DC Field | Value | Language |
---|---|---|
dc.contributor.author | Park, Beom Kyeong | ko |
dc.contributor.author | Song, Rak-Hyun | ko |
dc.contributor.author | Lee, Seung-Bok | ko |
dc.contributor.author | Lim, Tak-Hyoung | ko |
dc.contributor.author | Park, Seok-Joo | ko |
dc.contributor.author | Park, Chong-Ook | ko |
dc.contributor.author | Lee, Jong-Won | ko |
dc.date.accessioned | 2017-01-12T07:05:06Z | - |
dc.date.available | 2017-01-12T07:05:06Z | - |
dc.date.created | 2016-12-27 | - |
dc.date.created | 2016-12-27 | - |
dc.date.issued | 2016 | - |
dc.identifier.citation | JOURNAL OF THE ELECTROCHEMICAL SOCIETY, v.163, no.9, pp.F1066 - F1071 | - |
dc.identifier.issn | 0013-4651 | - |
dc.identifier.uri | http://hdl.handle.net/10203/218281 | - |
dc.description.abstract | Interconnects in solid oxide fuel cells (SOFCs) serve two essential roles, namely, cell-to-cell electrical connection and the separation of fuel and oxidant gases. It is of practical significance to develop a protective coating that is capable of improving the surface stability of metallic interconnects while maintaining their electrical properties. Perovskite-type oxides are recognized as promising materials for protective coatings; however, it is difficult to fabricate high-density films by conventional powder-sintering processes. In this paper, we report a facile electrodeposition-based approach to preparing perovskite oxide films on SOFC interconnects. A high density, adhesive Ca-doped LaCoO3 perovskite film of similar to 1.3 mu m thickness is directly formed on an SOFC interconnect through the "chemically assisted electrodeposition" of hydroxide combined with the thermal conversion of hydroxide to oxide. In the proposed synthesis method, the electrodeposition parameters, such as solution composition and deposition time, have a strong influence on the composition, microstructure, and adhesion of the perovskite oxide film. The fabricated film exhibits outstanding performance as a protective coating for SOFC interconnects, as evidenced by a low area-specific resistance of 14.4 m Omega cm(2) at 800 degrees C and high stability during both continuous operation and repeated thermal cycling. (C) 2016 The Electrochemical Society. All rights reserved. | - |
dc.language | English | - |
dc.publisher | ELECTROCHEMICAL SOC INC | - |
dc.subject | FERRITIC STAINLESS-STEEL | - |
dc.subject | METALLIC INTERCONNECT | - |
dc.subject | TRANSITION | - |
dc.subject | OXIDATION | - |
dc.subject | COATINGS | - |
dc.subject | SPECTROSCOPY | - |
dc.subject | DEPOSITION | - |
dc.subject | BEHAVIOR | - |
dc.title | Facile Synthesis of Ca-Doped LaCoO3 Perovskite via Chemically Assisted Electrodeposition as a Protective Film on Solid Oxide Fuel Cell Interconnects | - |
dc.type | Article | - |
dc.identifier.wosid | 000388988100092 | - |
dc.identifier.scopusid | 2-s2.0-84982757083 | - |
dc.type.rims | ART | - |
dc.citation.volume | 163 | - |
dc.citation.issue | 9 | - |
dc.citation.beginningpage | F1066 | - |
dc.citation.endingpage | F1071 | - |
dc.citation.publicationname | JOURNAL OF THE ELECTROCHEMICAL SOCIETY | - |
dc.identifier.doi | 10.1149/2.0641609jes | - |
dc.contributor.localauthor | Park, Chong-Ook | - |
dc.contributor.nonIdAuthor | Song, Rak-Hyun | - |
dc.contributor.nonIdAuthor | Lee, Seung-Bok | - |
dc.contributor.nonIdAuthor | Lim, Tak-Hyoung | - |
dc.contributor.nonIdAuthor | Park, Seok-Joo | - |
dc.contributor.nonIdAuthor | Lee, Jong-Won | - |
dc.description.isOpenAccess | N | - |
dc.type.journalArticle | Article | - |
dc.subject.keywordPlus | FERRITIC STAINLESS-STEEL | - |
dc.subject.keywordPlus | METALLIC INTERCONNECT | - |
dc.subject.keywordPlus | TRANSITION | - |
dc.subject.keywordPlus | OXIDATION | - |
dc.subject.keywordPlus | COATINGS | - |
dc.subject.keywordPlus | SPECTROSCOPY | - |
dc.subject.keywordPlus | DEPOSITION | - |
dc.subject.keywordPlus | BEHAVIOR | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.