VLM-ST 공정의 완전 자동화를 위한 2단계 절단 경로 데이터 생성 방법에 관한 연구Generation of Cutting Path Data for Two Steps of the Cutting Process in Full-Automated VLM-ST

Cited 0 time in webofscience Cited 0 time in scopus
  • Hit : 362
  • Download : 0
DC FieldValueLanguage
dc.contributor.author안동규ko
dc.contributor.author김효찬ko
dc.contributor.author양동열ko
dc.contributor.author박두섭ko
dc.contributor.author채희창ko
dc.contributor.author이상호ko
dc.date.accessioned2013-03-04T18:44:07Z-
dc.date.available2013-03-04T18:44:07Z-
dc.date.created2012-02-06-
dc.date.created2012-02-06-
dc.date.issued2004-01-
dc.identifier.citation한국정밀공학회지, v.21, no.1, pp.140 - 148-
dc.identifier.issn1225-9071-
dc.identifier.urihttp://hdl.handle.net/10203/83679-
dc.description.abstractA novel rapid prototyping (RP) process, a full-automated transfer type variable lamination manufacturing process (Full-automated VLM-ST) has been developed. In the full-automated VLM-ST process, a vacuum chuck and a rectilinear motion system transfer the EPS foam material in the form of the plate with two pilot holes to the rotary supporting stage. The supplied material is then cut into an automated unit shape layer (AUSL) with a desired width, a desired length, a desired slope on the side surface, and a pair of reference shapes, which is called the guide shape (GS)’, including two pilot holes in accordance with CAD data through cutting in two steps using a four-axis synchronized hotwire cutter. Then, each AUSL is stacked by setting each AUSL with two pilot holes in the building plate with two pilot pins, and subsequently, adhesive is applied onto the top surface of the stacked AUSL by a bonding roller and pressure is simultaneously given to the bottom surface of the stacked AUSL. Finally, three-dimensional shapes are rapidly and automatically fabricated. This paper describes the method to generate guide shapes in AUSL data for the full-automated VLM-ST process. In order to examine the applicability of the method to generate guide shapes, three-dimensional shapes, such as a piston shape and a human head shape, are fabricated from the full-automated VLM-ST apparatus.-
dc.languageKorean-
dc.publisher한국정밀공학회-
dc.titleVLM-ST 공정의 완전 자동화를 위한 2단계 절단 경로 데이터 생성 방법에 관한 연구-
dc.title.alternativeGeneration of Cutting Path Data for Two Steps of the Cutting Process in Full-Automated VLM-ST-
dc.typeArticle-
dc.type.rimsART-
dc.citation.volume21-
dc.citation.issue1-
dc.citation.beginningpage140-
dc.citation.endingpage148-
dc.citation.publicationname한국정밀공학회지-
dc.identifier.kciidART001098717-
dc.contributor.localauthor양동열-
dc.contributor.nonIdAuthor안동규-
dc.contributor.nonIdAuthor김효찬-
dc.contributor.nonIdAuthor박두섭-
dc.contributor.nonIdAuthor채희창-
dc.contributor.nonIdAuthor이상호-
dc.subject.keywordAuthorRapid Prototyping(쾌속조형)-
dc.subject.keywordAuthorVariable Lamination Manufacturing(가변 적층 쾌속조형)-
dc.subject.keywordAuthorAutomated Unit Shape Layer(AUSL-
dc.subject.keywordAuthor자동화용 단위 형상 층)-
dc.subject.keywordAuthorGuide Shape(GS-
dc.subject.keywordAuthor안내 형상)-
dc.subject.keywordAuthorRapid Prototyping(쾌속조형)-
dc.subject.keywordAuthorVariable Lamination Manufacturing(가변 적층 쾌속조형)-
dc.subject.keywordAuthorAutomated Unit Shape Layer(AUSL-
dc.subject.keywordAuthor자동화용 단위 형상 층)-
dc.subject.keywordAuthorGuide Shape(GS-
dc.subject.keywordAuthor안내 형상)-
Appears in Collection
ME-Journal Papers(저널논문)
Files in This Item
There are no files associated with this item.

qr_code

  • mendeley

    citeulike


rss_1.0 rss_2.0 atom_1.0