Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Master)

Showing results 796 to 815 of 2170

796
$K_2O-SiO_2-TiO_2$ 계 유리의 결정화에 관한 연구 = Crystallization of $K_2O-SiO_2-TiO_2$ glasseslink

김성식; Kim, Seong-Sig; et al, 한국과학기술원, 1983

797
Kinetics of double-layer charging/discharging of the activated carbon fiber cloth electrode : effects of pore length distribution and solution resistance = 활성탄소섬유망 전극의 이중층 충/방전의 속도론에 관한 연구 : 기공길이분포와 용액저항의 영향link

Lee, Gyoung-Ja; 이경자; et al, 한국과학기술원, 2003

798
Kinetics of oxygen reduction on porous mixed conducting $(La_{0.85}Sr_{0.15})_{0.9}MnO_3$ electrode by Ac-impedance analysis = 교류 임피던스 해석을 통한 다공성의 혼합 전도성 $(La_{0.85}Sr_{0.15})_{0.9}MnO_3$ 전극에서의 산소 환원 반응에 관한 속도론적 연구link

Kim, Ju-Sik; 김주식; et al, 한국과학기술원, 2005

799
$L1_2$ (Al,Cr)3Ti기 2상 금속간화합물의 기계적성질에 미치는 미세조직제어 효과 = Effects of microstructural controls on mechanical properties of two-phase intermetallic compounds based on $L1_2$ (Al,Cr)3Tilink

이재경; Lee, Jae-Kyeong; et al, 한국과학기술원, 1999

800
$L1_2$기 Al-Ti-Cr합금의 상안정성에 미치는 Zr첨가효과 = Effects of Zr addition on the phase stability of $L1_2$ -based Al-Ti-Cr alloyslink

천동현; Chun, Dong-Hyun; et al, 한국과학기술원, 2003

801
$L1_2$형 $(Al,Cr)_3Ti$기 이상 금속간화합물의 소성변형 = Plastic behavior of two-phase intermetallic compounds based on $L1_2$ type $(Al,Cr)_3Ti$link

박정용; Park, Jeong-Yong; et al, 한국과학기술원, 1994

802
$L1_2(Al,Cr)_3Ti$ 합금의 상안정성에 미치는 합금원소 첨가효과 = Effects of alloying elements on the phase stability of $L1_2 (Al,Cr)_3Ti$ coating materialslink

오민욱; Oh, Min-Wook; et al, 한국과학기술원, 2002

803
$La_2O_3$를 첨가한 $BaTiO_3$ 유전 소재의 시효 현상에 관한 연구 = Study on the aging phenomenon of the $La_2O_3$-doped $BaTiO_3$ dielectricslink

이문호; Lee, Moon-Ho; et al, 한국과학기술원, 1978

804
LaCoO3 페로브스카이트 산화물의 산소발생반응 시 표면 비정질화 현상 원자단위 직접 관찰 = Atomic-scale observation of surface amorphization in LaCoO3perovskite oxide during oxygen evolution reactionlink

이형도; 조힘찬; et al, 한국과학기술원, 2023

805
Lamellar TiAl 합금의 primary크리프시 칼날전위와 lamellar interface간의 상호작용에 의한 $α_2/γ$ 상변태 기구 규명 = Investigation of the $α_2/γ$ phase transformation mechanism under the interaction of edge dislocation with lamellar interface in primary creep of lamellar TiAl alloyslink

양승진; Yang, Seung-Jin; et al, 한국과학기술원, 2000

806
Lamellar 구조 TiAl 합금에서 lamellar spacing의 변화에 따른 크리프 변형기구에 대한 연구 = A study on the creep deformation mechanism of the lamellar TiAl alloys with lamellar spacinglink

배양호; Bae, Yang-Ho; et al, 한국과학기술원, 1999

807
Lamellar 조직을 갖는 TiAl 금속간화합물의 고온 저주파 피로 특성에 대한 탄소 첨가의 효과 = The effects of carbon addition on the high temperature low cycle fatigue property in lamellar structured tial alloylink

안우송; Ahn, Woo-Song; et al, 한국과학기술원, 2001

808
$LaNi_5$ 및 $LaNi_{4.7}Al_{0.3}$ 의 temperature-induced-cycling 에 따른 intrinsic degradation 현상에 대한 연구 = A study on the intrinsic degradation phenomena of $LaNi_5$ and $LaNi_{4.7}Al_{0.3}$ during temperature-induced-cyclinglink

박종만; Park, Jong-Man; et al, 한국과학기술원, 1986

809
$LaNiO_3$와 $LaCoO_3$의 B site 원소 치환에 따른 산소발생반응 활성도 변화 = Change of oxygen evolution reaction activity by B site substitution on $LaNiO_3$ and $LaCoO_3$ perovskitelink

윤태규; 정성윤; et al, 한국과학기술원, 2020

810
Lanthanide가 도핑된 $LiFePO_4$ 의 구조와 전기 화학적 특성과의 관계연구 = Structure and electrochemical property of $LiFePO_4$ doped with lanthanidelink

유진성; Yoo, Jin-Seong; et al, 한국과학기술원, 2005

811
Lanthanum 이 첨가된 투명세라믹 strontium barium niobate $〔(Sr_{0.75}Ba_{0.25})_{5-7.5x}La_{5x}〕Nb_{10}O_{30}$ 과 물리적 성질 = Lanthanum -modified transparent strontium barium niobate $〔(Sr_{0.75}Ba_{0.25})_{5-7.5x}La_{5x}〕Nb_{10}O_{30}$ ceramics and their physical propertieslink

이상인; Lee, Sang-In; et al, 한국과학기술원, 1985

812
Lanthanum이 치환된 barium sodium niobate 세라믹의 상전이에 관한 연구 = The phase transition in lanthanum modified barium sodium niobate ceramicslink

김기찬; Kim, Key-Chan; et al, 한국과학기술원, 1989

813
Large-area synthesis of ultra-thin, flexible, and transparent conductive metal-organic framework thin-films via microfluidic-based solution shearing process = 미세유체기반 용액 전단 공정을 통한 대면적 다기능 전도성 금속유기골격체 박막 제작link

Lee, Taehoon; Park, Steve; et al, 한국과학기술원, 2022

814
Large-scale fabrication of single-crystal silicon nanowires with in-plane alignment using solvent-assisted nanotransfer printing = 용매 주입 나노전사 프린팅 기술을 바탕으로 한 대면적에 정렬된 단결정 실리콘 나노와이어의 제작에 관한 연구link

Yang, Se Ryeun; 양세련; et al, 한국과학기술원, 2015

815
Large-scale molecular dynamics simulation for computation of Peierls stress of screw dislocation in silicom = 실리콘 나선전위의 파이얼스 응력 계산을 위한 대규모 분자동역학 전산모사link

Bak, Min-Gyu; 박민규; et al, 한국과학기술원, 2012

rss_1.0 rss_2.0 atom_1.0