Browse "School of Mechanical and Aerospace Engineering(기계항공공학부)" by Type Article

Showing results 6601 to 6660 of 15690

6601
Influence of process parameters on the surface roughness in hotwire cutting of EPS foam sheet for VLM-S rapid prototyping process

Ahn, DG; Lee, SH; Yang, Dong-Yol, JOURNAL OF MATERIALS SCIENCE, v.40, no.21, pp.5699 - 5702, 2005-11

6602
Influence of radial fuel staging on combustion instabilities and exhaust emissions from lean-premixed multi-element hydrogen/methane/air flames

Jin, Ukhwa; Kim, Kyu Tae, COMBUSTION AND FLAME, v.242, 2022-08

6603
Influence of reflected arc light on vision sensors for automatic GTAW systems

Yu, JY; Kim, JI; Na, Suck-Joo, WELDING JOURNAL, v.82, no.2, pp.36 - 42, 2003-02

6604
Influence of rotational asymmetry on thermoacoustic instabilities in a can-annular lean-premixed combustor

Moon, Kihun; Yoon, Changjin; Kim, Kyu Tae, COMBUSTION AND FLAME, v.223, no.1, pp.295 - 306, 2021-01

6605
Influence of simulation methods of temperature distribution on thermal and metallurgical characteristics in GMA welding

Cheon, Jason; Na, Suck-Joo, MATERIALS & DESIGN, v.108, pp.183 - 194, 2016-10

6606
Influence of spring dynamics and friction on a spring-actuated cam system

Ahn, KY; Kim, Soohyun, ARCHIVE OF APPLIED MECHANICS, v.71, no.8, pp.497 - 508, 2001-08

6607
Influence of Steering Angle Profiles on the Orbit Transfer Trajectory

Lee, Donghun; Song, Young-Joo, MATHEMATICAL PROBLEMS IN ENGINEERING, v.2021, 2021-04

6608
Influence of surface wettability on transition of two-phase flow pattern in round mini-channels

Lee, Chi Young; Lee, Sang Yong, INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, v.34, no.7, pp.706 - 711, 2008-07

6609
The Influence of Swirl Ratio and Injection Parameters on CO Emission and Fuel Conversion Efficiency for High-Dilution, Low-Temperature Combustion in an Automotive Diesel Engine

Kook, Sanghoon; Bae, Choongsik; C Miles, Paul; Choi, Dae; Bergin, Michael; Reitz, D. Rolf, SAE Transactions, Journal of Engines, Vol. 114, Sec. 3, 2006-04

6610
Influence of Taylor cone size on droplet generation in an indium liquid metal ion source

Tajmar, Martin, APPLIED PHYSICS A-MATERIALS SCIENCE PROCESSING, v.81, no.7, pp.1447 - 1450, 2005-11

6611
Influence of tensile properties on hole expansion ratio investigated using a generative adversarial imputation network with explainable artificial intelligence

Lee, Jeong Ah; Park, Jaejung; Choi, Yeon Taek; Kim, Rae Eon; Jung, Jaimyun; Lee, Seungchul; Seo, Min Hong; et al, JOURNAL OF MATERIALS SCIENCE, v.58, no.11, pp.4780 - 4794, 2023-03

6612
Influence of Tensile Speeds on the Failure Loads of the DP590 Spot Weld under Various Combined Loading Conditions

Song, Jung Han; Huh, Hoon, ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2015

6613
Influence of the delivery systems using a microneedle array on the permeation of a hydrophilic molecule, calcein

Oh, Jae-Ho; Park, Hyoun-Hyang; Do, Ki-Young; Han, Manhee; Hyun, Dong-Hun; Kim, Chang-Gyu; Kim, Chang-Hyeon; et al, EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS, v.69, no.3, pp.1040 - 1045, 2008-08

6614
The Influence of the Particle Size of Silica on the Ballistic Performance of Fabrics Impregnated with Silica Colloidal Suspension

Lee, Bok-Won; Kim, Il-Jin; Kim, Chun-Gon, Jounal of composite Materials, Vol. 43, No.23, 2009-11

6615
Influence of the silicon substrate thickness on the response of thin film pyroelectric detectors

Ko, JS; Liu, WG; Zhu, WG; Kwak, Byung Man, SOLID-STATE ELECTRONICS, v.46, no.8, pp.1155 - 1161, 2002-08

