Browse "College of Engineering(공과대학)" by Type Thesis(Ph.D)

Showing results 10492 to 10511 of 10596

10492
하모닉 드라이브용 복합재료 플렉스플라인에 관한 연구 : 설계, 제조 및 평가 = A study on the composite flexspline for a harmonic drive : design, manufacturing and evaluationlink

정광섭; Jeong, Kwang-Seop; et al, 한국과학기술원, 1995

10493
하모닉 웨이브릿 변환을 이용한 SASW시험에서의 위상속도 결정에 관한 연구 = Determination of phase velocities for SASW mthod using hrmonic wvelet tansformlink

박형춘; Park, Hyung-Choon; et al, 한국과학기술원, 2001

10494
하모닉 웨이블렛 변환을 이용한 비정상상태 진동파워의 시간-주파수 해석 = Time-frequency analysis of non-stationary vibration power by harmonic wavelet transformlink

허용화; Heo, Yong Hwa; et al, 한국과학기술원, 2015

10495
하이드라진 추력기 성능에 관한 실험 및 수치적 연구 = Experimantal and numerical study for hydrazine thruster performancelink

한동인; Han, Dong-In; et al, 한국과학기술원, 2010

10496
하이드로포밍 공정에 있어서 신경회로망을 이용한 성형압력 추정에 관한 연구 = Estimation of forming pressure for hydroforming processes using a neural networklink

현봉섭; Hyun, Bong-Sup; et al, 한국과학기술원, 1993

10497
하이브리도마 세포의 고농도 연속배양을 통한 단일 클론 항체의 생산 = Continuous cultures of high density hybridoma cells for the production of monoclonal antibodieslink

오덕재; Oh, Duk-Jae; et al, 한국과학기술원, 1992

10498
하이브리드 구동 이족 로봇을 위한 제약 조건이 낮은 보행 알고리즘 = Under-constrained walking algorithm for hybrid actuated biped robotlink

김동현; Kim, Donghyun; 김경수; et al, 한국과학기술원, 2022

10499
하이브리드 방식을 이용한 고효율, 고품위 공구경로생성 = Tool path generation using a hybrid method for high performance and high quality machininglink

이성근; Lee, Sung-Gun; et al, 한국과학기술원, 2007

10500
하이브리드 방식의 절삭력 평준화를 통한 CNC 엔드 밀링에서의 공구 마모 모니터링 시스템에 관한 연구 = A study on tool state monitoring system for tool wear in CNC end milling using hybrid approach to cutting force regulationlink

이강재; Lee, Kang-Jae; et al, 한국과학기술원, 2005

10501
하중종속기저와 미분기저를 이용한 변형다물체 시스템의 동적해석 = Dynamic analysis of deformable multibody system using load dependent bases and derivative baseslink

이학수; Lee, Hak-Soo; et al, 한국과학기술원, 1994

10502
한국 엔지니어링 산업의 기술발전과정 분석 = A Korean model of technology development patterns in engineering industrylink

홍사균; Hong, Sa-Kyun; et al, 한국과학기술원, 1999

10503
한국어 정보검색에서 외래어와 영어로 인한 단어불일치문제의 해결 = A resolution of word mismatch problem caused by foreign word transliterations and english words in Korean information retrievallink

강병주; Kang, Byung-Ju; et al, 한국과학기술원, 2001

10504
한국어에서 부분 구문 분석 규칙의 자동 추출 = Automatic partial parsing rule acquisition for Koreanlink

최명석; Choi, Myung-Seok; 최기선; 김길창; et al, 한국과학기술원, 2005

10505
한글 문헌를 위한 확률적 자동색인 모델 연구 = A probabilistic approach to automatic indexing of Korean textslink

박혁로; Park, Hyouk-Ro; et al, 한국과학기술원, 1997

10506
합금 원소(Mo, W)가 25%Cr 이상 스테인리스강의 국부부식과 시그마 상 형성에 미치는 영향 및 Fe, Cr, Fe-25Cr 합금의 부동태 피막의 전자적 특성 = Effects of alloying elements (Mo, W) on the localized corrosion and sigma phase formation of 25%Cr duplex stainless steels and electronic properties of passive films on Fe, Cr and Fe-25Cr alloyslink

김준식; Kim, Joon-Shick; et al, 한국과학기술원, 1998

10507
항공기 생존성 향상을 위한 후방동체 온도 저감 및 IR 신호 연구 = Investigation of ir signature and temperature reduction of the rear fuselage for an aircraft survivabilitylink

이경주; Yi, Kyung-joo; et al, 한국과학기술원, 2014

10508
항공기 익형 공력특성 향상을 위한 유동제어 기법에 관한 수치적 연구 = Numerical study about a flow control mechanism for the enhancement of aerodynamic characteristics of 2-D airfoilslink

최성윤; Choi, Sung-Yoon; et al, 한국과학기술원, 2008

10509
항공용 다축김발 광학장비내 점탄성 방진구의 동적매개변수 식별에 관한 연구 = (A) study on dynamic parameters identification of elastomeric isolator in the aerial EO equipment with multi-axis gimballink

김상원; 이익진; et al, 한국과학기술원, 2020

10510
항공우주시스템용 직접 NaBH4/H2O2 연료전지의 개발 및 검증 = Development and validation of direct NaBH4/H2O2 fuel cell for aerospace systemlink

오택현; Oh, Taek-Hyun; et al, 한국과학기술원, 2013

10511
해밀토니안의 시간 불연속 변분적분기와 구성방정식의 2차 정확도 적분법을 이용한 탄소성 응력파 해석 = Analysis of elasto-plastic stress waves by a time discontinuous variational integrator of Hamiltonian with a second-order integration scheme of the constitutive modellink

조상순; Cho, Sang-Soon; et al, 한국과학기술원, 2008

rss_1.0 rss_2.0 atom_1.0