Browse "ME-Theses_Ph.D.(박사논문) " by Issue Date 

Jump to a point in the index:

Showing results 1 to 20 of 1907

1
反復應力-變形率關係와 短壽命疲勞 = Cyclic stress-strain relationship and low cycle fatiguelink

양창주; Yang, Chang-Joo; et al, 한국과학기술원, 1978

2
Aanlysis of three-dimensional extrusion of sections = 3차원 압출의 해석link

Yang, Dong-Yol; 양동열; et al, 한국과학기술원, 1978

3
초음파 진동의 액체금속의 응고에 미치는 영향 = Effect of ultrasonic vibration on the solidification of liquid metallink

최영돈; Choi, Young-Don; et al, 한국과학기술원, 1979

4
이온질화에 있어 탄소량의 영향과 이온질화강의마모특성 = Carbon effects in ion-nitriding and wear characteristics of ion-nitrided steellink

조규식; Cho, Kyu-Sik; et al, 한국과학기술원, 1979

5
선삭가공의 적응제어에 관한 연구 = A study on the adaptive control system for turning processlink

허주; Hoh, Joo; et al, 한국과학기술원, 1980

6
전자식 유압 비례 복합 밸브에 관한 연구 = Study of an electro-hydraulic proportional compound valvelink

송창섭; Song, Chang-Seop; et al, 한국과학기술원, 1980

7
(A) dislocation theory of semi-brittle fracture = 반취성 파괴 이론link

Chung, Soon-Kil; 정순길; et al, 한국과학기술원, 1981

8
연삭공정에 있어서 자려진동 해석 및 임펙트 뎀퍼의 효과에 관한 연구 = A study of self-excited vibratition and impact damper in grinding processlink

김옥현; Kim, Ock-Hyun; et al, 한국과학기술원, 1983

9
Hydrofilm extrusion through optimized curved dies = 최적곡면금형을 통한 박막식 정수압 압출link

Cho, Nam-Seon; 조남선; et al, 한국과학기술원, 1983

10
부력의 영향을 받는 수평경계층 유동에 대한 4-방정식 난류모델의 해석 = Four-equation turbulence model for prediction of the turbulent boundary layer affected by buoyancy force over a flat plate ;link

성형진; Sung, Hyung-Jin; et al, 한국과학기술원, 1984

11
탄소성 접촉 문제의 해석 및 응용 = Analysisand applucatiins of the elastoplastic contact problemslink

이병채; Lee, Byung-Chai; et al, 한국과학기술원, 1984

12
평면기구의 회전연결부에서의 간극효과를 고려한동적해석 및 설계 = Dynamic analysis and design of planar mechanisms with clearances at revolute jointslink

신재균; Shin, Jae-Kyun; et al, 한국과학기술원, 1985

13
Graphite/Epoxy Angle-Ply 복합 적층판의 층간균열성장에 관한 해석 = Anlysis of delamination crack growth in graphite/epoxy angle-ply laminated compositelink

김광수; Kim, Kwang-Soo; et al, 한국과학기술원, 1985

14
Analysis of the ring rolling process by using dual velocity field = 이중속도장을 고려한 환상압연해석link

Ryoo, Jang-Soo; 류장수; et al, 한국과학기술원, 1985

15
Laminar natural convection heat transfer about a heated horizontal cylinder having an attached or separated plume = 附着 혹은 剝離된 熱上昇流를 갖는 加熱된 水平실린더 주위의 層流 自然對流link

Cho, Chul-Hyung; 조철형; et al, 한국과학기술원, 1985

16
비정상 온도분포로 인한 대류발생에 관한 연구 = Onset of convection from time-depent temperature profilelink

김경훈; Kim, Kyoung-Hoon; et al, 한국과학기술원, 1985

17
비균질성 석출물의 탄성장과 상호작용에너지 = Elastic field and interaction energy of inhomogeneous precipitateslink

최병익; Choi, Byung-Ik; et al, 한국과학기술원, 1985

18
Performance analysis of reactive silencers withconsideration of the effects of higher order acoustic modes = 반사형 소음기에 있어서 고차 모드 음파의 영향을 고려한 성능 해석link

Ih, Jeung-Guon; 이정권; et al, 한국과학기술원, 1985

19
Automatic modal balancing of flexible rotors during operation by using a single balancing head = 단일면 밸런싱 장치를 이용한 탄성회전체의 운전중 자동 모우드 밸런싱link

Kim, Young-Dae; 김영대; et al, 한국과학기술원, 1985

20
(A) study on the modelling and suboptimal control of the resistance spot welding process = 저항 용접 과정의 모델링과 부최적 제어에 관한 연구link

Cho, Young-June; 조영준; et al, 한국과학기술원, 1986

rss_1.0 rss_2.0 atom_1.0