6616
Influence of the start-up rate on the electrochemical impedance of a low-temperature solid oxide fuel cell fabricated by reactive sputtering

Kang, Sungmin; Chang, Ikwhang; Pornprasertsuk, Rojana; Bae, Joongmyeon; Cha, Suk Won, THIN SOLID FILMS, v.689, pp.137445, 2019-11

6617
Influence of the steel core of composite squirrel cage rotor on motor performance

Chang, SH; Lee, Dai Gil, POLYMER COMPOSITES, v.22, no.3, pp.371 - 383, 2001-06

6618
Influence of Transforming Growth Factors beta 1 and beta 3 in the Scar Formation Process

Lee, Joon Seok; Cho, Hyun Geun; Lee, Jeong Woo; Oh, Eun Jung; Kim, Hyun Mi; Ko, Ung Hyun; Kang, Minwoo; et al, JOURNAL OF CRANIOFACIAL SURGERY, v.34, no.3, pp.904 - 909, 2023-05

6619
Influence of two-dimensional smooth humps on linear and non-linear instability of a supersonic boundary layer

Park, Dong-Hun; Park, Seung-O, COMPUTERS FLUIDS, v.79, pp.140 - 149, 2013-06

6620
Influence of unsteady wake on a turbulent separation bubble

Chun, S; Sung, Hyung Jin, EXPERIMENTS IN FLUIDS, v.32, pp.269 - 279, 2002

6621
Influence of varying upper ocean stratification on coastal near-inertial currents

Kim, Sung Yong; Kurapov, Alexander; Kosro, P. Michael, JOURNAL OF GEOPHYSICAL RESEARCH-OCEANS, v.120, no.12, pp.8504 - 8527, 2015-12

6622
Influence of wall-attached structures on the boundary of the quiescent core region in turbulent pipe flow

Yang, Jongmin; Hwang, Jinyul; Sung, Hyung Jin, PHYSICAL REVIEW FLUIDS, v.4, no.11, 2019-11

6623
Influences of partial anterior cruciate ligament injury on anterior cruciate ligament tensional force and kinematic stability during walking

Koo, Young-Jun; Seon, Jong Keun; Lee, Giuk; Koo, Seungbum, JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, v.145, no.1, 2023-01

6624
Informative windowed forecasting of continuous-time linear systems for mutual information-based sensor planning

Choi, Han-Lim; Ha, Jung-Su, AUTOMATICA, v.57, pp.97 - 104, 2015-07

6625
Infrared radiation modeling of NO, OH, CO, H2O, and CO2 for emissivity/radiance prediction at high temperature

Nam, Hyun-Jae; Kwon, Oh-Joon, INFRARED PHYSICS & TECHNOLOGY, v.67, pp.283 - 291, 2014-11

6626
Infrared Radiative Properties of Heavily Doped Silicon at Room Temperature

Basu, S.; Lee, Bong Jae; Zhang, Z. M., JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, v.132, no.2, 2010-02

6627
Infrared radiative properties of submicron metallic slit arrays

Chen, Y-B; Lee, Bong Jae; Zhang, Z. M., JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, v.130, no.8, 2008-08

6628
Infrared signature characteristic of a microturbine engine exhaust plume

Gu, Bonchan; Baek, Seung Wook; Jegal, Hyunwook; Choi, Seong Man; Kim, Won Cheol, INFRARED PHYSICS AND TECHNOLOGY, v.86, pp.11 - 22, 2017-11

6629
Inherent background coefficients for acoustic resonance scattering from submerged, multilayered, cylindrical structures

Joo, YS; Ih, Jeong-Guon; Choi, MS, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.103, no.2, pp.900 - 910, 1998-02

6630
Inhibition effect of carbon dioxide on the oxidation of hydrogen over a platinum foil catalyst

Nam, CH; Shin, Hyun Dong, CATALYSIS TODAY, v.83, pp.257 - 264, 2003-08

6631
Inhibition of methane hydrate re-formation in offshore pipelines with a kinetic hydrate inhibitor

Seo, Yutaek; Kang, Seong-Pil, JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, v.88-89, no.SI, pp.61 - 66, 2012-06

