Browse "Dept. of Materials Science and Engineering(신소재공학과)" byAuthorRaabe, D.

Showing results 1 to 34 of 34

1
Alloy Design, Combinatorial Synthesis, and Microstructure-Property Relations for Low-Density Fe-Mn-Al-C Austenitic Steels

Raabe, D.; Springer, H.; Gutierrez-Urrutia, I.; Roters, F.; Bausch, M.; Seol, J. -B.; Koyama, M.; et al, JOM, v.66, no.9, pp.1845 - 1856, 2014-09

2
Atom probe study of Cu2ZnSnSe4 thin-films prepared by co-evaporation and post-deposition annealing

Schwarz, T.; Cojocaru-Miredin, O.; Choi, Pyuck-Paresearcher; Mousel, M.; Redinger, A.; Siebentritt, S.; Raabe, D., APPLIED PHYSICS LETTERS, v.102, no.4, 2013-01

3
Atom probe tomography characterization of heavily cold drawn pearlitic steel wire

Li, Y. J.; Choi, Pyuck-Paresearcher; Borchers, C.; Chen, Y. Z.; Goto, S.; Raabe, D.; Kirchheim, R., ULTRAMICROSCOPY, v.111, no.6, pp.628 - 632, 2011-05

4
Atom probe tomography observation of hydrogen in high-Mn steel and silver charged via an electrolytic route

Haley, D.; Merzlikin, S. V.; Choi, Pyuck-Paresearcher; Raabe, D., INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.39, no.23, pp.12221 - 12229, 2014-08

5
Atom probe tomography study of internal interfaces in Cu2ZnSnSe4 thin-films

Schwarz, T.; Cojocaru-Miredin, O.; Choi, Pyuck-Paresearcher; Mousel, M.; Redinger, A.; Siebentritt, S.; Raabe, D., JOURNAL OF APPLIED PHYSICS, v.118, no.9, 2015-09

6
Atomic scale investigation of redistribution of alloying elements in pearlitic steel wires upon cold-drawing and annealing

Li, Y. J.; Choi, Pyuck-Paresearcher; Goto, S.; Borchers, C.; Raabe, D.; Kirchheim, R., ULTRAMICROSCOPY, v.132, pp.233 - 238, 2013-09

7
Atomic-scale characterization of the CdS/CuInSe2 interface in thin-film solar cells

Cojocaru-Miredin, O.; Choi, Pyuck-Paresearcher; Wuerz, R.; Raabe, D., APPLIED PHYSICS LETTERS, v.98, no.10, 2011-03

8
Atomic-scale compositional characterization of a nanocrystalline AlCrCuFeNiZn high-entropy alloy using atom probe tomography

Pradeep, K. G.; Wanderka, N.; Choi, Pyuck-Paresearcher; Banhart, J.; Murty, B. S.; Raabe, D., ACTA MATERIALIA, v.61, no.12, pp.4696 - 4706, 2013-07

9
Atomic-scale distribution of impurities in CuInSe2-based thin-film solar cells

Cojocaru-Miredin, O.; Choi, Pyuck-Paresearcher; Wuerz, R.; Raabe, D., ULTRAMICROSCOPY, v.111, no.6, pp.552 - 556, 2011-05

10
Atomic-scale investigation of epsilon and theta precipitates in bainite in 100Cr6 bearing steel by atom probe tomography and ab initio calculations

Song, W.; von Appen, J.; Choi, Pyuck-Paresearcher; Dronskowski, R.; Raabe, D.; Bleck, W., ACTA MATERIALIA, v.61, no.20, pp.7582 - 7590, 2013-12

11
Atomic-scale mechanisms of deformation-induced cementite decomposition in pearlite

Li, Y. J.; Choi, Pyuck-Paresearcher; Borchers, C.; Westerkamp, S.; Goto, S.; Raabe, D.; Kirchheim, R., ACTA MATERIALIA, v.59, no.10, pp.3965 - 3977, 2011-06

