Showing results 7501 to 7560 of 12354
Prediction of Darcy-Forchheimer drag for micro-porous structures of complex geometry using the lattice Boltzmann method Jeong, N; Choi, Do Hyung; Lin, CL, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, v.16, no.10, pp.2240 - 2250, 2006-10 |
Prediction of ductile fracture for advanced high strength steel with a new criterion: Experiments and simulation Lou, Yanshan; Huh, Hoon, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.213, no.8, pp.1284 - 1302, 2013-08 |
Prediction of ductile fracture in cold forging of aluminum alloy Kim, HS; Im, Yong-Taek; Geiger, M, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, v.121, no.3, pp.336 - 344, 1999-08 |
PREDICTION OF FAILURE CHARACTERISTICS OF SPOT WELDS OF DP AND TRIP STEELS WITH AN EQUIVALENT STRENGTH FAILURE MODEL Ha, J.; Huh, Hoon; Song, J. H.; Lim, J. H., INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, v.14, no.1, pp.67 - 78, 2013-02 |
Prediction of failure in bending of an aluminium sheet alloy Pradeaua, A; Thuillier, S; Yoon, Jeong Whan, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.119, pp.23 - 35, 2016-12 |
Prediction of fracture forming limit for DP780 steel sheet Lou, Yanshan; Lim, Sung-Jun; Huh, Hoon, METALS AND MATERIALS INTERNATIONAL, v.19, no.4, pp.697 - 705, 2013-07 |
Prediction of fracture in a hub-hole expansion with a defected-edge model Lee, J. S.; Huh, H., proc. KSTP, pp.131~134, 2004 |
Prediction of fracture in hub hole expansion process using ductile fracture criteria Ko, Y. K.; Lee, J. S.; Huh, H.; Kim, H. K.; Park, S. H., proc. KSTP, pp.160-163, 2004 |
Prediction of fracture in hub-hole expanding process using a new ductile fracture criterion , Proceedings of International Conference on Advanced Forming and Die Manufacturing Technology, Busan, September 2006, 2007-06-12 |
Prediction of fracture in hub-hole expanding process using a new ductile fracture criterion Ko, Youn-Ki; Lee, J. S.; Huh, Hoon; Kim, H. K.; Park, S. H., JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.187, no.12, pp.358 - 362, 2007-06 |
Prediction of fracture initiation in square cup drawing of DP980 using an anisotropic ductile fracture criterion Park, N; Huh, H; Yoon, Jeong Whan, JOURNAL OF PHYSICS: CONFERENCE SERIES, v.896, no.1, 2017-09 |
Prediction of ground reaction forces using the artificial neural network from capacitive self-sensing values of composite ankle springs for exo-robots Hong, Hyunsoo; Sarfraz, Muhammad Salman; Jeong, Mingoo; Kim, Taeyeon; Choi, Jungrak; Kong, Kyoungchul; Park, Inkyu; et al, COMPOSITE STRUCTURES, v.301, 2022-12 |
Prediction of Growth Behavior of Initially Semicircular Surface Cracks under Axial Loading j.h.kim; j.h.song, 대한기계학회논문집 A, v.16, no.8, pp.1536 - 1544, 1992 |
Prediction of Helicopter Rotor Loads Using Time-Spectral Computational Fluid Dynamics and an Exact Fluid-Structure Interface Choi, Seongim; Datta, Anubhav; Alonso, Juan J., JOURNAL OF THE AMERICAN HELICOPTER SOCIETY, v.56, no.4, pp.1 - 15, 2011-10 |
