Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Master)

Showing results 2054 to 2073 of 2170

2054
카본페이스트 전극에서의 산화반응을 이용한 글루코스 센서의 제작 및 특성평가 = Fabrication and characterization of glucose sensor using oxidation reaction on the carbon paste electrodelink

김성완; Kim, Seong-Wan; et al, 한국과학기술원, 2011

2055
컨넥터용 Cu-2.5Ni-0.5Si-X 합금의 석출 특성과 기계적 정질에 미치는 합금원소 Mg와 P의 영향에 대한 연구 = A study on the effects of Mg and P additions on the precipitation characteristic and mechanical properties in Cu-2.5Ni-0.5Si-X alloys for connector applicationslink

서준원; Suh, Jun-Won; et al, 한국과학기술원, 1995

2056
코발트 계열 나노입자와 그래핀 에어로젤 복합체 제조 및 수소 발생 반응 촉매로의 응용에 관한 연구 = Cobalt based nanoparticles / reduced graphene oxide aerogel as hydrogen evolution electrocatalystlink

구성환; 김상욱; et al, 한국과학기술원, 2017

2057
코스퍼터링 $TiSi_2$ 박막의 상변태(C49→C54)와 응력해석 = Phase transformation (C49→C54) of $TiSi_2$ Co-Sputtered thin film and stress analysislink

김종환; Kim, Jong-Hwan; et al, 한국과학기술원, 1997

2058
크리프-피로 상호작용시 AISI 316스테인레스강에서 cavity 생성인자에 미치는 결정립도의 영향 = The effect of grain size on the cavity nucleation factor of AISI 316 stainless steel under creep-fatigue interactionlink

노범욱; Roh, Bum-Wook; et al, 한국과학기술원, 1996

2059
크립-피로 상호작용에 의한 AISI 316 스테인리스강의 손상기구와 수명예측에 관한 연구 = A study on the damage mechanism and life prediction in AISI 316 stainless steel under creep-fatigue interaction conditionlink

최백규; Choi, Baig-Gyu; et al, 한국과학기술원, 1994

2060
타이타늄 내에서의 수소 확산 = The diffusion of hydrogen in titaniumlink

이용태; Lee, Yong-Tai; et al, 한국과학기술원, 1976

2061
탄성 인쇄회로기판 기술을 위한 고분자에서의 전도성 액체금속 네트워크의 보편적 합성 = Universal synthesis of conductive liquid metal network in polymers enabling elastic printed circuit board technologylink

이원범, 한국과학기술원, 2022

2062
탄소 첨가에 따른 WC-12 % Fe-3%Ni 초경합금의 기계적 성질 변화 = Effect of carbon addition on the properties of WC-12 % Fe-3% Ni alloylink

김인응; Kim, In-Eung; et al, 한국과학기술원, 1981

2063
탄소가 3% 규소 강판의 2차 재결정에 미치는 영향 = Effects of carbon on the secondary recrystallization in 3 % silicon steellink

송재성; Song, Jae-Sung; 임호빈; 김영걸; et al, 한국과학기술원, 1982

2064
탄소가 첨가된 TiAl합금의 미세조직제어 = Microstructure control in carbon-doped TiAl alloyslink

김보현; Kim, Bo-Hyun; et al, 한국과학기술원, 1999

2065
탄소나노튜브 페이스트를 이용한 field emitter의 제작 및 구동 중 발생하는 탄소나노튜브의 구조적 변화에 대한 특성 고찰 = Characterization of preparation- and operation-induced structural defects of field emitter based on CNT pastelink

이연주; Lee, Yeon-Ju; et al, 한국과학기술원, 2007

2066
탄소나노튜브를 이용한 3차원 구조 전계방출에미터의 제조 및 특성 연구 = Fabrication and Characterization of 3D Structure Field Emitter using Carbon Nanotubelink

황재원; Hwang, Jae-Won; et al, 한국과학기술원, 2009

2067
탄소와 황이 W-Ni-Fe 중합금의 취성에 미치는 영향 = The embrittling effect of carbon and sulfur in W-Ni-Fe heavy alloylink

이영종; Lee, Yong-Jong; et al, 한국과학기술원, 1987

2068
탄화 공정으로 합성한 탄소계 다공성 구체에 관한 연구 : 크기별 특성과 수소저장특성 = A study on the porous carbon nitride spheres synthesized by carbonization process : the size distribution effect and hydrogen storage propertieslink

허승준; Heo, Seung-Jun; et al, 한국과학기술원, 2011

2069
탄화 공정으로 합성한 탄소계 다공성 구체에 관한 연구 : 크기별 특성과 수소저장특성 = A study on the porous carbon nitride spheres synthesized by carbonization process : the size distribution effect and hydrogen storage propertieslink

허승준; Heo, Seung-Jun; et al, 한국과학기술원, 2011

2070
탄화 규소의 산화와 고온 부식에 미치는 알루미나와 이트리아 소결 조제의 영향 = The effects of alumina and yttria as sintering aids on the oxidation and hot corrosion of silicon carbidelink

박성철; Park, Sung-Chul; et al, 한국과학기술원, 1997

2071
탄화규소 단섬유 강화 질화규소 기지 복합재료의 소결 및 기계적 특성에 관한 연구 = A study on the sintering and mechanical properties of SiC whisker reinforced $Si_3N_4$ matrix compositeslink

고상철; Koh, Sang-Cheol; et al, 한국과학기술원, 1989

2072
탄화규소의 활성화 소결 = Reactive sintering of Siclink

김영욱; Kim, Young-Wook; et al, 한국과학기술원, 1983

2073
탑 코트 방법을 이용한 PS-b-P2VP 나노구조 제어에 관한 연구 = Top coat approach for control of PS-b-P2VP nanostructureslink

이재은; 김상욱; et al, 한국과학기술원, 2016

rss_1.0 rss_2.0 atom_1.0