Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Thesis(Ph.D)

Showing results 1161 to 1180 of 1858

1161
궤적 민감도를 이용한 제어기 설계 및 차량 시스템에의 응용 = Controller design with trajectory sensitivity minimization and its application to vehicle systemslink

임성진; Yim, Seong-Jin; et al, 한국과학기술원, 2007

1162
균열선단 전개형상을 고려한 한쪽 면 보강시의 피로균열 거동에 관한 연구 = A study on the fatigue behavior of single-sided repairs considering crack front evolutionlink

이우용; Lee, Woo-Yong; et al, 한국과학기술원, 2005

1163
그루브가 가공된 스풀밸브의 윤활특성 연구 = A study on the lubrication characteristics of spool-type valve with groovelink

홍성호; Hong, Sung-Ho; et al, 한국과학기술원, 2013

1164
그루브를 이용한 표면형상변형을 통한 동특성 변경법 : 고유진동수 증대관점 = Structural dynamics modification using surface grooving technique : on the aspect of raising natural frequencies of a structurelink

박미유; Park, Mi-You; et al, 한국과학기술원, 2006

1165
극저온 냉동기용 재생기의 압력강하 특성에 대한 연구 및 고효율 재생기의 개발 = Investigation of pressure drop characteristics for cryocooler regenerators and development of high efficient regeneratorlink

남관우; Nam, Kwan-Woo; et al, 한국과학기술원, 2004

1166
극초단파를 이용한 탄소나노튜브의 분리와 나노전자소자 제작에 관한 연구 = A study on the separation of carbon nanotube using microwave and fabrication of nano-scale electronic devicelink

김용신; Kim, Yong-Shin; et al, 한국과학기술원, 2011

1167
극초단펄스 레이저의 편광과 시간 지연에 의한 금속 박막의 미세제거 특성에 관한 연구 = A study on micro-ablation characteristics of metal films with polarized and time-delayed ultrafast laser pulseslink

김재구; Kim, Jae-Gu; et al, 한국과학기술원, 2007

1168
근접장 광자기 기록장치의 픽업 헤드 해석과 광학적 오차 보상에 관한 연구 = A study on pickup head and optical error compensation in magneto-optic near-field recording systemlink

오형렬; Oh, Hyeong-Ryeol; et al, 한국과학기술원, 2002

1169
금속 박판의 레이저 브레이징 공정 자동화 및 쾌속 시작 금형에의 응용에 관한 연구 = A study on the automation of laser brazing process and its application to rapid laminate toolinglink

윤석환; Yoon, Suk-Hwan; et al, 한국과학기술원, 2004

1170
금속/세라믹 브레이징 접합부의 잔류 응력 해석과 잔류응력 감소방법에 관한 연구 = A study on analysis of residual stress and its reduction method in metal/ceramic brazed jointslink

김원배; Kim, Weon-Bae; et al, 한국과학기술원, 1995

1171
금속산화물의 광열화학반응을 이용한 박막트랜지스터 가공 리페어 공정에 관한 연구 = A study on TFT manufacturing repair process using a photo-thermo-chemical reaction of metal oxideslink

이후승; Lee, Hu Seung; et al, 한국과학기술원, 2015

1172
기계 부품용 DLC 코팅의 마찰 및 마모 특성에 관한 연구 = A study on friction and wear characteristics of DLC coating used for machine elementslink

김동욱; Kim, Dong-Wook; et al, 한국과학기술원, 2012

1173
기상측정을 위한 고진동 둔감 특성 광섬유 점회절 간섭계 = Large vibration-desensitized fiber-optic point-diffraction interferometer for on-machine measurementlink

권택민; Kwon, Taek-Min; et al, 한국과학기술원, 2011

1174
기어감속형 짐발시스템의 백래시 추정방법 및 주파수응답특성에 미치는 백래시 영향에 관한 연구 = A study on the backlash estimation of gimbal system with gear reducers and the backlash influence to frequency response characteristicslink

백주현; Baek, Joo-Hyun; et al, 한국과학기술원, 2002

1175
기저 구조물과 부가 구조물 사이에 불일치 절점이 있는 경우의 구조물 동특성 변경법 = Structural dynamics modification for the case of having non-matching nodes between base and modification structureslink

정의일; Jung, Eui-Il; et al, 한국과학기술원, 2005

1176
기체주입 노즐의 내부 유동특성 및 미립화 성능에 관한 연구 = Study of internal flow characteristics and atomization performance of effervescent atomizerslink

김주연; Kim, Joo-Youn; et al, 한국과학기술원, 2000

1177
나노구조체 전극을 이용한 고성능 에너지저장소자 제작에 관한 연구 = (A) study on fabrication of high-performance energy storage devices using nanostructured electrodelink

이재학; 양민양; et al, 한국과학기술원, 2018

1178
나노구조체에 의해 생성된 전기장 증폭과 극자외선 특성 연구 = A study on characteristics of field enhancement and EUV light generated by nanostructureslink

이동협; Lee, Dong-Hyub; et al, 한국과학기술원, 2014

1179
나노구조체의 전기장 증폭에 의한 극자외선 생성 연구 = A study on EUV generation by plasmonic field enhancement using nanostructureslink

한승회; Han, Seunghwoi; et al, 한국과학기술원, 2016

1180
나노제조 공정용 열가소성 폴리머 필름의 점착 및 마찰 거동에 관한 연구 = A study on adhesion and friction behavior of thermoplastic polymer film for nanofabrication processlink

김광섭; Kim, Kwang-Seop; et al, 한국과학기술원, 2008

rss_1.0 rss_2.0 atom_1.0