Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Article

Showing results 361 to 420 of 12217

361
A microstructure evolution model for numerical prediction of austenite grain size distribution

Jung, KH; Lee, HW; Im, Yong-Taek, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.52, no.9, pp.1136 - 1144, 2010-09

362
A microwave foaming method for fabricating glass fiber reinforced phenolic foam

Choe, Jaeheon; Kim, Minkook; Kim, Jinwhan; Lee, Dai Gil, COMPOSITE STRUCTURES, v.152, pp.239 - 246, 2016-09

363
A millimeter-range flexure-based nano-positioning stage using a self-guided displacement amplification mechanism

Kim, Jung-Jae; Choi, Young-Man; Ahn, Da-Hoon; Hwang, Beom-Seok; Gweon, Dae-Gab; Jeong, Jae-Hwa, MECHANISM AND MACHINE THEORY, v.50, pp.109 - 120, 2012-04

364
A Mini Review of Recent Advances in Optical Pressure Sensor

Lee, Gihun; Kim, Hyunjin; Park, Inkyu, Journal of Sensor Science and Technology, v.32, no.1, pp.22 - 30, 2023-01

365
A miniature magneto-rheological actuator with an impedance sensing mechanism for haptic applications

Yang, Tae-Heon; Koo, Jeong-Hoi; Kim, Sang-Youn; Kwon, Dong-Soo, JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, v.25, no.9, pp.1054 - 1061, 2014-06

366
A mixed element based on Lagrange multiplier method for modified couple stress theory

Kwon, Young Rok; Lee, Byung-Chai, COMPUTATIONAL MECHANICS, v.59, no.1, pp.117 - 128, 2017-01

367
A Mobile Cable-Tensioning Platform to Improve Crouch Gait in Children With Cerebral Palsy

Cho, Seongyun; Lee, Kun-Do; Park, Hyung-Soon, IEEE TRANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING, v.30, pp.1092 - 1102, 2022-05

368
A Mobile Gait Monitoring System for Abnormal Gait Diagnosis and Rehabilitation: A Pilot Study for Parkinson Disease Patients

Bae, Joonbum; Kong, Kyoungchul; Byl, Nancy; Tomizuka, Masayoshi, JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, v.133, no.4, 2011-04

369
A Mobile Motion Capture System Based on Inertial Sensors and Smart Shoes

Jung, Pyeong-Gook; Oh, Sehoon; Lim, Gukchan; Kong, Kyoungchul, JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, v.136, no.1, 2014-01

370
A Mobile Two-Dimensional Ultrasound Focusing System for Personalized Healthcare Applications through a Dodecagonal Quasicrystal Patterned Planar Lens

Jeong, Yongrok; Kang, Hyeok-jung; Bok, Moonjeong; Hwang, Soon Hyoung; Jeon, Sohee; Ahn, Junseong; