DC Field | Value | Language |
---|---|---|
dc.contributor.author | Lee, Dai Gil | ko |
dc.contributor.author | Bang, KG | ko |
dc.contributor.author | Choi, JK | ko |
dc.date.accessioned | 2013-02-28T03:13:39Z | - |
dc.date.available | 2013-02-28T03:13:39Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2000 | - |
dc.identifier.citation | JOURNAL OF COMPOSITE MATERIALS, v.34, no.9, pp.770 - 790 | - |
dc.identifier.issn | 0021-9983 | - |
dc.identifier.uri | http://hdl.handle.net/10203/72469 | - |
dc.description.abstract | A composite pressing roller for continuous thin polymer film processing and paper manufacturing was designed and manufactured. During thin polymer film processing , films are vulnerable to damage due to the inertia elf pressing rollers especially during the start and stop periods. Therefore, pressing rollers must have low rotational inertia and high bending stiffness for uniform film thickness. In this work, the pressing roller was designed and manufactured with high modulus carbon fiber composite material to exploit the high specific stiffness of composite material. The optimal stacking sequence of the composite pressing roller and the thickness of the rubber coating layer on the composite pressing roller were calculated using FEM analysis to give uniform pressure along the axial length of the pressing roller. Then the performance of the manufactured composite pressing roller was experimentally evaluated. | - |
dc.language | English | - |
dc.publisher | TECHNOMIC PUBL CO INC | - |
dc.subject | FIBER-EPOXY COMPOSITE | - |
dc.subject | CARBON | - |
dc.title | Development of composite pressing rollers for thin film processing | - |
dc.type | Article | - |
dc.identifier.wosid | 000086943900003 | - |
dc.identifier.scopusid | 2-s2.0-0033734256 | - |
dc.type.rims | ART | - |
dc.citation.volume | 34 | - |
dc.citation.issue | 9 | - |
dc.citation.beginningpage | 770 | - |
dc.citation.endingpage | 790 | - |
dc.citation.publicationname | JOURNAL OF COMPOSITE MATERIALS | - |
dc.contributor.localauthor | Lee, Dai Gil | - |
dc.contributor.nonIdAuthor | Bang, KG | - |
dc.contributor.nonIdAuthor | Choi, JK | - |
dc.type.journalArticle | Article | - |
dc.subject.keywordAuthor | composite roller | - |
dc.subject.keywordAuthor | thin film processing | - |
dc.subject.keywordAuthor | high specific modulus | - |
dc.subject.keywordAuthor | CTE | - |
dc.subject.keywordAuthor | damping | - |
dc.subject.keywordAuthor | natural frequency | - |
dc.subject.keywordAuthor | mandrel removal | - |
dc.subject.keywordPlus | FIBER-EPOXY COMPOSITE | - |
dc.subject.keywordPlus | CARBON | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.