1 | A virtual experimental approach to evaluate transverse damage behavior of a unidirectional composite considering noncircular fiber cross-sections Jeong, Gyu; Lim, Jae Hyuk; Choi, Chunghyeon; Kim, Sun-Won, COMPOSITE STRUCTURES, v.228, 2019-11 |
2 | (A) study on delamination toughness of carbon fiber/epoxy composite with chopped kevlar fiber and nylon-6 powder reinforcement = 탄소섬유/에폭시 복합 재료의 Kevlar 단 섬유 및 나이론-6입자가 첨가된 층간 파괴 특성에 관한 연구link Park, Byeong-Yeol; 박병열; et al, 한국과학기술원, 1997 |
3 | Analysis of the master curve approach on the fracture toughness properties of SA508 Gr.4N Ni-Mo-Cr low alloy steels for reactor pressure vessels Lee, Ki-Hyoung; Kim, Min-Chul; Lee, Bong-Sang; Wee, Dang-Moon, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.527, no.15, pp.3329 - 3334, 2010-06 |
4 | Effect of microstructure evolution at the interphase boundary on the thermal ageing embrittlement of CF8M cast austenitic stainless steel Kong, Byeong Seo; Shin, Ji Ho; Jeong, Chaewon; Jang, Changheui; Kang, Sung-Sik, INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, v.198, 2022-08 |
5 | Epitaxial 박막/모재 구조물의 수직 균열에 대한 탄성 해석 = Elastic analysis of vertical cracking phenomena in tensile-strained epitaxial film on a substratelink 이새봄; Lee, Sae-Bom; et al, 한국과학기술원, 2006 |
6 | Evaluation of mechanical properties on inconel 82/182 dissimilar metal welds and FEA = 인코넬 82/182 이종금속 용접부의 기계물성 평가 및 유한요소 해석link Lee, Joung-Hoon; 이정훈; et al, 한국과학기술원, 2007 |
7 | Fracture fingerprint of polycrystalline C3N nanosheets: Theoretical basis Bagheri, Babak; Dehaghani, Maryam Zarghami; Safa, Mohammad Esmaeili; Zarrintaj, Payam; Mashhadzadeh, Amin Hamed; Ganjali, Mohammad Reza; Saeb, Mohammad Reza, JOURNAL OF MOLECULAR GRAPHICS & MODELLING, v.106, pp.107899, 2021-07 |
8 | Fracture toughness improvement of polyurethane adhesive joints with chopped glass fibers at cryogenic temperatures Nam, Soohyun; Yu, Youngho; Choi, Ilbeom; Bang, Chang Seon; Lee, Dai Gil, COMPOSITE STRUCTURES, v.107, pp.522 - 527, 2014-01 |
9 | Fracture Toughness Measurement of Adhesively Bonded Joints at Cryogenic Temperatures Yoon, Soon-Ho; Kim, Jin-Gyu; Hwang, Yun-Jeong; Lee, Dai-Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.26, no.7, pp.987 - 1001, 2012 |
10 | High tensile strength of sputter-deposited ZrB2 ceramic thin films measured up to 1016 K Sim, Gi-Dong; Choi, Yong Seok; Lee, Dongwoo; Oh, Kyu Hwan; Vlassak, Joost J., ACTA MATERIALIA, v.113, pp.32 - 40, 2016-07 |
11 | Improvement of cryogenic performance of polyurethane adhesive joints with chopped glass fibers = 유리 단 섬유 보강을 통한 폴리우레탄 접착 조인트의 극저온 성능 향상에 관한 연구link Nam, Soohyun; 남수현; et al, 한국과학기술원, 2015 |
12 | Improvement of the fracture toughness of adhesively bonded stainless steel joints with aramid fibers at cryogenic temperatures Kim, Jin-Gyu; Hwang, Yun-Jeong; Yoon, Soon-Ho; Lee, Dai-Gil, COMPOSITE STRUCTURES, v.94, no.9, pp.2982 - 2989, 2012-09 |
