821 | Analysis of laminated anisotropic shell structures by finite element method = 유한 요소법에 의한 복합적층된 이방성 쉘 구조물의 해석link Cho, Chang-Min; 조창민; et al, 한국과학기술원, 1985 |
822 | 수정된 Random vortex method 를 이용한 난류유동의 수치적 해석 = Numerical simulation of turbulent flow behind a bluff body using a modified random vortex methodlink 하지수; Ha, Ji-Soo; et al, 한국과학기술원, 1985 |
823 | 폭발물의 민감도 실험결과의 콤퓨터 수치해석 = Computational analysis of sensitivity of explosives and its comparison with experimentslink 정재화; Jung, Jae-Hwa; et al, 한국과학기술원, 1985 |
824 | 낮은 레이놀즈수를 갖는 익형 뒤의 와류특성에 관한 연구 = Investigation of vortex characteristics behind an airfoil at low reynolds numberlink 윤희권; Yoon, Hee-Kweon; et al, 한국과학기술원, 1985 |
825 | 비점성 박리 모델을 이용한 받음각을 갖는 회전체 주위에서의 유동장 계산 = Calculation of the flow about a body of revolution at incidence using inviscid separated flow modellink 이응호; Lee, Eung-Ho; et al, 한국과학기술원, 1985 |
826 | 응력동결-광탄성법을 이용한 3차원 균열의 응력확대계수 결정 = Photoelastic determination of stress intensity factors in three-dimensional crack using stress freezing methodlink 전재영; Jeon, Jae-Young; et al, 한국과학기술원, 1985 |
827 | 충격파에 의해 폭발물에 일어나는 화학반응 진행모델 = Modeling of reaction buildup process in shocked porous explosiveslink 손창현; Sohn, Chang-Hyun; et al, 한국과학기술원, 1985 |
828 | 광학적 방법에 의한 $K_2SO_4$ 의 부착에 관한 실험적 연구 = An experimental study on the deposition of $K_2SO_4$ using optical methodlink 우성구; Woo, Seong-Gu; et al, 한국과학기술원, 1985 |
829 | 균열면에서의 섬유 방향이 탄소섬유 강화 복합재료의 층간 파괴인성치에 미치는 영향 = Effects of fiber orientations on the crack surface on the interlaminar fracture toughness of Gr/Ep compositeslink 윤성호; Yoon, Sung-Ho; et al, 한국과학기술원, 1985 |
830 | 선회화염의 유동장 특성에 관한 실험적 연구 = An experimental study on the flow field of the swirling flamelink 민대기; Min, Dai-Ki; et al, 한국과학기술원, 1985 |
831 | Wall reflection of a vortex ring = 와환의 벽면 반사link Sa, Jong-Youb; 사종엽; et al, 한국과학기술원, 1985 |
832 | 보-트러스 복합구조물의 최적 설계 = Optimal design of beam-truss bulit-up structureslink 박정선; Park, Jung-Sun; et al, 한국과학기술원, 1985 |
833 | 균일전단류가 원통형 실린더 주변의 압력및 표면 마찰력 분포에 미치는 영향 = The effect of upstream uniform shear on the distributions of pressure and skin friction aroud a circular cylinderlink 김상준; Kim, Sang-Jun; et al, 한국과학기술원, 1985 |
834 | Incompressible turbulent flow over rectangular cavity = 직각 공동 위를 흐르는 비압축성 난류 유동link Kim, Sung-Ch'o; 김성초; et al, 한국과학기술원, 1985 |
835 | 후방 계단 뒤 난류 재부착 흐름의 흐름방향 압력구배의 영향에 대한 실험적 연구 = An experimental investigation of the turbulent reattaching flow behind the rearward-facing step effected by the streamwise pressure gradientlink 라승호; Ra, Seung-Ho; et al, 한국과학기술원, 1985 |
836 | STEP 형상의 연소실내에서 예혼합 개스의 난류연소특성에 관한 실험적 연구 = An experimental study on the two-dimensional turbulent premixed flame stabilized by the rearward facing steplink 구형모; Koo, Hyeong-Mo; et al, 한국과학기술원, 1985 |
837 | Finite volume method 를 이용한 타원 익형 주위의 천음속 유동장 해석 = Numerical analysis of transonic flow field around elliptic airfoil using finite volume methodlink 박정주; Park, Jeong-Joo; 장근식; 박승오; et al, 한국과학기술원, 1984 |
838 | 연소 가스-공기의 이차원 혼합 영역에서의 Coherent 구조 생성특성에 관한 연구 = A study on the coherent structure formation in the mixing layer between combustion gas and airlink 한태식; Han, Tae-Seek; et al, 한국과학기술원, 1984 |
839 | Satellite attitude control by an internal moving mass and a momentum wheel = 내부 질량과 모멘텀 휠을 사용한 인공위성 자세제어link Cho, Young-Seok; 조영석; et al, 한국과학기술원, 1984 |
840 | Pressure distribution induced by the interaction between the shock wave and the turbulent boundary layer around a compression corner = 모퉁이 초음속 난류 흐름에서 경계층과 충격파의 상호작용에서 유도된 압력분포의 이론적 해석link Kang, Hae-Goo; 강해구; et al, 한국과학기술원, 1984 |