Microballoons: Osmotically-inflated elastomer shells for ultrafast release of encapsulants and mechanical energy

Abstract

Hypothesis: Microcapsules with osmotically-inflated elastic shells exhibit an ultrafast release of encapsulants while mechanically stimulating the microenvironments, akin to popping balloons. Experiments: To prepare elastic shells with uniform thickness and size, monodisperse water-in-oil-in-water (W/O/ W) double-emulsion drops are produced in a capillary microfluidic device. The polydimethylsiloxane (PDMS)containing oil phase is thermally cured to create the elastic shell. The elastic shells are inflated by pumping water into the lumen in hypotonic conditions. The inflated microcapsules produced undergo mechanical compression, and their release properties are studied. Findings: By controlling the osmotic pressure difference, Microballoons are inflated into a diameter of 200 mu m - 316 mu m and shell thickness of 7.8 mu m - 0.7 mu m, respectively. The inflated shell pops due to mechanical failure when subjected to mechanical stress above a certain threshold, resembling a balloon. During popping, the stretched shell rapidly retracts to the original uninflated state, resulting in an ultrafast release of encapsulants from the lumen within a millisecond. This process converts elastic potential energy stored in the shell into mechanical energy with substantial power. The microballoons mechanically stimulate the local environment, leading to the direct and rapid release of encapsulants. This has the potential to improve absorption efficiency.