Browse "MS-Theses_Ph.D.(박사논문) " by Type Thesis(Ph.D)

Showing results 1230 to 1249 of 1285

1230
타이타늄실리사이드 박막의 응집현상과 응력의 영향에 관한 연구 = Study on the agglomeration of TiSi2 thin film and stress effectlink

나종주; Rha, Jong-Joo; et al, 한국과학기술원, 1997

1231
탄소 및 질소가 첨가된 TiAl 금속간화합물의 미세조직과 기계적 성질 = Microstructure and deformation of TiAl intermetallic compound added with carbon and nitrogenlink

윤주환; Yun, Ju-Hwan; et al, 한국과학기술원, 2000

1232
탄소나노튜브-Polyelectrolyte 현탁액 내의 할로겐화 나트륨이 Composite 막 형성에 미치는 영향 = The effects of sodium halide in the carbon nanotube-polyelectrolyte suspension on composite film formationlink

이계웅; Lee, Kye-Ung; et al, 한국과학기술원, 2008

1233
탄소나노튜브의 저온 성장과 전계전자방출 특성 = Low temperature growth and field electron emission characteristics of carbon nanotubeslink

김재명; Kim, Jae-Myung; et al, 한국과학기술원, 2002

1234
탄소를 함유한 Mn-Al 합금의 구조 및 상변태에 관한 연구 = Crystal structure and phase transformation of C-doped Mn-Al alloyslink

이종탁; Lee, Chong-Tak; et al, 한국과학기술원, 1992

1235
탄화규소 휘스카 강화 알루미나 복합재의 강도해석 및 파괴거동에 관한 연구 = A study on the strength analysis and the fracture behaviour of SiC whisker-reinforced alumina compositelink

백용기; Baek, Yong-Kee; et al, 한국과학기술원, 1988

1236
탄화규소의 액상소결중 미세구조 변화 = Microstructural development of SiC ceramics during liquid phase sinteringlink

장철우; Jang, Cheol-Woo; et al, 한국과학기술원, 2002

1237
탄화붕소계 요업체의 소결거동 및 기계적 특성에 관한 연구 = Sintering behavior and mechanical properties of boron carbide-based ceramicslink

김도경; Kim, Do-Kyung; et al, 한국과학기술원, 1987

1238
탄화붕소의 소결 거동 및 2차상에 의한 파괴인성 증진에 관한 연구 = A study on the sintering behavior and toughening mechanism of boron carbide ceramicslink

이채현; Lee, Chae-Hyun; et al, 한국과학기술원, 1992

1239
탄화수소로부터 열분해카본 증착기구에 대한 연구 = A study on the deposition mechanism of pyrolytic carbonsfrom hydrocarbonslink

제정호; Je, Jung-Ho; et al, 한국과학기술원, 1983

1240
터빈로타 재료의 고온 저주파 피로특성 및 크립-피로 상호작용에 관한 연구 = A study on the high temperature low cycle fatigue properties and creep-fatigue interaction of materials used in turbine rotorslink

이수찬; Lee, Soo-Chan; et al, 한국과학기술원, 1991

1241
텅스텐 박막의 저압화학 증착 기구 및 증착층의 특성에 관한 연구 = A study on the mechanisms of tungsten low pressure chemical vapor deposition and the characteristics of the deposited layerlink

박흥락; Park, Heung-Lak; 천성순; 남수우; et al, 한국과학기술원, 1989

1242
텅스텐 중합금에서 제4원소에 의한 미세조직 변화 = Morphological change of tungsten heavy alloy by a fourth elementlink

박희동; Park, Hee-Dong; et al, 한국과학기술원, 1995

1243
텅스텐 함유 이상 스테인레스강의 고온 취화와 부식 저항성 및 용접성에 관한 연구 = A study on the high temperature embrittlement, corrosion resistance, and weldability of W-containing duplex stainless steelslink

김상범; Kim, Sang-Beom; 백경욱; 김영길; et al, 한국과학기술원, 1998

1244
텅스텐-니켈 합금 액상소결의 주요소결기구 = The essential processes in liquid phase sintering of tungsten-nickel alloylink

권오종; Kwon, Oh-Jong; et al, 한국과학기술원, 1980

1245
텅스텐이 Fe-29Cr 초내식성 페라이트 스테인리스강의 부동태 및 금속간상의 형성 속도론에 미치는 영향 = Effects of tungsten on the passivity and formation kinetics of intermetallic phases of Fe-29Cr superferritic stainless steelslink

안명규; Ahn, Myung-Kyu; et al, 한국과학기술원, 1998

1246
투명전극을 이용한 소결체 CdS/CdTe 태양전지의 제조 및 광전압 특성 = Preparation and photovoltaic properties of sintered CdS/CdTe solar cells with TCO filmslink

김혜동; Kim, Hye-Dong; et al, 한국과학기술원, 1995

1247
튜브형 주물과 금형사이의 시간에 따라 변화하는 계면열전달계수의 측정과 응고 형태가 계면열전달계수에 미치는 영향 = Measurement of time-varying interfacial heat transfer coefficient between tube-shaped casting and metal mold and the effect of solidification type on the interfacial heat transfer coefficientlink

김태규; Kim, Tae-Gyu; et al, 한국과학기술원, 1997

1248
티타늄 금속복합재료에서 고상-기상 반응공정에 의한 분산강화입자의 in-situ 생성과 성장 = In-situ formation and growth of particulate reinforcements in titanium metal matrix composite by solid-gas reaction processinglink

김용진; Kim, Yong-Jin; et al, 한국과학기술원, 2000

1249
티타늄 첨가 동합금을 Brazing filler 로 사용한 질화규소와 철강의 접합기구 = Bonding mechanism between $Si_3N_4$ and steel using titanium added copper alloy as a brazing fillerlink

김대훈; Kim, Dae-Hun; 천성순; 황선효; et al, 한국과학기술원, 1990

rss_1.0 rss_2.0 atom_1.0