DC Field | Value | Language |
---|---|---|
dc.contributor.author | joosuk lee | ko |
dc.contributor.author | akihiko kimura | ko |
dc.contributor.author | Kim, In Sup | ko |
dc.date.accessioned | 2013-03-03T21:50:57Z | - |
dc.date.available | 2013-03-03T21:50:57Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2003-09 | - |
dc.identifier.citation | JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, v.40, no.9, pp.664 - 671 | - |
dc.identifier.issn | 0022-3131 | - |
dc.identifier.uri | http://hdl.handle.net/10203/80593 | - |
dc.description.abstract | The influence of sigma-phase on mechanical properties in type ER309L stainless steel has been investigated by small punch test. The SA508 cl.3 reactor pressure vessel steel plates were overlay-cladded with the type ER309L welding consumable with different heat input fates. The microstructure of the clad was composed of fcc gamma-austenite, a few percent of bee delta-ferrite and bet sigma-phase. Area fraction of sigma-phase was ranging approximately 2-8% depending on the welding condition. Ductile to brittle transition behavior was observed in the clad, and it was strongly affected by the amount of brittle sigma-phase. When the sigma-phase content was about 8 percent, the transition behavior almost disappeared due to severe cracking. Fracture appearance gradually changed from circumferential to radial cracking not only as test temperature became low but as the volume fraction of sigma-phase increased. The results are manifested in terms of fracture stress of or-phase and sigma-ferrite combined with the roles of radial and circumferential stress by means of the stress analysis of deformed specimen using finite element method. | - |
dc.language | English | - |
dc.publisher | Atomic Energy Soc Japan | - |
dc.subject | DUPLEX STAINLESS-STEEL | - |
dc.subject | AUSTENITE | - |
dc.subject | FRACTURE | - |
dc.title | Application of Small Punch Test to Evaluate Sigma-Phase Embrittlement of Pressure Vessel Cladding Material | - |
dc.type | Article | - |
dc.identifier.wosid | 000186404700004 | - |
dc.identifier.scopusid | 2-s2.0-0242523975 | - |
dc.type.rims | ART | - |
dc.citation.volume | 40 | - |
dc.citation.issue | 9 | - |
dc.citation.beginningpage | 664 | - |
dc.citation.endingpage | 671 | - |
dc.citation.publicationname | JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY | - |
dc.contributor.nonIdAuthor | joosuk lee | - |
dc.contributor.nonIdAuthor | akihiko kimura | - |
dc.type.journalArticle | Article | - |
dc.subject.keywordAuthor | sigma phase | - |
dc.subject.keywordAuthor | cladding | - |
dc.subject.keywordAuthor | delta ferrite | - |
dc.subject.keywordAuthor | small punch test | - |
dc.subject.keywordAuthor | finite element method | - |
dc.subject.keywordAuthor | stress analysis | - |
dc.subject.keywordPlus | DUPLEX STAINLESS-STEEL | - |
dc.subject.keywordPlus | AUSTENITE | - |
dc.subject.keywordPlus | FRACTURE | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.