12
Atomic-Scale Quantification of Grain Boundary Segregation in Nanocrystalline Material

Herbig, M.; Raabe, D.; Li, Y. J.; Choi, Pyuck-Paresearcher; Zaefferer, S.; Goto, S., PHYSICAL REVIEW LETTERS, v.112, no.12, 2014-03

13
Characterization of Nano-Sized Precipitates in a Mn-Based Lean Maraging Steel by Atom Probe Tomography

Milian, J.; Ponge, D.; Raabe, D.; Choi, Pyuck-Paresearcher; Dmitrieva, O., STEEL RESEARCH INTERNATIONAL, v.82, no.2, pp.137 - 145, 2011-02

14
Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulation

Dmitrieva, O.; Ponge, D.; Inden, G.; Millan, J.; Choi, Pyuck-Paresearcher; Sietsma, J.; Raabe, D., ACTA MATERIALIA, v.59, no.1, pp.364 - 374, 2011-01

15
Crystallization, phase evolution and corrosion of Fe-based metallic glasses: An atomic-scale structural and chemical characterization study

Duarte, M. J.; Kostka, A.; Jimenez, J. A.; Choi, Pyuck-Paresearcher; Klemm, J.; Crespo, D.; Raabe, D.; et al, ACTA MATERIALIA, v.71, pp.20 - 30, 2014-06

16
Dynamic strain aging studied at the atomic scale

Aboulfadl, H.; Deges, J.; Choi, Pyuck-Paresearcher; Raabe, D., ACTA MATERIALIA, v.86, pp.34 - 42, 2015-03

17
Element-Resolved Corrosion Analysis of Stainless-Type Glass-Forming Steels

Duarte, M. J.; Klemm, J.; Klemm, S. O.; Mayrhofer, K. J. J.; Stratmann, M.; Borodin, S.; Romero, A. H.; et al, SCIENCE, v.341, no.6144, pp.372 - 376, 2013-07

18
Enhanced superplasticity in an Al-alloyed multicomponent Mn-Si-Cr-C steel

Zhang, H.; Pradeep, K. G.; Mandal, S.; Ponge, D.; Choi, Pyuck-Paresearcher; Tasan, C. C.; Raabe, D., ACTA MATERIALIA, v.63, pp.232 - 244, 2014-01

19
Evolution of strength and microstructure during annealing of heavily cold-drawn 6.3 GPa hypereutectoid pearlitic steel wire

Li, Y. J.; Choi, Pyuck-Paresearcher; Goto, S.; Borchers, C.; Raabe, D.; Kirchheim, R., ACTA MATERIALIA, v.60, no.9, pp.4005 - 4016, 2012-05

20
Exploring the p-n junction region in Cu(In,Ga)Se-2 thin-film solar cells at the nanometer-scale

Cojocaru-Miredin, O.; Choi, Pyuck-Paresearcher; Wuerz, R.; Raabe, D., APPLIED PHYSICS LETTERS, v.101, no.18, 2012-10

21
Grain boundary segregation engineering in metallic alloys: A pathway to the design of interfaces

Raabe, D.; Herbig, M.; Sandloebes, S.; Li, Y.; Tytko, D.; Kuzmina, M.; Ponge, D.; et al, CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, v.18, no.4, pp.253 - 261, 2014-08

22
Grain boundary segregation in a bronze-route Nb3Sn superconducting wire studied by atom probe tomography

Sandim, M. J. R.; Tytko, D.; Kostka, A.; Choi, Pyuck-Paresearcher; Awaji, S.; Watanabe, K.; Raabe, D., SUPERCONDUCTOR SCIENCE & TECHNOLOGY, v.26, no.5, 2013-05

23
Grain boundary segregation in Fe-Mn-C twinning-induced plasticity steels studied by correlative electron backscatter diffraction and atom probe tomography

Herbig, M.; Kuzmina, M.; Haase, C.; Marceau, R. K. W.; Gutierrez-Urrutia, I.; Haley, D.; Molodov, D. A.; et al, ACTA MATERIALIA, v.83, pp.37 - 47, 2015-01

