다관절 손 기구의 설계 및 제어에 관한 연구A Study on the Design and Control of an Articulated Hand

Cited 0 time in webofscience Cited 0 time in scopus
  • Hit : 247
  • Download : 2
DC FieldValueLanguage
dc.contributor.author김철우ko
dc.contributor.author김철우ko
dc.date.accessioned2011-07-04T08:44:50Z-
dc.date.available2011-07-04T08:44:50Z-
dc.date.created2012-02-06-
dc.date.created2012-02-06-
dc.date.issued1993-12-
dc.identifier.citation한국정밀공학회지, v.10, no.4, pp.200 - 205-
dc.identifier.issn1225-9071-
dc.identifier.urihttp://hdl.handle.net/10203/24403-
dc.description.abstractIn many applications, the typical parallel-jaw end-effector of a robot arm has been remarkably satisfactory. But it is not adequate for the applications such as complicated manipulation. Therefore, the developement of a hand with dexterity is necessary. In this study, a finger with 4 joints (so, having redundancy) was constructed to investigate the characteristics of an articulated hand. Each joint was driven by one actuator, and the motor torque was transmited to each joint through a tendon-pulley system. in the context, major considerations for hardware design and the method to solve the inverse kinematics of a redundant manipulator were presented. Finally, the basic capabilities of an articulated hand were presented through experiments.-
dc.languageKorean-
dc.language.isokoen
dc.publisher한국정밀공학회-
dc.title다관절 손 기구의 설계 및 제어에 관한 연구-
dc.title.alternativeA Study on the Design and Control of an Articulated Hand-
dc.typeArticle-
dc.subject.alternativeArticulated Handen
dc.subject.alternativepseudo inverse matrixen
dc.subject.alternativeredundanten
dc.type.rimsART-
dc.citation.volume10-
dc.citation.issue4-
dc.citation.beginningpage200-
dc.citation.endingpage205-
dc.citation.publicationname한국정밀공학회지-
dc.embargo.liftdate9999-12-31-
dc.embargo.terms9999-12-31-
dc.contributor.localauthor김철우-
dc.contributor.nonIdAuthor김철우-
Appears in Collection
ME-Journal Papers(저널논문)
Files in This Item

qr_code

  • mendeley

    citeulike


rss_1.0 rss_2.0 atom_1.0