Browse "MS-Theses_Ph.D.(박사논문) " by Author Nam, Soo-Woo

Showing results 14 to 41 of 41

14
Lamellar TiAl 합금에서 입계 상변태가 크리프-피로 손상에 미치는 영향 및 수명향상 방안에 관한 연구 = A study on the effect of grain boundary phase transformation on creep-fatigue damage and the life enhancement method in lamellar TiAl alloylink

박영삼; Park, Young-Sam; et al, 한국과학기술원, 2002

15
Lamellar 구조 TiAl합금의 primary 크리프 변형기구에 대한 연구 = A study on the primary creep deformation mechanism of the lamellar TiAl alloyslink

조한서; Cho, Han-Seo; et al, 한국과학기술원, 1999

16
P92강에서 인장 및 압축 유지 크리프-피로 상호 작용에 의한 cavitation mechanism에 관한 연구 = An investigation of cavitation mechanism under tensile and compressive hold creep-fatigue interaction in P92 steellink

백정웅; Baek, Jung-Woong; et al, 한국과학기술원, 2005

17
Ti-1100 및 IMI834 합금에서 최적 크리프-피로 특성을 위한 최적의 미세조직 제어에 관한 연구 = A study on the microstructural control for the optimum creep-fatigue characteristics in the Ti-1100 and IMI834 alloyslink

이덕희; Lee, Duck-Hee; et al, 한국과학기술원, 2000

18
$Ti_2AlNb$ 기지 합금과 TiB 분산강화 복합재료의 크리프 변형기구 천이현상에 관한 연구 = A study on the transition of creep deformation mechanism in $Ti_2AlNb$ alloy and TiB particulate compositelink

양승진; Yang, Seung-Jin; et al, 한국과학기술원, 2004

19
Zircaloy-4 합금의 정적 및 반복응역 크립 거동에 미치는 동적 변형시효의 영향에 관한 연구 = A study on the effect of dynamic strain aging on the static and cyclic creep behavior of zircaloy-4link

안종식; Ahn, Jong-Sik; et al, 한국과학기술원, 1990

20
고강도 Aluminum 합금 용접부의 고온 균열발생에 미치는 천이금속원소의 영향 = Effect of transition alloying element on te hot cracking behavior of high strength Al-Zn-Mg alloy weldmentlink

김환태; Kim, Hwan-Tae; et al, 한국과학기술원, 1996

21
고압의 수소가스 분위기에서의 저주파피로 수명에 Hold time 이 미치는 효과 = effects of hold time on low-cycle fatigue life with or without high pressure hydrogen gaslink

최인식; Choi, In-Sik; et al, 한국과학기술원, 1984

22
고용체 합금에서 Cyclic Creep 변형에 미치는 용질원자의 영향 = A study of the solute effect on cycliccreep of solid solution alloylink

홍경태; Hong, Kyung-Tae; et al, 한국과학기술원, 1986

23
기계적으로 생성된 Vacancy에 의한 순금속의 cycliccreep 가속화 기구에 대한 연구 = (A) study on the cyclic creep acceleration mechanism controlled by the mechanically generated vacancies in pure metalslink

신동혁; Shin, Dong-Hyuk; et al, 한국과학기술원, 1982

24
붕소와 탄소가 단결정용 니켈기 초내열합금의 결함수용성에 미치는 효과 = Effect of boron and carbon on the defect tolerability of a nickel base single crystal superalloylink

김두현; Kim, Doo-Hyun; et al, 한국과학기술원, 2003

25
상용 및 P-doped 304L 스탠레스 강의 크립-피로 거동에 관한 연구 = A study on the creep-fatigue behavior of commercial and P-doped 304L stainless steellink

김중재; Kim, Joong-Jae; et al, 한국과학기술원, 1990

26
상용 및 S-,P-,S-,P-doped Type 304 스텐레스 강에서의 고온입계취성 = High temperature intergranular embrittlement in commercial and S-,P-,S,P-doped type 304 stainless steelslink

홍준화; Hong, Jun-Hwa; et al, 한국과학기술원, 1986

27
석출경화형 Nb-A286 초내열합금에서 온도와 변형량에 따른 저주파 피로 손상기구에 관한 연구 = A study on the damage mechanism under low cycle fatigue with temperature and strain in the precipitate strengthened Nb-A286 superalloylink