24
Influence of supersaturated carbon on the diffusion of Ni in ferrite determined by atom probe tomography

Kresse, T.; Li, Y. J.; Boll, T.; Borchers, C.; Choi, Pyuck-Paresearcher; Al-Kassab, T.; Raabe, D.; et al, SCRIPTA MATERIALIA, v.69, no.5, pp.424 - 427, 2013-09

25
Measurement of the indium concentration in high indium content InGaN layers by scanning transmission electron microscopy and atom probe tomography

Mehrtens, T.; Schowalter, M.; Tytko, D.; Choi, Pyuck-Paresearcher; Raabe, D.; Hoffmann, L.; Joenen, H.; et al, APPLIED PHYSICS LETTERS, v.102, no.13, 2013-04

26
Mechanisms of subgrain coarsening and its effect on the mechanical properties of carbon-supersaturated nanocrystalline hypereutectoid steel

Li, Y. J.; Kostka, A.; Choi, Pyuck-Paresearcher; Goto, S.; Ponge, D.; Kirchheim, R.; Raabe, D., ACTA MATERIALIA, v.84, pp.110 - 123, 2015-02

27
Nanocrystalline Fe-C alloys produced by ball milling of iron and graphite

Chen, Y. Z.; Herz, A.; Li, Y. J.; Borchers, C.; Choi, Pyuck-Paresearcher; Raabe, D.; Kirchheim, R., ACTA MATERIALIA, v.61, no.9, pp.3172 - 3185, 2013-05

28
Nanoscale austenite reversion through partitioning, segregation and kinetic freezing: Example of a ductile 2 GPa Fe-Cr-C steel

Yuan, L.; Ponge, D.; Wittig, J.; Choi, Pyuck-Paresearcher; Jimenez, J. A.; Raabe, D., ACTA MATERIALIA, v.60, no.6-7, pp.2790 - 2804, 2012-04

29
Pulsed-laser atom probe studies of a precipitation hardened maraging TRIP steel

Dmitrieva, O.; Choi, Pyuck-Paresearcher; Gerstl, S. S. A.; Ponge, D.; Raabe, D., ULTRAMICROSCOPY, v.111, no.6, pp.623 - 627, 2011-05

30
Segregation engineering enables nanoscale martensite to austenite phase transformation at grain boundaries: A pathway to ductile martensite

Raabe, D.; Sandloebes, S.; Millan, J.; Ponge, D.; Assadi, H.; Herbig, M.; Choi, Pyuck-Paresearcher, ACTA MATERIALIA, v.61, no.16, pp.6132 - 6152, 2013-09

31
Segregation of boron at prior austenite grain boundaries in a quenched martensitic steel studied by atom probe tomography

Li, Y. J.; Ponge, D.; Choi, Pyuck-Paresearcher; Raabe, D., SCRIPTA MATERIALIA, v.96, pp.13 - 16, 2015-02

32
Strain hardening by dynamic slip band refinement in a high-Mn lightweight steel

Welsch, E.; Ponge, D.; Haghighat, S. M. Hafez; Sandloebes, S.; Choi, Pyuck-Paresearcher; Herbig, M.; Zaefferer, S.; et al, ACTA MATERIALIA, v.116, pp.188 - 199, 2016-09

33
Strengthening and strain hardening mechanisms in a precipitation-hardened high-Mn lightweight steel

Yao, M. J.; Welsch, E.; Ponge, D.; Haghighat, S. M. H.; Sandloebes, S.; Choi, Pyuck-Paresearcher; Herbig, M.; et al, ACTA MATERIALIA, v.140, pp.258 - 273, 2017-11

34
Understanding the detection of carbon in austenitic high-Mn steel using atom probe tomography

Marceau, R. K. W.; Choi, Pyuck-Paresearcher; Raabe, D., ULTRAMICROSCOPY, v.132, pp.239 - 247, 2013-09

Discover

Type

. next

Open Access

Date issued

. next

Subject

. next

rss_1.0 rss_2.0 atom_1.0