Prediction of intake noise of an automotive engine in run-up condition Ih, Jeong-Guon; Kim, Hoi-Jeon; Lee, Seong-Hyun; Shinoda, K, APPLIED ACOUSTICS, v.70, no.2, pp.347 - 355, 2009-02 |
Prediction of laser-spot-weld shape by numerical analysis and neural network Chang, WS; Na, Suck-Joo, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, v.32, no.4, pp.723 - 731, 2001-08 |
Prediction of Lower Limb Kinetics and Kinematics during Walking by a Single IMU on the Lower Back Using Machine Learning![]() Lim, Hyerim; Kim, Bumjoon; Park, Sukyung, SENSORS, v.20, no.1, 2020-01 |
Prediction of Mode Parameters and Moment-Rotation Curves for Crushed Thin-Walled Trapezoidal Tubes in Bending Lee, Byung-Chai; Park, MS, JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, v.63, no.2, pp.453 - 459, 1996-06 |
Prediction of necking and fracture based on the crystal plasticity Kim, JB; Seo, WS; Hong, SH; Yoon, Jeong Whan, STEEL RESEARCH INTERNATIONAL, v.SPL, pp.1187 - 1190, 2012 |
Prediction of NO in turbulent diffusion flames using Eulerian particle flamelet model Lee, K. W.; Choi, Do Hyung, COMBUSTION THEORY AND MODELLING, v.12, no.5, pp.905 - 927, 2008 |
PREDICTION OF SEPARATION-BUBBLES USING IMPROVED TRANSITION CRITERION WITH 2-EQUATION TURBULENCE MODEL Choi, Do Hyung; LEE, EH, AIAA JOURNAL, v.33, no.8, pp.1512 - 1514, 1995-08 |
Prediction of shrinkage and warpage in consideration of residual stress in integrated simulation of injection molding Choi, DS; Im, Yong-Taek, COMPOSITE STRUCTURES, v.47, no.1-4, pp.655 - 665, 1999-12 |
Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function Yoon, Jeong Whan; Barlat, F; Dick, RE; Karabin, ME, INTERNATIONAL JOURNAL OF PLASTICITY, v.22, no.1, pp.174 - 193, 2006 |
Prediction of sloshing pressure using image-based deep learning Kim, Ki Jong; Kim, Daegyoum, OCEAN ENGINEERING, 2024-07 |
Prediction of Solder Joint Profile in J-lead Connection Choong Don Yoo, QUARTERLY JOURNAL OF JAPAN WELDING SOCIETY, v.0, no.0, pp.0 - 0, 1999-05 |
Prediction of sound level at high-frequency bands by means of a simplified boundary element method Kim, JK; Ih, Jeong-Guon, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.112, no.6, pp.2645 - 2655, 2002-12 |
Prediction of sound transmission loss through multilayered panels by using Gaussian distribution of directional incident energy Kang, HJ; Ih, Jeong-Guon; Kim, JS; Kim, HS, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.107, no.3, pp.1413 - 1420, 2000-03 |
Prediction of surface and adhesion energies of nanoimprint lithography materials and anti-sticking layers by molecular dynamics simulation Kang, Ji-Hoon; Kim, Kwang-Seop; Kim, Kyung-Woong, APPLIED SURFACE SCIENCE, v.258, no.14, pp.5438 - 5442, 2012-05 |
Prediction of the bending behavior after pre-strain of an aluminum alloy Pradeau, A.; Thuillier, Sandrine; Yoon, Jeong Whan, AIP Conference Proceedings, v.1769, 2016-10 |
Prediction of the effective thermal conductivity of microsphere insulation Jin, Lingxue; Park, Jiho; Lee, Cheonkyu; Seo, Mansu; Jeong, Sang-Kwon, Progress in Superconductivity and Cryogenics (PSAC), v.16, no.1, pp.36 - 41, 2014-03 |
