완전자동화된 단속적 재료 공급식 가변적층 쾌속조형공정 및 장치 개발에 관한 연구Investigation Into the Development of Automatic VLM-ST(VLM-STA) Process and Its Apparatus

Cited 0 time in webofscience Cited 0 time in scopus
  • Hit : 392
  • Download : 0
DC FieldValueLanguage
dc.contributor.author양동열ko
dc.contributor.author안동규ko
dc.contributor.author이상호ko
dc.contributor.author김효찬ko
dc.contributor.author박승교ko
dc.date.accessioned2013-03-04T17:59:32Z-
dc.date.available2013-03-04T17:59:32Z-
dc.date.created2012-02-06-
dc.date.created2012-02-06-
dc.date.issued2004-04-
dc.identifier.citation한국정밀공학회지, v.21, no.4, pp.109 - 119-
dc.identifier.issn1225-9071-
dc.identifier.urihttp://hdl.handle.net/10203/83539-
dc.description.abstractRapid prototyping (RP) technologies have been widely used to reduce the lead-time and development cost of new products. VLM-ST process has been developed to overcome the currently developed RP technologies such as a large building time, a high building cost, an additional post-processing and a large apparatus cost.VLM-ST process requires an additional human interaction due to the manual stacking and bonding. Hence, building time, building cost and the part quality are dependent on the skill of labor. A novel RP process, fully automated VLM-ST process (VLM-STA), has been developed to improve building efficiency of the process and the human dependency of the part. The objective of this work is to propose a VLM-STA process and to develop an apparatus for implementation of the process. VLM-STA process and its apparatus have various technical novelties such as two step cutting using a rotating table, an automatic stacking method using two pilot holes and two reference shapes, a concept of automatic unit shape layer (AUSL), and an automatic bonding using the bonding roller and building magazine.In order to examine the efficiency and the applicability of the proposed process, various three-dimensional shapes, such as a piston, a human head shape and a human bust shape, were fabricated on the apparatus.-
dc.languageKorean-
dc.publisher한국정밀공학회-
dc.title완전자동화된 단속적 재료 공급식 가변적층 쾌속조형공정 및 장치 개발에 관한 연구-
dc.title.alternativeInvestigation Into the Development of Automatic VLM-ST(VLM-STA) Process and Its Apparatus-
dc.typeArticle-
dc.type.rimsART-
dc.citation.volume21-
dc.citation.issue4-
dc.citation.beginningpage109-
dc.citation.endingpage119-
dc.citation.publicationname한국정밀공학회지-
dc.identifier.kciidART001098069-
dc.contributor.localauthor양동열-
dc.contributor.nonIdAuthor안동규-
dc.contributor.nonIdAuthor이상호-
dc.contributor.nonIdAuthor김효찬-
dc.contributor.nonIdAuthor박승교-
dc.subject.keywordAuthorRapid prototyping (쾌속조형)-
dc.subject.keywordAuthorVLM-ST(단속형 가변적층쾌속조형공정)-
dc.subject.keywordAuthorFully automated process (전자동 공정)-
dc.subject.keywordAuthorProcess design (공정설계)-
dc.subject.keywordAuthorTwo-step cutting (이단계 절단)-
dc.subject.keywordAuthorTwo reference shapes (두개의 적층기준형상)-
dc.subject.keywordAuthorApparatus design(장치설계)-
dc.subject.keywordAuthorThree-dimensional prototypes(3차원 시작품)-
dc.subject.keywordAuthorRapid prototyping (쾌속조형)-
dc.subject.keywordAuthorVLM-ST(단속형 가변적층쾌속조형공정)-
dc.subject.keywordAuthorFully automated process (전자동 공정)-
dc.subject.keywordAuthorProcess design (공정설계)-
dc.subject.keywordAuthorTwo-step cutting (이단계 절단)-
dc.subject.keywordAuthorTwo reference shapes (두개의 적층기준형상)-
dc.subject.keywordAuthorApparatus design(장치설계)-
dc.subject.keywordAuthorThree-dimensional prototypes(3차원 시작품)-
Appears in Collection
ME-Journal Papers(저널논문)
Files in This Item
There are no files associated with this item.

qr_code

  • mendeley

    citeulike


rss_1.0 rss_2.0 atom_1.0