Browse "College of Engineering(공과대학)" by Type Thesis(Master)

Showing results 4261 to 4280 of 23227

4261
CSG방식을 기초로한 3차원 입체 설계 시스템의 개발 = Development of the CSG-based solid modeling systemlink

박기현; Park, Kee-Hyun; et al, 한국과학기술원, 1989

4262
CsI(Na) 섬광체 박막의 광 발생 특성에 관한 연구 = A study on the characteristics of light output In CsI(Na) scintillating thin filmlink

이경수; Lee, Kyung-Soo; 김도경; 배병수; et al, 한국과학기술원, 1998

4263
CTEM 및 CCTEM cell의 TEM 파 해석 = TEM wave analysis of CTEM and CCTEM cellslink

김현수; Kim, Hyunsoo; et al, 한국과학기술원, 2015

4264
Cu 가 도우프된 CdTe 소결막의 전기적 성질 = Electrical properties of Cu-doped CdTe sintered filmslink

전영권; Jun, Young-Kwon; et al, 한국과학기술원, 1985

4265
Cu 기판을 이용한 YBCO 초전도체 선재의 제작과 분석 = Fabrication and characterization of screen-printed YBCO superconductors on Cu plateslink

황현석; Hwang, Hyun-Seok; et al, 한국과학기술원, 2003

4266
Cu 기판을 이용한 YBCO 초전도체 제조에서의 CuO 생성 제어 = CuO formation control in Cu-free synthesis of screen-printed YBCO superconductor on Cu plateslink

김영하; Kim, Young-Ha; et al, 한국과학기술원, 2005

4267
Cu 확산 방지용 TiN의 stuffing 효과에 관한 연구 = A study on the effect of TiN stuffing for Cu diffusion barrierlink

황용섭; Hwang, Yong-Sup; et al, 한국과학기술원, 1998

4268
Cu-$Al_2O_3$ 분산합금에서 $Al_2O_3$가 합금의 재결정 온도와 기계적 및 전기적 성질에 미치는 영향 = The effect of alumina on the recrystallization behaviors and the mechanical properites of the alumina dispersed copper alloyslink

이재훈; Lee, Jae-Hoon; et al, 한국과학기술원, 1985

4269
Cu-1.35Ni-0.32Si-0.036P 합금의 석출과정의 속도론적 연구 = Precipitation kinetics in a Cu-1.35Ni-0.32Si-0.036P alloylink

성태연; Seong, Tae-Yeon; 김영길; 임호빈; et al, 한국과학기술원, 1985

4270
Cu-10%Sn 계 소결합금의 칫수팽창기구와 혼합도에 의한 칫수팽창에 대한 연구 = The dimensional change during sintering of Cu-10w/o Sn the possible mechanism and effect of mixednesslink

정영훈; Chung, Young-Hoon; et al, 한국과학기술원, 1977

4271
Cu-10wt%Sn 성형체의 소결중 액상유동에 미치는 성형밀도의 영향 = Effect of green density on flow behavior of Sn melt during sintering of Cu-Sn compactslink

김정우; Kim, Jeoung-Woo; et al, 한국과학기술원, 1984

4272
Cu-10wt%Sn 합금의 소결에서 가열 중 미세조직의 변화 = Microstructural changes during heating in sintering of Cu-10wt%Sn alloyslink

엄창범; Eom, Chang-Beom; et al, 한국과학기술원, 1983

4273
Cu-25Ni 합금의 cyclic creep시 strain burst 현상에 관한 연구 = Investigation of the strain burst phenomenon of Cu-25Ni alloy due to cyclic creep deformationlink

류재화; Ryu, Jae-Hwa; et al, 한국과학기술원, 1985

4274
Cu-30%Sn 합금 분말로부터 제조된 청동함유 베어링의 성질에 관한 연구 = Properties of bronze oilless bearings made from Cu-30% Sn prealloyed powderlink

은광용; Eun, Kwang-Yong; et al, 한국과학기술원, 1977

4275
Cu-4∼7%Ni-3%Al 합금에서 냉간압연율이 기계적 특성 및 석출에 미치는 영향 = Effects of cold reduction ratios on mechanical properties and precipitation phenomena in Cu-4∼7%Ni-3%Al alloyslink

조영래; Cho, Young-Rae; et al, 한국과학기술원, 1986

4276
Cu-Ag core-shell nanowire transparent conducting film with enhanced oxidation stability = 투명전극용 Cu-Ag 코어-쉘 금속 나노와이어의 합성 및 산화 저항성 향상에 관한 연구link

Jung, Sulgi; Lee, Hyuck Mo; et al, 한국과학기술원, 2018

4277
Cu-Ag-Co계에서 불연속석출에 미치는 외부응력의 영향 = The effect of external stress on discontinuous precipitation in Cu-Ag-Co alloylink

염승진; Yeom, Seung-Jin; et al, 한국과학기술원, 1990

4278
Cu-epoxy 계의 접착력에 관한 연구 = A study on the adhesion of Cu-epoxy systemlink

최광성; Choi, Kwang-Seong; et al, 한국과학기술원, 1995

4279
Cu-In-Ga 전구체 위에 $Ga_2Se_3$ 층을 적용하여 제조된 $Cu(In,Ga)Se_2$ 박막의 Ga 분포 변화 연구 = Ga distribution in $Cu(In,Ga)Se_2$ thin film prepared by selenization of co-sputtered Cu-In-Ga precursor with $Ga_2Se_3$ layerlink

정광선; Jung, Gwang-Sun; et al, 한국과학기술원, 2010

4280
Cu-Ni 합금계에서 열역학적 인자가 static 및 cyclic creep 거동에 미치는 영향 = The effect of thermodynamic factor on static and cyclic creep behavior in Cu-Ni alloylink

주세돈; Choo, Se-Don; 남수우; 유진; et al, 한국과학기술원, 1986

rss_1.0 rss_2.0 atom_1.0