13 | Interfacial fracture analysis of adhesive-bonded joints Kim W.-S.; Lee, Jungju, ADVANCED MATERIALS RESEARCH, v.33-37, no.0, pp.327 - 332, 2008 |
14 | Investigation of Single Pass Welding of Thick AH36 Steel Plates in a Square Groove Butt Joint Configuration During AC-GMAW Ikram, Adeel; Raza, Ahmad; Chung, Hyun, 대한용접접합학회지, v.38, no.3, pp.254 - 262, 2020 |
15 | Mechanical Properties of Chemical-Vapor-Deposited Silicon Carbide using a Nanoindentation Technique 김정호; 이현근; 박지연; 김원주; 김도경, 한국세라믹학회지, v.45, no.9, pp.518 - 523, 2008-09 |
16 | Microstructure and mechanical properties of WC-10Co cemented carbides sintered from nanocrystalline spray conversion processed powders Cha, SI; Kim, BK; Hong, Soon-Hyung, RARE METALS, v.21, pp.130 - 135, 2002-07 |
17 | Puncture fracture in an aluminum beverage can Yoon, Jeong Whan; Cardoso, Rui P. R.; Dick, Robert E., INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, v.37, no.2, pp.150 - 160, 2010-02 |
18 | SA106 Gr.C 배관재의 파괴인성치에 미치는 동적변형시효의 영향 = Effect of dynamic strain aging on fracture toughness fo SA106 Gr.C piping steellink 김대진; Kim, Dae-Jin; et al, 한국과학기술원, 1997 |
19 | SA508 Gr.3 강의 천이영역 파괴특성에 미치는 응력상태의 영향 = Effect of stress state on the fracture behavior of SA508 Gr.3 steel in the transition regionlink 김석훈; Kim, Seok-Hun; 황용석; 김인섭; et al, 한국과학기술원, 1998 |
20 | Si 및 C이 첨가된 일방향응고된 TiAl-Nb 합금의 파괴인성 김성웅; 오명훈; 위당문, 대한금속·재료학회지, v.42, no.3, pp.249 - 258, 2004-03 |
21 | Study on fracture behaviors of isotropic nuclear grade graphite = 등방성 원자력급 흑연의 파괴거동에 관한 연구link Kim, Dae-Jong; 김대종; Kim, In-Sup; Jang, Chang-Heui; et al, 한국과학기술원, 2006 |
22 | Studys on the modification of epoxy resin with polydimethylsioxane = 폴리디메틸실록산에 의한 에폭시 변성에 관한 연구link Lee, Sang-Sun; 이상선; et al, 한국과학기술원, 1997 |
23 | 브레이징에 의한 세라믹 접합체에서 계면반응축과 계면강도에 관한 연구 = A study on the interfacial strength and the reation layer of brazed joints in ceramic materialslink 조현춘; Cho, Hyeon-Choon; et al, 한국과학기술원, 1992 |
24 | 브리지 및 원형 멤브레인의 기계적 물성 및 계면파괴인성치 측정 = A measurement of mechanical properties and fracture toughness of bridged and circular membranelink 최우성; Choi, Woo-Sung; et al, 한국과학기술원, 2005 |
25 | 습기조건과 온도조건하에서 EMC의 파괴인성치 측정 = Measurement of fracture toughness of EMC under various moisture and temperature conditionslink 이창우; Lee, Chang-Woo; et al, 한국과학기술원, 1996 |
26 | 접착조인트의 극저온 파괴인성 향상에 관한 연구 = A study on the improvement of fracture toughness of adhesive joints at cryogenic temperatureslink 윤순호; Yoon, Soon-Ho; et al, 한국과학기술원, 2009 |
27 | 크립손상 입은 304 스테인레스강의 피로균열 진전 거동 및 파괴인성치에 관한 연구 = A study on the fatigue crack growth behavior and the variation of Jc of the creep-damaged 304 stainless steellink 박병석; Park, Byeong-Seok; et al, 한국과학기술원, 1996 |
28 | 탄화붕소의 소결 거동 및 2차상에 의한 파괴인성 증진에 관한 연구 = A study on the sintering behavior and toughening mechanism of boron carbide ceramicslink 이채현; Lee, Chae-Hyun; et al, 한국과학기술원, 1992 |