6632
Inhibition of Natural Gas Hydrates in the Presence of Liquid Hydrocarbons Forming Structure H

Seo, Yutaek; Kang, Seong-Pil; Jang, Wonho; Kim, Seonwook, JOURNAL OF PHYSICAL CHEMISTRY B, v.114, no.18, pp.6084 - 6088, 2010-05

6633
Inhibition of Rho-Associated Protein Kinase Increases the Angiogenic Potential of Mesenchymal Stem Cell Aggregates via Paracrine Effects

Hong, Soyoung; Lee, Jae Yeon; Hwang, Changmo; Shin, Jennifer Hyunjong; Park, Yongdoo, TISSUE ENGINEERING PART A, v.22, no.3-4, pp.233 - 243, 2016-02

6634
Initial development of non-evaporating diesel sprays in common-rail injection systems

Kang, J; Bae, Choongsik; Lee, KO, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, v.4, no.4, pp.283 - 298, 2003-08

6635
Initial relaxation of spatially evolving turbulent channel flow with blowing and suction

Chung, YM; Sung, Hyung Jin, AIAA JOURNAL, v.39, no.11, pp.2091 - 2099, 2001-11

6636
Injection Strategy in Natural Gas–Diesel Dual-Fuel Premixed Charge Compression Ignition Combustion under Low Load Conditions

Park, Hyunwook; Shim, Euijoon; Bae, Choongsik, ENGINEERING, v.5, no.3, pp.548 - 557, 2019-06

6637
Injection-seeded high-repetition-rate short-pulse micro-laser based on upconversion nanoparticles

Jiao, Jiannan; Zhou, Donglei; Li, Shufan; Low, Mun Ji; Gao, Yi; An, Jianing; Su, Pei-Chen; et al, NANOSCALE, v.13, no.2, pp.878 - 885, 2021-01

6638
Inkjet-printed Ag@SDC core-shell nanoparticles as a high-performance cathode for low-temperature solid oxide fuel cells

Kamlungsua, Kittiwat; Lee, Tsung-Han; Lee, Suhan; Su, Pei-Chen; Yoon, Yong Jin, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.46, no.60, pp.30853 - 30860, 2021-09

6639
Inlet pressure effects on the static and dynamic characteristics of tilting-pad journal bearings

Kim, Jong-Soo; Kim, Kyung-Woong, JSME INTERNATIONAL JOURNAL(SERIES III), v.35, no.1, pp.121 - 127, 1992-03

6640
INLET PRESSURE EFFECTS ON THE THERMOHYDRODYNAMIC PERFORMANCE OF A LARGE TILTING-PAD JOURNAL BEARING

HA, HC; KIM, HJ; Kim, Kyung-Woong, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, v.117, no.1, pp.160 - 165, 1995-01

6641
Inner-outer interactions of large-scale structures in turbulent channel flow

Hwang, Jinyul; Lee, Jin; Sung, Hyung Jin; Zaki, Tamer A., JOURNAL OF FLUID MECHANICS, v.790, pp.128 - 157, 2016-03

6642
Innovation towards sustainable technologies: A socio-technical perspective on accelerating transition to aviation biofuel

Kim, Yohan; Lee, Joosung; Ahn, Jaemyung, TECHNOLOGICAL FORECASTING AND SOCIAL CHANGE, v.145, pp.317 - 329, 2019-08

6643
Innovative gasketless carbon composite bipolar plates for PEM fuel cells

Lim, Jun-Woo; Kim, Min-Kook; Kim, Ki-Hyun; Lee, Dai-Gil, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.37, no.24, pp.19018 - 19026, 2012-12

6644
INOR 614-Functional assemblies of semiconductor nanocrystal quantum dots on 1-D nanostructures using dielectrophoresis

Jeong, Sohee; Shim, Hyung Cheoul; Kim, Soohyun; Han, Chang Soo, ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, v.236, 2008-08

6645
Inplane and antiplane T-stresses for an interface crack in anisotropic bimaterial

j. h. kim; h. j. moon; Earmme, Youn-Young, MECHANICS OF MATERIALS, v.33, no.1, pp.21 - 32, 2001-01

