DC Field | Value | Language |
---|---|---|
dc.contributor.author | 최홍석 | ko |
dc.contributor.author | 이상호 | ko |
dc.contributor.author | 안동규 | ko |
dc.contributor.author | 양동열 | ko |
dc.contributor.author | 박두섭 | ko |
dc.contributor.author | 채희창 | ko |
dc.date.accessioned | 2013-03-04T19:51:16Z | - |
dc.date.available | 2013-03-04T19:51:16Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2003-12 | - |
dc.identifier.citation | 한국CAD/CAM학회 논문집, v.8, no.4, pp.212 - 221 | - |
dc.identifier.issn | 1226-0606 | - |
dc.identifier.uri | http://hdl.handle.net/10203/83902 | - |
dc.description.abstract | In the rigid-plastic finite element simulation of hot forging processes using hexahedral mesh, remeshing of a flash is important for design and control of the process to obtain desirable defect-free products. The mesh compression method is a remeshing technique which enables the construction of an effective hexahedral mesh in the flash. However, because the mesh is distorted during the compression procedure of the mesh compression method, when it is used in resuming the analysis, it causes discretization error and decreases the conversance rate. Therefore, mesh smoothing is necessary to improve the mesh quality. In this study, several geometric mesh smoothing techniques and optimization techniques are introduced and modified to improve mesh quality. Then, the most adaptive technique is recommended for the mesh compression method. | - |
dc.language | Korean | - |
dc.publisher | 한국CAD/CAM학회 | - |
dc.title | VLM-ST공정의 정밀도 향상을 위한 알고리즘 개발 | - |
dc.title.alternative | Development of Algorithms for Accuracy Improvement in Transfer-Type Variable Lamination Manufacturing Process using Expandable Polystrene Foam | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 8 | - |
dc.citation.issue | 4 | - |
dc.citation.beginningpage | 212 | - |
dc.citation.endingpage | 221 | - |
dc.citation.publicationname | 한국CAD/CAM학회 논문집 | - |
dc.identifier.kciid | ART000998046 | - |
dc.contributor.localauthor | 양동열 | - |
dc.contributor.nonIdAuthor | 최홍석 | - |
dc.contributor.nonIdAuthor | 이상호 | - |
dc.contributor.nonIdAuthor | 안동규 | - |
dc.contributor.nonIdAuthor | 박두섭 | - |
dc.contributor.nonIdAuthor | 채희창 | - |
dc.subject.keywordAuthor | Rapid Prototyping (RP) | - |
dc.subject.keywordAuthor | Variable Lamination Manufacturing | - |
dc.subject.keywordAuthor | Accuracy | - |
dc.subject.keywordAuthor | Offset | - |
dc.subject.keywordAuthor | Overrun | - |
dc.subject.keywordAuthor | Reference shape. 1. P. F. Jacobs | - |
dc.subject.keywordAuthor | Rapid Prototyping (RP) | - |
dc.subject.keywordAuthor | Variable Lamination Manufacturing | - |
dc.subject.keywordAuthor | Accuracy | - |
dc.subject.keywordAuthor | Offset | - |
dc.subject.keywordAuthor | Overrun | - |
dc.subject.keywordAuthor | Reference shape. 1. P. F. Jacobs | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.