Wavelength filters based on passive and active optical fiber gratings = 수동 및 능동 광섬유 격자를 이용한 파장 필터에 관한 연구

Cited 0 time in webofscience Cited 0 time in scopus
  • Hit : 319
  • Download : 0
DC FieldValueLanguage
dc.contributor.advisorKim, Byoung-Yoon-
dc.contributor.authorPark, Hee-Su-
dc.description학위논문(박사) - 한국과학기술원 : 물리학과, 2002.2, [ iv, 86 p. ]-
dc.description.abstractThis dissertation describes principles, fabrications and characterizations of novel all-fiber wavelength filters based on intermodal coupling in two-mode optical fibers. Two types of devices are demonstrated, which utilize a tilted fiber Bragg grating and a fiber acousto-optic tunable filter, respectively. Their all-fiber configuration consisting of fiber gratings and mode-selective couplers results in the lower loss operation compared to the conventional devices. A technique is demonstrated to measure the phase velocities of the guided modes in various fibers. Mode-selective couplers, key components for the devices based on two-mode fibers, are fabricated using the measured phase velocities. Their operation principle, the fabrication methods, and the characteristics are described. A novel all-fiber add-drop multiplexer is demonstrated by using a tilted Bragg grating written on a two-modefiber and the mode-selective coupler. The effects of the tilt of the fiber Bragg grating are described. And it is shown that an efficient mode conversion is possible by adjusting the tile angle without unwanted mode coupling which causes a loss and an interchannel crosstalk. The device can be made potentially with low loss and low cost, useful for add/drop of a small number of channels in wavelength division multiplexing communication systems. A novel all-fiber wavelength-tunable acousto-optic switch is demonstrated utilizing a fiber acousto-optic tunable filter in the two-mode fiber and a mode-selective coupler. The fiber design parameters are presented to control the wavelength filtering characteristics of the device. The fabricated device has the wide operating bandwidth of > 50 nm thanks to the broad bandwidth of the mode selective coupler. The switching time is several tens of microseconds, and the crosstalk is - 20 dB. The 3 dB bandwidth of the switched signal is varied from 2.5 nm to > 35 nm by using various types of two-mode fibers. A novel all-fiber dynamic optical add...eng
dc.subjectwavelength division multiplexeing-
dc.subjectfiber gratings-
dc.subjectoptical fibers-
dc.subjectoptical communication-
dc.subjectacousto optic devices-
dc.subject음향광학 소자-
dc.subject파장분할 다중화-
dc.subject광섬유 격자-
dc.titleWavelength filters based on passive and active optical fiber gratings = 수동 및 능동 광섬유 격자를 이용한 파장 필터에 관한 연구-
dc.description.department한국과학기술원 : 물리학과, -
dc.contributor.localauthorPark, Hee-Su-
Appears in Collection
Files in This Item
There are no files associated with this item.


  • mendeley


rss_1.0 rss_2.0 atom_1.0