Fabrication and characterization of low temperature poly-Si TFT from LPCVD a-SiLPCVD a-Si을 이용한 저온 Poly-Si 박막트랜지스터의 제조 및 특성 평가에 관한 연구

Cited 0 time in webofscience Cited 0 time in scopus
  • Hit : 623
  • Download : 0
DC FieldValueLanguage
dc.contributor.advisorIm, Ho-Bin-
dc.contributor.advisor임호빈-
dc.contributor.authorPark, Jin-Won-
dc.contributor.author박진원-
dc.date.accessioned2011-12-15T01:01:33Z-
dc.date.available2011-12-15T01:01:33Z-
dc.date.issued1994-
dc.identifier.urihttp://library.kaist.ac.kr/search/detail/view.do?bibCtrlNo=69007&flag=dissertation-
dc.identifier.urihttp://hdl.handle.net/10203/50094-
dc.description학위논문(박사) - 한국과학기술원 : 재료공학과, 1994.2, [ vi, 160 p. ]-
dc.description.abstractFluorine ion implantation into a channel layer has been introduced, as an alternative method to improve the characteristics of low temperature poly-Si thin film transistors from LPCVD a-Si, and the capacitance-voltage characteristics of poly-Si TFT through the direct measurement with TFT structure have been also presented. Poly-Si films used as a channel layer were prepared by the solid phase crystallization (SPC) of LPCVD a-Si at $600\,^\circ\!C$ in $N_2$ atmosphere. In order to find out the optimum deposition condition of a-Si film, the deposition temperature was varied from 520 to $580\,^\circ\!C$ at a fixed pressure of 500 mtorr, using the mixture of $SiH_4$ and $H_2$ as a source gas. Amorphous Si films were completely crystallized after 2 h annealing. As the deposition temperature increased, the grain size of recrystallized poly-Si films increased first and reached the maximum value of about $3000\mbox{\AA}$ at $540\,^\circ\!C$ and then decreased gradually. Using these films, n- and p-ch poly-Si TFTs were fabricated on thermally oxidized Si substrates. The device performance was mainly dependent on the grain size of recrystallized poly-Si films. The device in a-Si films deposited at $540\,^\circ\!C$ exhibits the highest performance. After hydrogenation by PECVD silicon nitride layer, the characteristics of n- and p-ch TFT were much more improved. Especially, the maximum field effect mobility increased from about 32 to $48 cm^2/V \cdot \sec$ for n-ch and from about 30 to $35 cm^2/V \cdot \sec$ for p-ch TFT. To investigate the effects of $F^+$ implantation into a-Si films on the poly-Si TFT characteristics, first the recrystallization behavior of the $F^+$-implanted a-Si films was examined by XRD, TEM, and Raman spectroscopy. The grain size of Si films increased from about 0.3 to about $2.3 \mu{m}$ with increasing $F^+$ dose. The grain size enhancement was more effective, when the projection range of fluorine ion was placed near the Si/$SiO_2$ interface. Thi...eng
dc.languageeng-
dc.publisher한국과학기술원-
dc.subjectLPCVD.-
dc.titleFabrication and characterization of low temperature poly-Si TFT from LPCVD a-Si-
dc.title.alternativeLPCVD a-Si을 이용한 저온 Poly-Si 박막트랜지스터의 제조 및 특성 평가에 관한 연구-
dc.typeThesis(Ph.D)-
dc.identifier.CNRN69007/325007-
dc.description.department한국과학기술원 : 재료공학과, -
dc.identifier.uid000825127-
dc.contributor.localauthorPark, Jin-Won-
dc.contributor.localauthor박진원-
Appears in Collection
MS-Theses_Ph.D.(박사논문)
Files in This Item
There are no files associated with this item.

qr_code

  • mendeley

    citeulike


rss_1.0 rss_2.0 atom_1.0