DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이창환 | ko |
dc.contributor.author | 양동열 | ko |
dc.contributor.author | 이승륜 | ko |
dc.contributor.author | 강동우 | ko |
dc.contributor.author | 장인갑 | ko |
dc.contributor.author | 이태원 | ko |
dc.date.accessioned | 2013-03-12T17:20:54Z | - |
dc.date.available | 2013-03-12T17:20:54Z | - |
dc.date.created | 2013-01-09 | - |
dc.date.created | 2013-01-09 | - |
dc.date.issued | 2012-08 | - |
dc.identifier.citation | 소성가공, v.21, no.5, pp.298 - 304 | - |
dc.identifier.issn | 1225-696X | - |
dc.identifier.uri | http://hdl.handle.net/10203/102988 | - |
dc.description.abstract | The shielded slot plates for a molten carbonate fuel cell(MCFC) have a sheared corrugated trapezoidal pattern. In the FEM simulations for the production of the shielded slot plate, the user material subroutine VUMAT in the commercial FEM software ABAQUS was used to implement a ductile fracture criterion. The critical damage value for the ductile fracture criterion was determined by comparing the experimental results of the shearing process with the simulation results. Using the ductile fracture criterion, the FEM simulation of the three-dimensional forming process of the shielded slot plate was conducted. The effects of the shearing process on the forming process were examined through FEM simulation and experiments. The forming simulation of nine unit cells was conducted. Using the simulation results of the forming process, the deformed shape after springback was calculated. The experimental result shows good agreement with the simulation. | - |
dc.language | Korean | - |
dc.publisher | 한국소성가공학회 | - |
dc.title | 연성파괴조건을 사용한 용융탄산염 연료전지용 쉴디드 슬롯 플레이트의 성형 공정 유한요소 해석 | - |
dc.title.alternative | Simulation of the Forming Process of the Shielded Slot Plate for the Molten Carbonate Fuel Cell Using a Ductile Fracture Criterion | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 21 | - |
dc.citation.issue | 5 | - |
dc.citation.beginningpage | 298 | - |
dc.citation.endingpage | 304 | - |
dc.citation.publicationname | 소성가공 | - |
dc.identifier.kciid | ART001682893 | - |
dc.contributor.localauthor | 양동열 | - |
dc.contributor.nonIdAuthor | 이창환 | - |
dc.contributor.nonIdAuthor | 이승륜 | - |
dc.contributor.nonIdAuthor | 강동우 | - |
dc.contributor.nonIdAuthor | 장인갑 | - |
dc.contributor.nonIdAuthor | 이태원 | - |
dc.subject.keywordAuthor | MCFC | - |
dc.subject.keywordAuthor | Shielded Slot Plate | - |
dc.subject.keywordAuthor | Ductile Fracture Criterion | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.