Browse "Dept. of Aerospace Engineering(항공우주공학과)" by Type Thesis(Master)

Showing results 632 to 651 of 948

632
사다리꼴 단면 항력 계수 측정 = Drag measurements of cylinders having trapezoidal cross-sectionlink

고범용; Koh, Bum-Yong; et al, 한국과학기술원, 1998

633
사출 성형에 의해 제작된 다중벽 탄소 나노튜브/PMMA 복합재의 기계적 물성에 관한 연구 = A study on mechanical properties of MWNT/PMMA composites fabricated by injection molding processlink

이원준; Lee, Won-Jun; et al, 한국과학기술원, 2004

634
삼각형의 단면 굴곡을 갖는 반무한 표면 위에서의 3차원 층류 경계층 유동 = Three-dimensional laminar boundary layer flow over a semi-infinite surface with linerarly-corrugated cross-sectionlink

오정권; Oh, Jeong-Kwon; et al, 한국과학기술원, 1982

635
상대운동이 있는 물체주위의 유동장 해석을 위한 적응격자기법 연구 = A study of adaptive refinement method for analysis of the flow field around bodies with relative motionlink

김대희; Kim, Dae-Hee; et al, 한국과학기술원, 2000

636
상용 항공기 좌석 경량화를 위한 소재 대체 설계 기술 연구 = (A) study on material substitution design method for weight reduction of commercial aircraft passenger seatlink

이상훈; 김천곤; et al, 한국과학기술원, 2017

637
상호작용하는 두 스월 안정화 화염의 연소불안정 제어를 위한 대칭성 붕괴 기법 = Symmetry-breaking for the control of combustion instabilities of two interacting swirl-stabilized flameslink

김대건; 김규태; et al, 한국과학기술원, 2018

638
샌드위치 구조를 갖는 전자기파 흡수체에 관한 연구 = A study on electromagnetic wave absorbing sandwich structureslink

박기연; Park, Ki-Yeon; et al, 한국과학기술원, 2004

639
샌드위치구조를 이용한 충격손상방지 구조물 = Impact damage protection in composite structure using sandwich structure conceptlink

김성준; Kim, Sung-Joon; et al, 한국과학기술원, 1994

640
석탄 입자와 공기 혼합물에서의 화염 전파에 관한 연구 = A study on flame propagation through a mixture of coal particles and airlink

윤길원; Yun, Gil-Won; et al, 한국과학기술원, 1987

641
선형 격자 형성 방정식을 이용한 직교 격자 형성에 관한 연구 = Orthogonal grid generation using linear grid generating equationslink

이상욱; Lee, Sang-Wook; et al, 한국과학기술원, 2000

642
선형 비연관 방정식과 등각 변환법을 이용한 3차원 격자 구성 기법 연구 = A study on 3-dimensional grid generation using linear uncoupled equations and conformal transformationlink

김재욱; Kim, Jae-Wook; et al, 한국과학기술원, 1999

643
선형 안정성 이론을 이용한 압축성 축 대칭 원뿔 경계층의 천이 지점 예측 = Transition predicton of compressible axi-symmetric boundary layers on a sharp cone by using linear stability theorylink

박동훈; Park, Dong-Hoon; et al, 한국과학기술원, 2008

644
선회화염의 유동장 특성에 관한 실험적 연구 = An experimental study on the flow field of the swirling flamelink

민대기; Min, Dai-Ki; et al, 한국과학기술원, 1985

645
섬유방향 파손이 있는 [90n/0m]s 복합적층판의 층간분리 = Delamination of [90n/0m]s laminate with transverse cracklink

이세영; Lee, Se-Yong; et al, 한국과학기술원, 1988

646
성능과 소음을 고려한 축류팬의 설계 프로그램 개발 = Development of axial fan design program considering performance and noiselink

김병주; Kim, Byung-Joo; et al, 한국과학기술원, 2004

647
수동형 호우밍 미사일의 요격성능 향상을 위한 적응 단속기동 = Adaptive intermittent maneuvers for intercept performance improvement of passive homing missilelink

류혁; Ryu, Hyeok; et al, 한국과학기술원, 1991

648
수정된 ENF 시편을 이용한 복합재료 혼합 모우드 층간파괴인성치 평가 = Evaluation of mixed mode interlaminar fracture toughness of composites by modified ENF specimenlink

정안균; Jeong, An-Kyun; et al, 한국과학기술원, 1990

649
수정된 Random vortex method 를 이용한 난류유동의 수치적 해석 = Numerical simulation of turbulent flow behind a bluff body using a modified random vortex methodlink

하지수; Ha, Ji-Soo; et al, 한국과학기술원, 1985

650
수직발사체의 초기 안정성 및 제어에 관한 연구 = A study on the initial stability and control of a launch vehiclelink

박영웅; Park, Young-Woong; et al, 한국과학기술원, 1995

651
수치 최적화 기법을 이용한 풍력 터빈 블레이드 단면의 공력 최적 설계 = Aerodynamic sectional design optimization for wind turbine rotor blades by a numerical optimization techniquelink

권형일; Kwon, Hyung-Il; et al, 한국과학기술원, 2011

Discover

Type

. next

Open Access

Date issued

. next

Subject

. next

rss_1.0 rss_2.0 atom_1.0