DC Field | Value | Language |
---|---|---|
dc.contributor.advisor | Paik, Kyung-Wook | - |
dc.contributor.advisor | 백경욱 | - |
dc.contributor.author | KANG, QI | - |
dc.date.accessioned | 2021-05-13T19:38:03Z | - |
dc.date.available | 2021-05-13T19:38:03Z | - |
dc.date.issued | 2020 | - |
dc.identifier.uri | http://library.kaist.ac.kr/search/detail/view.do?bibCtrlNo=925146&flag=dissertation | en_US |
dc.identifier.uri | http://hdl.handle.net/10203/284985 | - |
dc.description | 학위논문(석사) - 한국과학기술원 : 신소재공학과, 2020.8,[vi, 63 p. :] | - |
dc.description.abstract | Recently, trends in the electronic display filed are towards higher resolution and flexibility, as a result, anchoring polymer layer (APL) anisotropic conductive films (ACFs) structures having ultra-fine pitch capability and high tensile strength have been introduced. However, poor interfacial adhesion of APL ACFs can affect reliability of assembly and cause display problems. To improve the interfacial adhesion, interfacial adhesion mechanisms of APL ACFs need investigation. In this study, chemical factor affecting the interfacial adhesion mechanism was studied in terms of thermoplastic polymer types and the curing agent powder amount in APL films. Furthermore, APL ACFs compositions were optimized by deciding whether the optimized curing agent amount should be added into NCF or APL film. No chemical reaction existed in PVDF APL ACFs. The optimized PVDF APL ACFs was PVDF APL film without curing agent. Chemical reactions were observed in Nylon66 and PAN APL ACFs, respectively. Curing agent added into APL films reduced APLs’ tensile strength. Therefore, the optimized PAN APL ACFs and Nylon66 APL ACFs composition was concluded as PAN APL + 2NCFs with 3×C.A, and Nylon66 APL + 2NCFs with 3.5× C.A, respectively. The adhesion strength of the optimized PAN APL ACFs and Nylon66 APL ACFs was improved by 8.4times, and 15.6times, separately. Electrical properties including contact resistance, and short circuit rate were measured. Pressure cooker test (PCT), thermal cycle (TC) test, and 85℃/85% relative humidity (RH) test were performed to evaluate the reliability of the optimized APL ACFs structures. All three optimized APL ACFs structures showed excellent electrical properties and reliability. | - |
dc.language | eng | - |
dc.publisher | 한국과학기술원 | - |
dc.subject | Anisotropic conductive films (ACFs)▼aThermoplastic anchoring polymer layer (APL)▼aUltra-fine pitch▼aInterfacial adhesion mechanism▼aNylon66▼aPAN▼aPVDF | - |
dc.subject | 이방성 도전 필름 (ACFs)▼a열가소성 앵커 폴리머 층 (APL)▼a초 미세 피치▼a계면 접착 메커니즘▼a나일론 66▼aPAN▼aPVDF | - |
dc.title | A study on the interfacial adhesion mechanism of thermoplastic anchoring polymer layer(APL) films and epoxy-based nonconductive film(NCF) for APL ACFs | - |
dc.title.alternative | APL ACF 용 열가소성 앵커링 폴리머 층 (APL) 필름과 에폭시 기반 비전 도성 필름 (NCF)의 계면 접착 메커니즘에 관한 연구 | - |
dc.type | Thesis(Master) | - |
dc.identifier.CNRN | 325007 | - |
dc.description.department | 한국과학기술원 :신소재공학과, | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.