Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Master)

Showing results 1560 to 1579 of 2170

1560
나노 흡착제가 Li/S 이차전지용 유황양극의 전기화학적 특성에 미치는 영향 = The effects of the nano-sized adsorbing material on the electrochemical properties of sulfur cathode for lithium/sulfur secondary batterylink

송민상; Song, Min-Sang; et al, 한국과학기술원, 2003

1561
나노인덴터를 활용한 RF MEMS 스위치의 신뢰성 평가 연구 = Characterization of contact reliability in RF MEMS switch using nano-indenterlink

김동석; Kim, Dong-Seok; et al, 한국과학기술원, 2010

1562
나노탬플릿과 원자층 증착법을 이용한 정렬된 TiN, $TiO_2$ 일차원 나노구조의 제조와 특성평가 = Fabrication and characterization of aligned TiN, $TiO_2$ one-dimensional nanostructures by nanotemplate and atomic layer depositionlink

김상준; Kim, Sang Joon; et al, 한국과학기술원, 2013

1563
나노템플릿을 이용한 금속 나노와이어 성장에 관한 연구 = A study on the growth of metal nanowires based on template methodlink

신호선; Shin, Ho-Sun; et al, 한국과학기술원, 2007

1564
나프토퀴논디아지드를 도입한 중합체의 합성 및 감광특성 = Synthesis and characterization of phtosensitive polymers contatining Naphethoquinonediazidelink

정민호; Jung, Min-Ho; et al, 한국과학기술원, 1994

1565
낮은온도, 1기압수소압력하에서 순철과 철합금에 용해되는 수소양에 대한 고찰 = Hydrogen solubility in iron and its alloys at low temperature and atmospheric hydrogen pressurelink

조창국; Cho, Chang-Guck; et al, 한국과학기술원, 1980

1566
내부 압력 인가 법을 통한 입자형 핵연료의 탄화규소 코팅 층에 대한 파괴 강도 평가 = Characterization of the fracture strength for SiC coating layer in TRISO fuel particles by internal pressurization testlink

김민우; Kim, Min-U; 김도경; Kim, Do-Kyung; et al, 한국과학기술원, 2008

1567
내후성강 (USS COR-TEN C Steel)에서 V 을 Ti 으로 치환할 경우 강의 기계적 성질에 미치는 영향 = The effects of substituting Ti for V on mechanical properties in a weathering type HSLA steel (USS COR-TEN C steel)link

한종만; Han, Jong-Man; et al, 한국과학기술원, 1982

1568
냉각 속도가 알루미늄 합금의 응고시 편석에 미치는 영향에 관한 실험적 및 수치해석적 연구 = Effect of cooling rate on the solidification segregation of aluminum alloyslink

최정윤; Choi, Jeong-Yun; et al, 한국과학기술원, 2001

1569
냉각속도가 W-Ni-Fe 고밀도합금의 기계적 성질에 미치는 영향 = The effect of cooling rate on mechanical properties of W-Ni-Fe heavy alloylink

문유현; Moon, You-Hyun; et al, 한국과학기술원, 1977

1570
냉각속도가 철-동계 소결체의 강도에 미치는 영향 = The effect of cooling rate on the strength of iron-copper sintered compactslink

강수석; Kang, Su-Sok; et al, 한국과학기술원, 1975

1571
냉간 가공량이 방향성 규소강판의 2차 재결정에 미치는 영향 = The role of cold work on the secondary recrystallization of silicon steellink

한장섭; Hahn, Jang-Sop; et al, 한국과학기술원, 1981

1572
냉간 가공한 Al-Zr 합금의 소둔 경화에 대한 연구 = A study on anneal hardening of cold worked Al-Zr alloyslink

박충년; Park, Choong-Nyeon; et al, 한국과학기술원, 1980

1573
냉간 압연된 Cu-Ni-Si-P-Mg 리드프레임용 합금의 기계적 성질의 이방성과 Tension Levelling 처리시 격자 변형의 변화에 대한 연구 = A study on the anisotropy of mechanical properties and the change of lattice distortion with tension levelling treatment in cold rolled Cu-Ni-Si-P-Mg leadframe alloylink

진영훈; Chin, Young-Hoon; et al, 한국과학기술원, 1994

1574
냉간가공된 고장력강에서 수소에 의해 발생되는 균열에 대한 연구 = A study on hydrogen-induced cracks in a prestrained high strength steellink

황인환; Hwang, In-Hwan; et al, 한국과학기술원, 1979

1575
냉금이 마그네슘 합금주물의 기계적 성질에 미치는 영향 = The effect of chilling on the mechanical properties of magnesium alloy castingslink

이동주; Rhee, Dong-Joo; et al, 한국과학기술원, 1977

1576
노르보넨 카르복시산 에스테르의 중합과 광분해성 = Synthesis and photolytic properties of poly(norbornene carboxylic acid esterslink

이재형; Lee, Jai-Hyung; et al, 한국과학기술원, 1995

1577
노르보넨 카르복시산 에스테르의 중합과 광분해성 = Synthesis and photolytic properties of poly(norbornene carboxylic acid esters)link

천성득; Chun, Sung-Deuk; et al, 한국과학기술원, 1995

1578
높은 유황 함량을 가지는 고용량 장수명 리튬 유황 배터리 양극 물질 개발 = Development of high-capacity and long-life lithium sulfur battery cathode material with high sulfur contentlink

김지헌; 정성윤; et al, 한국과학기술원, 2019

1579
니켈 셀레나이드 촉매의 산소발생반응 시 활성도 변화 및 수산화물 형성에 대한 투과전자현미경 연구 = Unveiling mechanism of electrochemical activation and phase transformation during alkaline oxygen evolution reaction in nickel selenidelink

김동호; 정성윤; et al, 한국과학기술원, 2022

rss_1.0 rss_2.0 atom_1.0