Browse "Dept. of Aerospace Engineering(항공우주공학과)" by Type Thesis(Ph.D)

Showing results 590 to 605 of 605

590
항공기 생존성 향상을 위한 후방동체 온도 저감 및 IR 신호 연구 = Investigation of ir signature and temperature reduction of the rear fuselage for an aircraft survivabilitylink

이경주; Yi, Kyung-joo; et al, 한국과학기술원, 2014

591
항공기 익형 공력특성 향상을 위한 유동제어 기법에 관한 수치적 연구 = Numerical study about a flow control mechanism for the enhancement of aerodynamic characteristics of 2-D airfoilslink

최성윤; Choi, Sung-Yoon; et al, 한국과학기술원, 2008

592
항공우주시스템용 직접 NaBH4/H2O2 연료전지의 개발 및 검증 = Development and validation of direct NaBH4/H2O2 fuel cell for aerospace systemlink

오택현; Oh, Taek-Hyun; et al, 한국과학기술원, 2013

593
헬리콥터 로터의 후류 형상 및 성능 예측을 위한 순차적 시간 적분 자유 후류법 개발 = Development of a time-marching free-wake method for the prediction of helicopter rotor wake geometry and performancelink

라선욱; Na, Seon-Uk; et al, 한국과학기술원, 1998

594
헬리콥터 무힌지 로터시스템의 복합재료 적용을 통한 구조동역학 특성 향상에 대한 실험적 연구 = An experimental study on structural dynamic characteristics improvement by applying composite materials to the helicopter hingeless rotor systemlink

김덕관; Kim, Deog-Kwan; et al, 한국과학기술원, 2011

595
형상 기억 합금 작동기를 이용한 가변 형상 날개 개발 및 형상 제어 = Development of morphing wing and shape control using shape memory alloy actuatorlink

임미선; Rim, Mi-Sun; et al, 한국과학기술원, 2014

596
형상기억합금 기반 가변 강성 메쉬 절연계 개발 = Development of stiffness tunable mesh isolator based on shape memory alloylink

정호경; Jeong, Ho-Kyeong; et al, 한국과학기술원, 2014

597
형상기억합금 의탄성 효과 기반 파이로 충격 저감용 메쉬 절연계 개발 = development of pyroshock mesh isolator based on SMA pseudoelasticitylink

윤세현; Youn, Se-Hyun; et al, 한국과학기술원, 2010

598
형상기억합금 작동기를 이용한 스마트 구조의 형상 제어에 관한 연구 = A study on shape control of smart structures using shape memory alloy actuatorslink

양승만; Yang, Seung-Man; et al, 한국과학기술원, 2005

599
회전익-고정익 상호간섭 및 블레이드 진동의 영향이 있는 축류 압축기내에서의 비정상 천음속 유동 = Unsteady transonic axial-compressor flow under the effect of rotor-stator interaction or blade vibrationlink

강인모; Kang, In-Mo; et al, 한국과학기술원, 1991

600
효율적인 SMA 모델링 및 SMAHC의 동적/음향 특성 = Effective SMA Modeling and Dynamic/Acoustic Characteristics of SMAHClink

강명구; Kang, Myung-Koo; et al, 한국과학기술원, 2011

601
후류 효과를 고려한 헬리콥터 로터 블레이드의 공탄성 특성 = Wake effects on aeroelastic characteristics of helicopter rotor bladeslink

유승재; Yoo, Seung-Jae; et al, 한국과학기술원, 2011

602
후판 곡면 복합재 구조물의 레이저 초음파 검사를 위한 회전식 스캐닝 기법 = Rotational scanning method for laser ultrasonic inspection of thick and curved composite structurelink

이영준; 이정률; et al, 한국과학기술원, 2019

603
후향 계단에서 재부착하고 재전개하는 2차원 비압축성 흐름 해석 = Analysis for two-dimensional incompressible reattaching and redeveloping flow behind a rearward-facing steplink

김성초; Kim, Sung-Ch'o; 박승오; 장극; et al, 한국과학기술원, 1989

604
흐름방향 압력구배가 후방계단 뒤 난류 재부착흐름에 미치는 영향에 대한 실험적 연구 = An experimental investigation of the effects of streamwise pressure gradients on a turbulent reattaching flow downstream od rearward-facing steplink

라승호; Ra, Seung-Ho; 박승오; 장극; et al, 한국과학기술원, 1990

605
흡입구 연료분사 방식 스크램제트 엔진의 연료-공기 혼합 및 성능 특성에 대한 수치적 연구 = Numerical investigation of fuel-air mixing and performance characteristics in an Inlet-fueled scramjet enginelink

김재원; 권오준; et al, 한국과학기술원, 2018

Discover

Type

. next

Open Access

Date issued

. next

Subject

. next

rss_1.0 rss_2.0 atom_1.0