Prediction of the effects of hardening and texture heterogeneities by finite element analysis based on the Taylor model Jung, Kyung-Hwan; Kim, Dong-Kyu; Im, Yong-Taek; Lee, Yong-Shin, INTERNATIONAL JOURNAL OF PLASTICITY, v.42, pp.120 - 140, 2013-03 |
Prediction of the resonance frequency of natural convection in an enclosure with time-periodic heating imposed on one sidewall Kwak, HS; Kuwahara, K; Hyun, Jae Min, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.41, no.20, pp.3157 - 3160, 1998-10 |
Prediction of the tensile load capability of co-cured steel-composite tubular single lap joints considering thermal degradation Lee, Dai Gil; Cho, DH, JOURNAL OF COMPOSITE MATERIALS, v.34, no.8, pp.689 - 722, 2000 |
Prediction of the tensile load-bearing capacity of a co-cured single lap joint considering residual thermal stresses Shin, KC; Lee, Jungju, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.14, no.13, pp.1691 - 1704, 2000 |
PREDICTION OF THE THERMAL PERFORMANCE OF AN INDUSTRIAL NATURAL GAS-FIRED FURNACE. Song, Tae-Ho; Viskanta, R., GASWAERME INTERNATIONAL, v.37, no.1, pp.22 - 30, 1988-01 |
Prediction of three-dimensional solder joint profile in gullwing leads Yoo, Choong-Don; Choi, Tong P.; Lee, Tae S., INTERNATIONAL JOURNAL OF MICROCIRCUITS AND ELECTRONIC PACKAGING, v.21, no.2, pp.162 - 170, 1998 |
Prediction of time-dependent swelling of flexible polymer substrates using hygro-mechanical finite element simulations Pyo, Jae-Bum; Lee, Tae-Ik; Kim, Cheolgyu; Kim, Min Sung; Kim, Taek-Soo, SOFT MATTER, v.12, no.18, pp.4135 - 4141, 2016-03 |
PREDICTION OF TRANSIENT OSCILLATING FLOW IN CZOCHRALSKI CONVECTION Sung, Hyung Jin; JUNG, YJ; OZOE, H, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.38, pp.1627 - 1636, 1995 |
Prediction of vibrational energy distribution in the thin plate at high-frequency bands by using the ray tracing method Chae, KS; Ih, Jeong-Guon, JOURNAL OF SOUND AND VIBRATION, v.240, no.2, pp.263 - 292, 2001-02 |
Prediction of welding residual stress with real-time phase transformation by CFD thermal analysis Cheon, Jason Hyeonpil; Na, Suck-Joo, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.131, pp.37 - 51, 2017-10 |
Prediction of wrinkling initiation in sheet metal forming processes Kim, JB; Yang, Dong-Yol, ENGINEERING COMPUTATIONS, v.20, no.1-2, pp.6 - 39, 2003 |
PREDICTIONS OF STRUCTURE WITH SOOT CONCENTRATION OF PROPANE-AIR TURBULENT-DIFFUSION FLAMES JURNG, J; Shin, Hyun Dong; LEE, CS, JOURNAL OF THE INSTITUTE OF ENERGY, v.61, no.449, pp.201 - 208, 1988-12 |
Predictive Evaluation of Ship Collision Risk Using the Concept of Probability Flow Park, Jeonghong; Kim, Jinwhan, IEEE JOURNAL OF OCEANIC ENGINEERING, v.42, no.4, pp.836 - 845, 2017-10 |
Predictive model for bearing torque in bolt fastening Kang, Sukkyung; Shin, Somin; Hwang, Hyena; Kim, Sanha, CIRP ANNALS-MANUFACTURING TECHNOLOGY, v.71, no.1, pp.489 - 492, 2022-05 |
Predictive modelling-based design and experiments for synthesis and spinning of bioinspired silk fibres![]() Lin, Shangchao; Ryu, Seunghwa; Tokareva, Olena; Gronau, Greta; Jacobsen, MM; Huang, Wenwen; Rizzo, Daniel J.; et al, NATURE COMMUNICATIONS, v.6, 2015-05 |
