DC Field | Value | Language |
---|---|---|
dc.contributor.author | 정종엽 | ko |
dc.contributor.author | 임용택 | ko |
dc.contributor.author | 홍성철 | ko |
dc.contributor.author | 이주강 | ko |
dc.date.accessioned | 2009-12-16T06:55:47Z | - |
dc.date.available | 2009-12-16T06:55:47Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1998-01 | - |
dc.identifier.citation | 대한기계학회논문집 A, v.22, no.9, pp.1625 - 1638 | - |
dc.identifier.issn | 1226-4873 | - |
dc.identifier.uri | http://hdl.handle.net/10203/15067 | - |
dc.description.abstract | In this study, a fuzz system for more accurate control of rolling force set-up was developed to improve the thickness control at the finishing rolling units in hot rolling. Through the analysis of real production data it was found that the accuracy of the rolling force determined from the finishing mill set-up(FSU) model dominantly governed the thickness uniformity in rolled plates at the front. Based on this analysis, the major processing parameters mostly relevant in determining the measured load data in the FSU model were selected and used as input and output variables for the currently developed fuzzy system. The input and output variables of the developed fuzzy rules were determined from a correlation study of the hot rolling process data. A linear function between rolling force and the chosen process variables was introduced in the present study for development of the fuzzy rules in the, finishing mill stands such as F4, F5, F6, and F7. The coefficients involved with the fuzzy rules for these stands were determined by applying the regression method to treat the production data. According to the simulation results in the cases with large thickness errors, it was found that the developed fuzzy system produced better load predictions at the finishing mill, especially at the last 7th stand, than the load values provided by the FSU model. | - |
dc.description.sponsorship | 본 연구의 수행에 많은 도움을 주신 포항제철 기술연구소 여러분께 깊이 감사드립니다. | en |
dc.language | Korean | - |
dc.language.iso | ko | en |
dc.publisher | 대한기계학회 | - |
dc.title | 열연공정의 선단부 압연하중 설정용 퍼지시스템 | - |
dc.title.alternative | Fuzzy System for Rolling Load Prediction in Hot Rolling | - |
dc.type | Article | - |
dc.subject.alternative | Hot Rolling | en |
dc.subject.alternative | Finishing Mill Set-up(FSU) | en |
dc.subject.alternative | Rolling Load | en |
dc.subject.alternative | Fuzzy system | en |
dc.type.rims | ART | - |
dc.citation.volume | 22 | - |
dc.citation.issue | 9 | - |
dc.citation.beginningpage | 1625 | - |
dc.citation.endingpage | 1638 | - |
dc.citation.publicationname | 대한기계학회논문집 A | - |
dc.embargo.liftdate | 9999-12-31 | - |
dc.embargo.terms | 9999-12-31 | - |
dc.contributor.localauthor | 임용택 | - |
dc.contributor.nonIdAuthor | 정종엽 | - |
dc.contributor.nonIdAuthor | 홍성철 | - |
dc.contributor.nonIdAuthor | 이주강 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.