6646
Input output linearization using time delay control and time delay observer

Lee, Jeong W.; Chang, Pyung-Hun, KSME INTERNATIONAL JOURNAL, v.13, no.7, pp.546 - 556, 1999

6647
Input/output linearization using time delay control and time delayobserver

Lee, Jung W.; Chang, Pyung H., KSME International Journal, Vol.13, No.7, pp.546-556, 1999

6648
Insight into 3-node triangular shell finite elements: the effects of element isotropy and mesh patterns

Lee, PhillSeung; Noh, Hyuk-Chun; Bathe, Klaus-Jurgen, COMPUTERS STRUCTURES, v.85, no.7-8, pp.404 - 418, 2007-04

6649
Insight into finite element shell discretizations by use of the "basic shell mathematical model"

Lee, PhillSeung; Bathe, KJ, COMPUTERS STRUCTURES, v.83, no.1, pp.69 - 90, 2005-01

6650
INSITU ESTIMATION OF AN ACOUSTIC SOURCE IN AN ENCLOSURE AND PREDICTION OF INTERIOR NOISE BY USING THE PRINCIPLE OF VIBROACOUSTIC RECIPROCITY

KIM, BK; Ih, Jeong-Guon, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.93, no.5, pp.2726 - 2731, 1993-05

6651
Instability map based on specific plastic work criterion for hot deformation

Lee, HW; Kwon, HC; Awais, M; Im, Yong-Taek, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.21, no.10, pp.1534 - 1540, 2007-10

6652
Instability of streaky structure in a Blasius boundary layer

Katasonov, MM; Park, SH; Sung, Hyung Jin; Kozlov, VV, EXPERIMENTS IN FLUIDS, v.38, pp.363 - 371, 2005-03

6653
INSTANTANEOUS FREQUENCY OF A TRANSIENT MECHANICAL SIGNATURE AND ITS ESTIMATION BY A MOVING WINDOW - APPLICABILITY AND PHYSICAL INTERPRETATION

Kim, Yang-Hann; LIM, BD, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, v.8, no.4, pp.381 - 394, 1994-07

6654
Instantaneous Impact Point Guidance Considering Uncertainty in Engine Cut-off Time

Jo, Byeong-Un; Ahn, Jaemyung; Roh, Woong-Rae, JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, v.43, no.2, pp.373 - 382, 2020-02

6655
Instantaneous Impact Point Prediction Using the Response-Surface Method

Ahn, Jaemyung; Seo, Jeongjae, JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, v.36, no.4, pp.958 - 966, 2013-07

6656
Intake air strategy for low HC and CO emissions in dual-fuel (CNG-diesel) premixed charge compression ignition engine

Shim, Euijoon; Park, Hyunwook; Bae, Choongsik, APPLIED ENERGY, v.225, pp.1068 - 1077, 2018-09

6657
Integer Linear Program Approach for Evacuation of Disaster Victims with Different Urgency Levels

Hoon Oh, B.; Kim, K.; Choi, Han-Lim; Hwang, I., IFAC-PapersOnLine, v.50, no.1, pp.15018 - 15023, 2017-07

6658
Integral Approach for Reproduction of Virtual Sound Source Surrounded by Loudspeaker Array

Choi, Jung-Woo; Kim, Yang-Hann, IEEE TRANSACTIONS ON AUDIO SPEECH AND LANGUAGE PROCESSING, v.20, no.7, pp.1976 - 1989, 2012-09

6659
Integral sliding mode controller for precise manoeuvring of autonomous underwater vehicle in the presence of unknown environmental disturbances

Kim, Minsung; Joe, Hangil; Kim, Jinwhan; Yu, Son-cheol, INTERNATIONAL JOURNAL OF CONTROL, v.88, no.10, pp.2055 - 2065, 2015-10

6660
Integrated allele-specific polymerase chain reaction-capillary electrophoresis microdevice for single nucleotide polymorphism genotyping

Choi, Jong-Young; Kim, Yong-Tae; Ahn, Jin-Woo; Kim, Kwan-Suk; Gweon, Dae-Gab; Seo, Tae-Seok, BIOSENSORS & BIOELECTRONICS, v.35, no.1, pp.327 - 334, 2012-05

rss_1.0 rss_2.0 atom_1.0