Browse "MS-Theses_Ph.D.(박사논문) " by Title 

Showing results 141 to 160 of 1309

141
Advanced 9-12% Cr 강의 크리프 파단강도에 미치는 합금원소의 영향 = Effects of alloying elements on the creep rupture strength of advanced 9-12% Cr steelslink

류석현; Ryu, Seog-Hyeon; et al, 한국과학기술원, 1998

142
Ag, Ag-Sn, Ag-Sn-Cu 계의 아말감반응에 관한 연구 = A study on the amalgamation reaction un Ag, Ag-Sn, andAg-Sn-Cu systemlink

이규환; Lee, Kyu-Hwan; 이재영; 신명철; et al, 한국과학기술원, 1986

143
Ag, Cu) 삼원계 단결정에서 강화기구에 관한 연구 = Al-Li-X(Xlink

이병찬; Lee, Byeong-Chan; et al, 한국과학기술원, 1997

144
Ag-Pd-In 합금의 미세구조 및 기계적 성질에 미치는 첨가원소의 영향 = The effects of addition elements on the microstructures and mechanical properties of Ag-Pd-In alloyslink

서용찬; Suh, Yong-Chan; et al, 한국과학기술원, 1998

145
AIAI 304 및 304L 스테인리스강의 입계 석출물이 크립-피로 상호작용에 미치는 영향 = Effects of grain boundary ppt on creep-fatigue interaction in AISI 304 and 304L stainless steellink

이제민; Lee, Je-Min; et al, 한국과학기술원, 1991

146
AISI 304L 스탠레스 상의고온 저주파 피로시험시 피로 거동에 미치는 동적 변형 시효의 영향 = The effects of dynamic strain ageing on the low-cycle fatigue behaviors at high temperature for the AISI 304L stainless steellink

김동제; Kim, Dong-Jee; et al, 한국과학기술원, 1988

147
AISI 316 스테인리스강에서 발생하는 입계 serration에 영향을 미치는 인자 고찰 및 발생 기구 규명 = An investigation of the factors affecting the occurrence of the grain boundary serration and the grain boundary serration mechanism in AISI 316 stainless steellink

김기재; Kim, Ki-Jae; et al, 한국과학기술원, 2004

148
AISI 321 스테인리스강의 입계 탄화물 석출 기구 규명 및 크리프-피로 특성 향상에 관한 연구 = An investigation of the precipitation mechanism of grain boundary carbides and the improvement of the creep-fatigue properties in AISI 321 stainless steellink

민경선; Min, Kyung-Seon; et al, 한국과학기술원, 2003

149
Al - Li - Cu(- Mg) 합금의 석출 현상과 강화 기구에 관한 연구 = Study of the precipitation behavior and strengthening mechanisms in Al - Li - Cu(- Mg) alloyslink

정우상; Jung, Woo-Sang; et al, 한국과학기술원, 1992

150
Al - Zn 합금의 불연속 석출에 미치는 연속 석출및 제3원소의 영향 = The effects of continuous precipitation and third elementon the kinetics of discontinuous precipitation in Al - Zn alloyslink

이호기; Yi, Ho-Gi; et al, 한국과학기술원, 1992

151
Al 하지막이 자기 기록용 CoCr(Pt)Ta/Cr 박막의 자기적 특성과 미세 구조에 미치는 영향에 관한 연구 = Study on the effect of an Al underlayer on the magnetic and microstructural properties of CoCr(Pt)Ta/Cr thin films for magnetic recording medialink

장한성; Chang, Han-Sung; et al, 한국과학기술원, 1998

152
Al-Fe-V-Si/SiC 복합재료의 크??거동을 주관하는 전위 detachment의 온도의존성 = Temperature dependence of the dislocation detachment controlled creep behavior of an Al-Fe-V-Si/SiC compositelink

김인수; Kim, In-Soo; et al, 한국과학기술원, 1995

153
Al-Li-Cu-Mg(-Ag)합금의 석출현상과 δ'상의 강화기구에 관한 연구 = Study of the precipitation behaviors and of the strengthening mechanism of δ' phase in Al-Li-Cu-Mg(-Ag) alloyslink

김제덕; Kim, Je-Deok; et al, 한국과학기술원, 1993

154
Al-Mg 고용체 합금에서 고온 반복크리ㅍ시 응력진폭이 입계변형거동에 미치는 영향에 관한 연구 = A study of effect of stress amplitude on the grain boundary deformation behavior during high temperature cyclic creep in an Al-Mg solid solution alloylink

나상호; Na, Sang-Ho; et al, 한국과학기술원, 1995

155
Al-Mg 고용체 합금에서 고온 정적 및 반복응력 크립 변형시 발생되는 입계 변형 및 입계파괴 거동에 관한 연구 = An investigation of the grain boundary deformation and intergranular fracture during high temperature static and cyclic creep in an Al-Mg solid solution alloylink

이동헌; Lee, Dong-Heon; et al, 한국과학기술원, 1991

156
Al-Zn-Mg 계 합금에서 Mn-Dispersoid 가 기계적 변형에 미치는 영향과 무석출물대가 저주기 피로특성에 미치는 영향 = Effects of Mn-dispersoid on the deformation mechanism and precipitate free zone on the low cycle fatigue of and Al-Zn-Mg alloylink

박동석; Park, Dong-Seok; et al, 한국과학기술원, 1991

157
Al-Zn-Mg 합금에서 응력부식파괴와 부식피로의 기구와 속도론에 대한 연구 = A study on the mechanism and kinetics of stress-corrosion cracking and corrsion-fatigueprodesses of Al-Zn-Mg alloyslink

김홍표; Kim, Hong-Pyo; et al, 한국과학기술원, 1988

158
AL-ZN-MG계 합금의 변형기구에 미치는 Mn-분산상의 영향 = Effects of MN-dispersoid on the deformation mechanism in AL-ZN-MG alloyslink

공병욱; Kong, Byeong-Ook; et al, 한국과학기술원, 1996

159
$Al_2O_3$와 $Y_2O_3$를 첨가한 탄화규소의 소결거동 및 기계적 성질에 관한 연구 = Sintering behavior and mechanical properties of SiC with addition of $Al_2O_3$ and $Y_2O_3$link

이승건; Lee, Seung-Kun; et al, 한국과학기술원, 1995

160
$Al_2O_3-ZrO_2$계에서 $MoO_2$ 첨가에 따른 $ZrO_2$의 상변태와 기계적 성질 = Effect of $MoO_2$ on $ZrO_2$ transformation and mechanical properties of $Al_2O_3-ZrO_2$ compositelink

신유선; Shin, Yu-Seon; et al, 한국과학기술원, 1993

rss_1.0 rss_2.0 atom_1.0