Browse "MS-Theses_Ph.D.(박사논문) " by Type Thesis(Ph.D)

Showing results 1005 to 1024 of 1285

1005
레이저 디스플레이용 광스캐너의 설계 및 제작에 관한 연구 = A study on the design and fabrication of silicon optical scanner for laser displaylink

이진호; Lee, Jin-Ho; et al, 한국과학기술원, 2003

1006
리드프레임과 EMC의 접착에 관한 연구 = A study on the adhesion of leadframe to EMClink

이호영; Lee, Ho-Young; et al, 한국과학기술원, 1999

1007
리튬 이차 전지용 Tin계 합금 전극의 전기화학적 특성 및 미세 구조적 특성 = Electrochemical and micro-structural properties of tin base alloys as anode materials for lithium secondary batterieslink

최완욱; Choi, Wan-Uk; et al, 한국과학기술원, 2005

1008
리튬 이차전지 음극 소재용 Sn-Co, $Sn(Ge_2S_7)_{0.5}(MgO)_{0.5}$, 그리고 Si-C의 전기화학적 특성 = A study on the electrochemicl properties of Sn-Co, $Sn(Ge_2S_7)_{0.5}(MgO)_{0.5}$, and Si-C ans an anode material for Li ion batterieslink

김기태; Kim, Ki-Tae; et al, 한국과학기술원, 2003

1009
리튬/유황 이차전지용 유황양극의 전극수명 향상에 관한 연구 = A study on the improvement of the cycle life for sulfur cathode in the Li/S secondary batterylink

한상철; Han, Sang-Cheol; et al, 한국과학기술원, 2003

1010
리튬니켈산화물계의 구조 안정성및 전기화학적 특성에 관한 고찰 = The study of the structural stability and electrochemical properties of lithium nickel oxide systemlink

김진균; Kim, Jin-Gyun; et al, 한국과학기술원, 2001

1011
리튬이온 이차전지의 부극활물질용 열분해 탄소 및 이를 코팅한 흑연의 전기화학적 특성에 관한 연구 = Electrochemical characteristics of pyrolytic carbon (PyC) and PyC-coated graphite for active materials of anodes in Li-ion secondary batterieslink

한영수; Han, Young-Soo; et al, 한국과학기술원, 2000

1012
리튬이차전지용 $LiMn_2O_4$ 양극재료의 용량감소 메카니즘에 관한 연구 = The analysis of capacity fading mechanism of $LiMn_2O_4$ cathode material for lithium ion secondary batterieslink

손종태; Son, Jong-Tae; et al, 한국과학기술원, 2004

1013
마이크로웨이브 가열이 질화규소의 치밀화와 상전이에 미치는 영향 = Effect of microwave heating on densification and phase transformation of silicon nitridelink

김윤창; Kim, Yoon-Chang; 김도경; 김종희; et al, 한국과학기술원, 1997

1014
마이크로웨이브 플라즈마 화학증착법에 의한 다이아몬드 박막의 Heteroepitaxy 성장에 관한 연구 = The study on the heteroepitaxial growth of diamond films synthesized by microwave plasma enhanced chemical vapor depositionlink

김윤기; Kim, Yoon-Kee; et al, 한국과학기술원, 1997

1015
마이크로웨이브에 의한 비정질 실리콘의 저온 고상결정화 거동에 관한 연구 = A study on the low-temperature solid phase crystallization behavior of amorphous silicon thin films by microwave heatinglink

이정노; Lee, Jeong-No; et al, 한국과학기술원, 1997

1016
마이크로파 투과성 세라믹의 유전 특성에 관한 연구 = Dielectric properties of ceramics for microwave windows applicationlink

박민규; Park, Min-Kyu; et al, 한국과학기술원, 2006

1017
마이크로파에 의한 $BaTiO_3$계 세라믹스의 소결거동 및 전기적 특성 = Microwave sintering behavior and electronical properties of $BaTiO_3$ ceramicslink

배강; Bai, Kang; et al, 한국과학기술원, 1994

1018
메조포러스 실리카와 Organosilicate 박막의 제조 및 특성 = Fabrication and characteristics of mesoporous silica and organosilicate thin filmslink

정지인; Jung, Ji-In; et al, 한국과학기술원, 2005

1019
메탄슬폰화욕에서 전착된 Sn 계 솔더 합금의 조성과 미세조직 및 솔더물성에 미치는 도금조건의 영향 = Effects of plating condition on composition, morphology, and solder properties of Sn solder alloy systems electrodeposited from methane sulfonate bathlink

서민석; Suh, Min-Suk; et al, 한국과학기술원, 2000

1020
몬테카를로 시뮬레이션을 이용한 열간 단조용 중탄소강의 오스테나이트 결정립 조대화 모사 연구 = Research on austenite grain coarsening of hot forging medium carbon steel using monte carlo simulationlink

김태형; Kim, Tae-Hyung; et al, 한국과학기술원, 2013

1021
무연 및 저연 Sn 계 솔더의 열역학적 합금설계 및 특성평가 = Thermodynamics-aided alloy design and evaluation of Pb-free and low Pb-bearing Sn solder alloy systemslink

윤승욱; Yoon, Seung-Wook; et al, 한국과학기술원, 1998

1022
무연 솔더와 Ni-Cu 합금 UBM 간의 계면 반응 및 신뢰성에 관한 연구 = Study on the reaction and reliability of Ni-Cu alloy UBM with Pb-free solderslink

한훈; Han, Hun; et al, 한국과학기술원, 2005

1023
무연솔더의 크리프에 미세구조와 솔더볼 형상이 미치는 영향에 관한 연구 = Effects of microstructure and solder ball geometry on creep deformation of lead-free solderlink

김성범; Kim, Sung-Bum; et al, 한국과학기술원, 2011

1024
무전해 Ni(P)에 W첨가가 무연 솔더와의 계면 반응 및 기계적 신뢰성에 미치는 영향에 대한 연구 = A study on the effect of W alloying in Ni(P) film on the interfacial reactions and mechanical reliabilities in lead-free solderlink

장동민; Jang, Dong-Min; et al, 한국과학기술원, 2011

rss_1.0 rss_2.0 atom_1.0