Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Thesis(Ph.D)

Showing results 761 to 780 of 1858

761
Optical fiber coupled displacement probe with a new compensation method for surface measurement = 표면측정에 적용할 수 있는 새로운 보상법이 적용된 광섬유 변위 센서link

Kim, Boung-Jun; 김병준; Kwak, Yoon-Keun; Louis Flamand; et al, 한국과학기술원, 2003

762
Optical separation of elastic capsules in a viscous flow = 유동 내에서 광력을 이용한 유연한 캡슐의 분리에 대한 연구link

Chang, Cheong-Bong; 장정봉; et al, 한국과학기술원, 2013

763
Optimal design of nature-inspired structures with machine learning and theoretical analysis = 기계학습 및 이론분석을 통한 자연 모사 구조물의 최적화link

Kim, Yongtae; Ryu, Seunghwa; et al, 한국과학기술원, 2022

764
Optimal structural dynamics modificationb using frequency response function synthesis and its applications = 주파수 응답 함수 결합을 이용한 최적 구조 변경법 및 응용link

Park, Yong-Hwa; 박용화; et al, 한국과학기술원, 1999

765
Optimization of a microchannel heat sink using three-dimensional analysis = 3차원 수치 해석을 통한 마이크로채널 히트싱크의 최적화link

Ryu, Je-Hyoung; 류제형; et al, 한국과학기술원, 2002

766
Optimization-based approaches in computer vision = 컴퓨터 비전에서의 최적화 기반 기법link

Kang, Dong-Joong; 강동중; et al, 한국과학기술원, 1999

767
Optimum vibration control of distributed parameter rotor bearing systems by using electromagnetic bearing = 전자석 베어링을 이용한 회전체 베어링계의 최적 진동제어link

Kim, Jong-Sun; 김종선; et al, 한국과학기술원, 1989

768
Opto-acoustic droplet manipulation in a micro channel = 광력과 음향력을 이용한 미세 채널에서의 액적의 제어link

Jung, Jinho; Sung, Hyung Jin; et al, 한국과학기술원, 2018

769
Organized large-scale structures in the turbulent open cavity flows = 열린 공동 내 난류 유동의 조직적 구조link

Abu, Seena; Abu, Seena; et al, 한국과학기술원, 2012

770
Organized self-sustained oscillations of turbulent flows over an open cavity = 열린 공동 내 난류 유동의 조직적 자려 진동link

Lee, Sang-Bong; 이상봉; et al, 한국과학기술원, 2008

771
Oxidation suppression of copper nanowire percolation network in ambient condition by ultrafast plasmonic laser nanowelding for flexible transparent conductor = 상온에서의 플라즈모닉 레이저 소결을 통한 구리 나노와이어 산화 억제 공정 개발 및 유연한 투명 전극 제작에 관한 연구link

Han, Seung-Yong; 한승용; Yang, Min-Yang; 양민양; et al, 한국과학기술원, 2014

772
P-L-N 디젤 분사계의 개변압에 따른 연료 미립화 특성 변화 = Variation of fuel atomization characteristics with opening pressure of P-L-N diesel injection systemlink

이장희; Lee, Jang-Hee; et al, 한국과학기술원, 2003

773
Partially spatial coherent thermal emitter based on epsilon-and-mu-near-zero metamaterial = 0의 유전율과 투자율을 갖는 메타물질로 구현된 부분적으로 공간 결맞은 열방사체link

Kang, Byungsoo; Min, Bumki; et al, 한국과학기술원, 2020

774
Particle emissions in a turbocharged gasoline direct injection engine under Atkinson cycle operation through late intake valve closure = 터보과급 직접분사식 가솔린 엔진에서의 늦은 흡기 밸브 닫힘 전략 (LIVC)을 통한 Atkinson Cycle의 미세먼지 배출 특성link

Shin, Ji Yong; Bae, Choongsik; et al, 한국과학기술원, 2022

775
Particle separation using radiation force = 광력을 이용한 입자 분리에 관한 연구link

Kim, Sang-Bok; 김상복; et al, 한국과학기술원, 2008

776
Particle transport and deposition from non-isothermal gas-particle flows = 비등온 기체-입자 유동에서 입자전달 및 부착현상에 관한 연구link

Kim, Yong-Jin; 김용진; et al, 한국과학기술원, 1991

777
Particle transport and deposition in high temperature gas-particle two-phase tube flow with thermal radiation = 고온 기체-입자 관유동에서 복사가 수반된 입자의 이동 및 부착현상link

Park, Sung-Ho; 박성호; et al, 한국과학기술원, 1993

778
Passage dependent responses of chondrocytes to mechanical stimulation = 정상 연골세포와 탈분화 된 연골세포 간의 기계적 자극에 대한 반응성의 차이에 대한 연구link

Shin, Hyun Jun; 신현준; et al, 한국과학기술원, 2015

779
PC-NC를 이용한 와이어컷 방전가공기의 수치제어장치에 관한 연구 = A study on the PC-NC based CNC controller for wire-cut EDMlink

박진호; Park, Jin-Ho; et al, 한국과학기술원, 2001

780
Perfomance enhancement of single/dual chamber pneumatic vibration isolation systems by input-output linearization and time delay control = 입-출력 선형화 기법과 시간지연 제어기법을 이용한 싱글/듀얼 챔버 공압 제진대의 성능 향상에 관한 연구link

Han, Dong-Ki; 한동기; et al, 한국과학기술원, 2010

rss_1.0 rss_2.0 atom_1.0