Predictive Synthesis of Freeform Carbon Nanotube Microarchitectures by Strain-Engineered Chemical Vapor Deposition Park, Sei Jin; Zhao, Hangbo; Kim, Sanha; De Volder, Michael; Hart, A. John, SMALL, v.12, no.32, pp.4393 - 4403, 2016-08 |
Preface Song, Seung Jin; Mochizuki, S.; Jeong, Sangkwon, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.25, no.1, pp.3 - 3, 2011 |
Preface Kwon, Dong-Soo, ADVANCED ROBOTICS, v.20, no.3, pp.281 - 282, 2006 |
Preferential elimination of metallic single-walled carbon nanotubes using microwave irradiation Shim, HC; Song, JW; Kwak, Yoon Keun; Kim, Soohyun; Han, CS, NANOTECHNOLOGY, v.20, no.6, 2009-02 |
Preform design for powdered magnet sinter-forging process with curved shape Seung Ho, Kim; Choong Ho, Lee; Hoon, Huh; Gil Su, Ahn; Chi Yong, Song, Proc. KSTP, Fall Conference, pp.144~147, 1998., 1998 |
Preliminary Evaluation of Noninvasive Microscopic Imaging Techniques for the Study of Vocal Fold Development Boudoux, C.; Leuin, S. C.; Oh, Wang-Yuhl; Suter, M. J.; Desiardins, A. E.; Vakoc, B. J.; Bourna, B. E.; et al, JOURNAL OF VOICE, v.23, no.3, pp.269 - 276, 2009-05 |
PRELIMINARY STUDY ON LASER-MATTER INTERACTION IN LASER-ARC HYBRID WELDING Na, Suck-Joo; Ahn, J., WELDING IN THE WORLD, v.53, no.9-10, pp.R264 - R270, 2009 |
Premixed compression ignition combustion with various injector configurations in a heavy duty diesel engine Jung, Yong-Jin; Bae, Choong-Sik; Choi, Seibum B; Shin, Hyun-Dong, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, v.227, no.D3, pp.422 - 432, 2013 |
Premixed flame propagation of CH 4 and C 3 H8 in a narrow-gap disk burner using constant-volume processes at elevated-pressure Lee, Sang Min; Jang, Hyejin; Kim, Nam Il, COMBUSTION AND FLAME, v.231, 2021-09 |
Preparation and Characterization of Hybrid Structured MWCNT/UHMWPE Fiber Sensors for Strain Sensing and Load Bearing of Composite Structures On, Seung Yoon; Park, Steve; Kim, Seong Su, ADVANCED MATERIALS TECHNOLOGIES, v.4, no.12, pp.1900807, 2019-12 |
Preparation, characterization, engine combustion and emission characteristics of rapeseed oil based hybrid fuels Qi, D. H.; Bae, Choongsik; Feng, Y. M.; Jia, C. C.; Bian, Y. Z., RENEWABLE ENERGY, v.60, pp.98 - 106, 2013-12 |
Presentation of Surface Height Profiles Based on Frequency Modulation at Constant Amplitude Using Vibrotactile Elements Lim, Soo-Chul; Kyung, Ki-Uk; Kwon, Dong-Soo, ADVANCED ROBOTICS, v.25, no.16, pp.2065 - 2081, 2011 |
Pressure boundary condition for incompressible flow in an unstructured multigrid application Choi, Do-Hyung; Lee, SD, COMPUTATIONAL FLUID DYNAMICS JOURNAL, v.12, no.4, pp.647 - 653, 2004-01 |
Pressure control of an electro-hydraulic actuated clutch via novel hysteresis model Jung, Sang Hun; Choi, Seibum B.; Ko, Youngho; Kim, Jinsung; Lee, Hoyoung, CONTROL ENGINEERING PRACTICE, v.91, 2019-10 |
Pressure drop and heat transfer correlations for triangular folded fin heat sinks Ji, Tae Ho; Kim, Seo Young; Hyun, Jae Min, IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, v.30, no.1, pp.3 - 8, 2007-03 |
Discover