노병섭; Rho, Byung-Sup; et al, 한국과학기술원, 2000

28
오스테나이트 스테인리스 Type 347강의 고온 파괴인성에 미치는 탄소 및 질소의 영향 = Effects of carbon and nitrogen on the high temperature fracture toughness of austenitic stainless steel, Type 347link

유완; Yoo, One; et al, 한국과학기술원, 2005

29
오스테나이트계 스테인레스강의 크리프-피로 상호작용시 cavity 소멸을 고려한 수명연장에 관한 연구 = A study on the life extension by the annihilation of cavity in austenitic stainless steel under creep-fatigue interaction conditionlink

최백규; Choi, Baig-Gyu; et al, 한국과학기술원, 1999

30
오스테나이트계 스테인리스강에서 크리프-피로 특성에 영향을 미치는 입계탄화물 석출 및 제어에 관한 연구 = A study on the precipitation mechanism and control of grain boundary carbide affecting the creep-fatigue properties in austenitic stainless steelslink

홍현욱; Hong, Hyun-Uk; et al, 한국과학기술원, 2002

31
유지시간에 따른 응력이완과 히스테리시스 에너지를 이용한 크리프-피로 수명예측 = Creep-fatigue life prediction in terms of stress relaxation and hysteresis loop energy with hold timelink

정창렬; Jeong, Chang-Yeol; et al, 한국과학기술원, 2000

32
유효응력 개념에 기초한 정상상태 및 Transient 크리프 거동에 관한 연구 = A study on the steady and transient creep behavior based on the effective stress conceptlink

이봉상; Lee, Bong-Sang; et al, 한국과학기술원, 1996

33
의탄성 현상의 새로운 해석에 의한 반복 응력 크립 변형 기구에 관한 연구 = A Study on the cyclic creep deformation mechanism in terms of the newly interpreted anelasticitylink

주세돈; Choo, Se-Don; et al, 한국과학기술원, 1992

34
의탄성회복현상으로 해석된 Cyclic creep 변형기구의 규명 = (The) interpretation of cyclic creep deformationmechanism in terms of the anelastic recoverylink

진근찬; Jin, Keun-Chan; et al, 한국과학기술원, 1982

35
인장에서 Hold time을 준 고온 저주파 피로수명에 미치는 크립 공동손상의 영향 = Effects of creep cavitation damage on high temperature low cycle fatigue life with tensile hold timelink

홍진완; Hong, Jin-Wan; et al, 한국과학기술원, 1985

36
입자강화형 타이타니움기 복합재료의 크리프 변형거동과 손상기구에 관한 연구 = A study on the creep deformation behavior and damage mechanism of particleate-reinforced ti based compositelink

이상인; Rhee, Sang-In; et al, 한국과학기술원, 2004

37
전위구조의 비교관찰을 통한 반복응력 크립가속화 기구 및 가속화 임계조건에 관한 연구 = A study on the mechanism and criterion of cyclic creep acceleration interms of dislocation structureslink

이재곤; Lee, Jae-Kon; et al, 한국과학기술원, 1988

38
크립-피로 상호작용시 cavity 손상을 고려한 손상함수의 제안 및 수명예측에 관한 연구 = A study on the damage function and life prediction in terms of cavitational damage for creep-fatigue interaction conditionlink

윤영철; Yoon, Young-Cheol; et al, 한국과학기술원, 1994

39
터빈로타 재료의 고온 저주파 피로특성 및 크립-피로 상호작용에 관한 연구 = A study on the high temperature low cycle fatigue properties and creep-fatigue interaction of materials used in turbine rotorslink

이수찬; Lee, Soo-Chan; et al, 한국과학기술원, 1991

40
텅스텐 박막의 저압화학 증착 기구 및 증착층의 특성에 관한 연구 = A study on the mechanisms of tungsten low pressure chemical vapor deposition and the characteristics of the deposited layerlink

박흥락; Park, Heung-Lak; 천성순; 남수우; et al, 한국과학기술원, 1989

41
피로 Process 영역에 의한 크립 - 피로 상호 작용에 관한 연구 = A study on the creep - fatigue interaction in terms of fatigue process zonelink

오용준; Oh, Yong-Jun; et al, 한국과학기술원, 1991

rss_1.0 rss_2.0 atom_1.0