 김동원; Kim, Dong-Won; et al, 한국과학기술원, 1996 |
63 | 경계요소법을 이용한 ECM의 가공물모양 예측 및 공구의 형상최적설계 = Tool shape design for electrochemical machining and prediction of workpiece shape by boundary element methodlink 이강운; Lee, Kang-Wun; et al, 한국과학기술원, 1991 |