DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이성욱 | - |
dc.contributor.author | 조종래 | - |
dc.contributor.author | 양동열 | - |
dc.date.accessioned | 2009-12-16T05:44:14Z | - |
dc.date.available | 2009-12-16T05:44:14Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2008 | - |
dc.identifier.citation | 한국소성가공학회 2008년도 춘계학술대회, v., no., pp.531 - 534 | - |
dc.identifier.uri | http://hdl.handle.net/10203/15045 | - |
dc.description.abstract | A new forming process of the large-size forging within the limit of forming loads is developed by introducing the drawing process, which usually used to apply to sheet forming. For the development of the forming process, corresponding numerical simulation are carried out. The approach is based on the Taguchi method, and utilize the DOE for design of FEM analyses. In this study, the important factors are chosen at first, and then the concept of signal-to-nose(S/N) rate is applied to evaluate the formability of large size forging-products, and each value of the design parameter is determined. | - |
dc.language | KOR | - |
dc.language.iso | ko | en |
dc.publisher | 한국소성가공학회 | - |
dc.title | 드로잉 공정을 이용한 대형 반구 형상 제작에 관한 연구 | - |
dc.title.alternative | Use of a Drawing Process to Manufacture a Large-Size Dome Shaped Forging-Produts | - |
dc.type | Conference | - |
dc.type.rims | CONF | - |
dc.citation.beginningpage | 531 | - |
dc.citation.endingpage | 534 | - |
dc.citation.publicationname | 한국소성가공학회 2008년도 춘계학술대회 | - |
dc.identifier.conferencecountry | South Korea | - |
dc.identifier.conferencecountry | South Korea | - |
dc.contributor.localauthor | 양동열 | - |
dc.contributor.nonIdAuthor | 이성욱 | - |
dc.contributor.nonIdAuthor | 조종래 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.