Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Issue Date 

Jump to a point in the index:

Showing results 17821 to 17840 of 19220

17821
알루미늄-실리콘 합금의 부식마모에 미치는 부하전위의 영향 = Effects of applied potential on corrosive wear of Al-Si alloylink

현준수; Hyun, Jun-Soo; et al, 한국과학기술원, 1989

17822
AISI 304L 스텐레스강의 고온 저주파 피로 시험시 균열생성과 균열 전파속도에 미치는 인장유지시간의 영향에 관한연구 = A study of effects of tensile hold time on the crack initiation and propagation rate on the high temperature low cycle fatigue in AISI 304L stainless steellink

이정근; Lee, Jung-Geun; et al, 한국과학기술원, 1989

17823
Al-Zn-Mg 합금에서 single edge notched 시편을 사용한 부식피로 균열전파 거동에 미치는 응력비와 응력 주파수의 영향 = Effects of stress ratio and stress frequency on the corrosion fatigue crack propagation behaviour of Al-Zn-Mg alloy by using single edge notched specimenlink

전영갑; Chun, Young-Gab; et al, 한국과학기술원, 1989

17824
3.5NiCrMoV강에서 일정 $C_t$ 및 일정 변위율 조건에서의 크리프 균열 전파에 관한 연구 = A study of the creep crack growth behavior in 3.5NiCrMoV steel under constant $C_t$ or constant displacement rate conditionslink

류석현; Ryu, Seog-Hyeon; et al, 한국과학기술원, 1989

17825
3.5wt.% NaCl 용액에서 3.5NiCr 강의 응력부식파괴 거동에 미치는 인(P)의 함량 및 tempering 온도의 영향 = Effects of P content and tempering temperature on the behaviour of stress corrosion cracking of 3.5 NiCr steel in 3.5 wt.% NaCl solutionlink

송복한; Song, Bok-Han; et al, 한국과학기술원, 1989

17826
Cu-Ni 합금계에서 용질원자가 정적 및 반복응력 크립거동에 미치는 영향 = The effect of solute atom on the static and cyclic creep behavior of Cu-Ni alloylink

이상인; Rhee, Sang-In; et al, 한국과학기술원, 1989

17827
Al-Li-(Zr)이원합금의 시효특성에 미치는 copper첨가의 영향 = The effects of Cu addition on the aging characteristics of Al-Li binary alloyslink

이승석; Lee, Seaung-Suk; et al, 한국과학기술원, 1989

17828
압전세라믹-폴리머 복합체의 유전 및 압전특성 = Dielectric and piezoelectric properties of piezoelectric ceramic-polymer compositeslink

이형규; Lee, Hyeung-Gyu; et al, 한국과학기술원, 1989

17829
MPB-PZT ceramics 에서 전계에 의한 미세구조 및 물리적 특성의 변화 = Effects of a electric field on the microstructure and physical properties for the MPB-PZT ceramicslink

임종인; Im, Jong-In; et al, 한국과학기술원, 1989

17830
ZTA 에서 표면 잔류압축응력에 의한 파괴인성 증진에 대한 연구 = On fracture toughness enhancement by residual compressive stress at surface in ZTAlink

이영민; Lee, Young-Min; et al, 한국과학기술원, 1989

17831
탄화규소 단섬유 강화 질화규소 기지 복합재료의 소결 및 기계적 특성에 관한 연구 = A study on the sintering and mechanical properties of SiC whisker reinforced $Si_3N_4$ matrix compositeslink

고상철; Koh, Sang-Cheol; et al, 한국과학기술원, 1989

17832
Hot-filament 화학증착법으로 제조한 다이아몬드의 성장특성에 관한 연구 = A study on the growth characteristics of diamond prepared by hot-filament chemical vapor depositionlink

김종성; Kim, Jong-Sung; et al, 한국과학기술원, 1989

17833
Nb 함유 HSLA강의 저주기 피로실험에서 분위기의 영향 및 소성변형에너지에 관한 연구

홍순형; 박종욱; 이원종, 대한금속·재료학회지, v.27, no.5, pp.473 - 481, 1989

17834
Effect of Entrapped and External Gas Pressure on Densification during Liquid Pha se Sintering.

Kang, Suk-Joong L, Elsevier Applied Science, pp.471 - 474, 1988-12-01

17835
The α/β Transformation in Si3N4-Nd2O3-Al2O3

Kang, Suk-Joong L, 7th SIMCER, pp.14 - 16, 1988-12-01

17836
Al-Li계 합금에서의 석출현상

Park, Joong Keun, 제1회 상변태 심포지엄, pp.51 - 63, 1988-12-01

17837
Preparation and Deposition Mechanism of Ferroelectric PbTiO3 Thin Films by Chemical Vapor Deposition

S.G.Yoon; Kim, Ho Gi, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, v.135, no.12, pp.3137 - 3140, 1988-12

17838
Precipitate microstructure of peak-aged 7075 Al

Park, Joong Keun; Ardell, A.J., Scripta Metallurgica, v.22, no.7, pp.1115 - 1119, 1988-12

17839
RRA 열처리가 고순도 Al - 6.6 Zn - 2.5 Mg 합금의 강도 및 내응력 부식성에 미치는 영향에 관한 연구

구형균; 박중근, 대한금속학회지, v.26, no.3, pp.273 - 281, 1988-12

17840
퇴화 및 재시효 처리가 고강도 Al 7075합금에 미치는 영향

남효학; 이재영; 박중근, J. OF KOREAN INST. MET. MATER.(한국), v.26, no.2, pp.134 - 142, 1988-12

rss_1.0 rss_2.0 atom_1.0