Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Master)

Showing results 1709 to 1728 of 2170

1709
사출성형에 의한 탄화규소 세라믹스의 제조 = Fabrication of SiC ceramics by injection mouldinglink

이기민; Lee, Key-Min; et al, 한국과학기술원, 1996

1710
사파이어 기판 위에 성장된 GaN 박막의 구조적 특성에 관한 연구 = A study on structural properties of GaN epilayers grown on sapphire substratelink

전희정; Jeon, Hee-Jeong; et al, 한국과학기술원, 2002

1711
사형 주조된 Mg-9wt%Al-Zn 합금의 우선 배향과 기계적 성질의 연구 = A study of preferred orientation and mechanical properties of sand-cast Mg-9wt%Al-Zn alloyslink

김희중; Kim, Hi-Jung; et al, 한국과학기술원, 1978

1712
산과 염기 용액 처리가 P(VDF-TrFE) Film에 미치는 영향 = Effects of acid and alkali treatment on P(VDF-TrFE) filmslink

김연태; Kim, Yeon-Tae; et al, 한국과학기술원, 2012

1713
산변성형 PE-WAX:중합조건과 물성에 관한 연구 = Maleated polyethylene-wax:preparation conditions and propertieslink

이영진; Lee, Young-Jin; et al, 한국과학기술원, 1997

1714
산화 주석 피막의 전기 전도도 = Electrical conductivity of $SnO_2$ filmlink

이정용; Lee, Jung-Yong; et al, 한국과학기술원, 1976

1715
산화 칼슘에 의해 안정화된 지르코니아의 고온 전기 전도도 = The high Temperature electrical conductivity of CaO-stabilized zirconialink

임영언; Ihm, Yeong-Eon; et al, 한국과학기술원, 1979

1716
산화물 분산 및 석출 강화된 니켈기 초내열합금에서의 γ'-석출물의 조대화 현상에 관한 연구 = A study on morphological changes of γ'-precipitates in oxide dispersion plus gamma prime strengthened Ni-base superalloyslink

김진수; Kim, Jin-Su; et al, 한국과학기술원, 1995

1717
상부 전극 증착 조건이 $Pb(Zr,Ti)O_3$ 박막의 전기적 특성에 미치는 영향 = The effects of deposition conditions of top elctrodes on the electrical properties of $Pb(Zr,Ti)O_3$ thin filmslink

이강운; Lee, Kang-Woon; et al, 한국과학기술원, 1999

1718
상온 RF 반응 스퍼터링법으로 제조한 수소화 비정질 탄화규소 박막의 광학적 성질 및 열처리후 광학적 특성 변화 연구 = A study on the characteristics of the optical properties in as-deposited and post annealed hydrogenated amorphous silicon carbide films prepared by RF reactive sputtering at room temperaturelink

한승전; Han, Seung-Zeon; et al, 한국과학기술원, 1992

1719
상온에서 동(Cu)내의 수소확산에 미치는 냉간가공과 소둔의 영향 = Effect of cold rolling and annealing on the hydrogen diffusion in copper at the ambient temperaturelink

김석수; Kim, Suk-Soo; 변수일; 강석중; et al, 한국과학기술원, 1987

1720
상온에서 순수 Al 의 static creep 과 cyclic creep 변형시 형성된 전위 구조의 비교 = Comparision of the dislocation structures in cyclically and statically crept pure aluminum at 0.33 Tmlink

황우택; Hwang, Woo-Taek; et al, 한국과학기술원, 1983

1721
상온에서 증착한 AZO 박막의 후열처리효과가 전기적, 구조적 특성에 미치는 영향 = Post-annealing effects on the electrical and structural properties of AZO thin films deposited at room temperaturelink

이성환; Lee, Sung-hwan; et al, 한국과학기술원, 2008

1722
상용알루미늄의 저온 Creep 기구에 대한 연구 = Investigation of primary creep deformation mechanism of commercially pure alumium at ambient temperaturelink

진근찬; Chin, Keun-Chan; et al, 한국과학기술원, 1977

1723
상전이 온도 이하에서 수열합성법에 의한 에피텍셜 $PbTiO_{3}$ 박막의 증착과 특성 평가 = Fabrication of the epitaxial $PbTiO_{3}$ thin film by hydrothermal method below $T_{c}$ and its characterizationlink

이홍철; Lee, Hong-Cheol; et al, 한국과학기술원, 2005

1724
상평형 계산을 이용한 beta 티타늄 합금의 상 안정화에 관한 고찰 = Thermodynamic-aided phase stabilization and phase diagram calculation of beta Ti-Cr-V-X (Xlink

이정엽; Lee, Jeong-Yub; et al, 한국과학기술원, 1999

1725
상평형 계산을 통한 $Al-Al_3$(Ti,V,Zr) 복합재료의 합금설계 = Alloy design of $Al-Al_3$(Ti,V,Zr) composite system through phase stability calculationslink

박성일; Park, Seong-Ill; et al, 한국과학기술원, 1996

1726
새로운 고온 수소생성촉매 $Ni_3Al-foil$의 개발 = Development of $Ni_3Al-foil$ as an advanced catalyst for hydrogen production in high temperaturelink

오유진; Oh, Yu-Jin; et al, 한국과학기술원, 2005

1727
생체모사형 인공 청각유모세포 구현을 위한 무기 압전소재 기반의 음향센서 소자 개발 = Development of flexible inorganic piezoelectric acoustic nanosensor for biomimetic artificial hair celllink

이현수; Lee, Hyun-Soo; et al, 한국과학기술원, 2014

1728
석유증발법에 의한 Mn-Zn ferrite 분말의 제조에 관한 연구 = Studies on the preparation of Mn-Zn ferrite powder prepared by hot petroleum drying methodlink

심영재; Shim, Young-Jae; et al, 한국과학기술원, 1978

rss_1.0 rss_2.0 atom_1.0