Browse "College of Engineering(공과대학)" by Issue Date 

Jump to a point in the index:

Showing results 181 to 200 of 201162

181
(An) experimental study on laminar film condensation heat transfer augmentation on circumferential surfaces of horizontal tubes = 수평관 주위 표면에서의 응축 열전달 촉진에 관한 실험적 연구link

Lee, Soon-Bok; 이순복; et al, 한국과학기술원, 1976

182
전산기에 의한 공작기계의 수치제어에 관한 연구 = A study on the computer numerical control of machine toollink

허주; Hoh, Joo; et al, 한국과학기술원, 1976

183
특수 차량의 동적 특성에 관한 연구 = A study on a dynamic characteristics of a special vehicle systemlink

나문수; Na, Moon-Soo; et al, 한국과학기술원, 1976

184
Frame analysis structural design system = 콤퓨터를 이용한 구조해석 및 설계link

O, Hung-Kuk; 오흥국; et al, 한국과학기술원, 1976

185
다공성 소결 베아링 시험기의 설계와 이의 실험적 조사 = Design of a porous metal bearing testing machine and its experimental testlink

윤영환; Yun, Yeong-Hwan; et al, 한국과학기술원, 1976

186
사각관을 이용한 태양열 집열기의 성능에 관한 연구 = A study on the performance of flat-plate solar collector using rectangular tubeslink

이상천; Lee, Sang-Chun; et al, 한국과학기술원, 1976

187
판재 금속의 성형도에 관한 연구 = A study on the formability of sheet metallink

문의준; Moon, Eui-Joon; et al, 한국과학기술원, 1976

188
열펌프시스템의 최적설계에 관한 연구 = A study on the optimization of heat pump systemlink

이상용; Lee, Sang-Yong; et al, 한국과학기술원, 1976

189
Preferred orientations and microstructures of chromium electrodeposits = 크롬電着層의 優先配向과 顯微鏡組織link

Park, Jeong-Real; 박정렬; et al, 한국과학기술원, 1976

190
Lean alloys 의 耐摩耗性에 관한 硏究 = Studies on the abrasive wear resistance of the lean alloyslink

김성완; Kim, Sung-Wan; et al, 한국과학기술원, 1976

191
(The) effect of iron addition on the microstructures and mechanical properties of Cu-11.0% Al alloy = Cu-11.0% Al합금에의 철 첨가가 현미 경조직과 기계적 성질에 미치는 영향link

Yeum, Kook-Sun; 염국선; et al, 한국과학기술원, 1976

192
저합금 강의 변태조직에 따른 인성과 수소취성 = Effect of transformation structures on the toughness and hydrogen embrittlement of low alloy steellink

김지혁; Kiehm, Ji-Hyuck; et al, 한국과학기술원, 1976

193
$CuCl_2$촉매하에서 규소와 염화수소의 반응에 의한 trichlorosilane 의 생성 = The preparation of trichlorosilane from the cupric chloride-catalyzed reaction of silicon and hydrogen chloridelink

이임열; Lee, Rhim-Youl; et al, 한국과학기술원, 1976

194
W-Ni-Fe 의 고밀도 소결합금에 있어서 텅그스텐 분말의 크기, 성분 및 소결온도가 밀도와 기계적 성질에 미치는 영향 = The effects of tungsten power size, composition and sintering temperature on properties of W-Ni-Fe heavy alloylink

양성근; Yang, Sung-Keun; et al, 한국과학기술원, 1976

195
슬래그 입도가 슬래그 혼합물의 결정화와 기포형성에 미치는 영향 = The effects of the slag particle size on the crystallization and the foam-formation in slag-contained batchlink

박기형; Park, Kee-Hyung; et al, 한국과학기술원, 1976

196
중탄소 크롬-몰리강의 내마모성에 대한 연구 = Studies on the abrasive wear resistance of the medium carbon Cr-Mo steellink

최수한; Choi, Soo-Han; et al, 한국과학기술원, 1976

197
ESR 에서 용해속도가 잉고트 미세조직에 미치는 영향 = The effect of melt rate on the microstructure of ingot in the electroslag remelting processlink

서상희; Suh, Sang-Hee; et al, 한국과학기술원, 1976

198
Fe-Al-N 합금에서 질화 알루미늄의 석출 및 성장에 관한 연구 = The study on precipitation and growth of AlN in the Fe-Al-N alloylink

이종무; Lee, Chong-Mu; et al, 한국과학기술원, 1976

199
알루미늄재료의 양극산화피막구조 및 합금원소가 교류전해발색에 미치는 영향 = Effects of anodic oxide structure and alloying elements on alternating current color anodizing of aluminum alloyslink

이진형; Lee, Jin-Hyung; et al, 한국과학기술원, 1976

200
인장속도의 변화를 통한 강의수소취성기구에 관한 연구 = Investigation of the hydrogen embrittlement mechanism by means of variation of the strain ratelink

김윤기; Kim, Yoon-Gi; et al, 한국과학기술원, 1976

rss_1.0 rss_2.0 atom_1.0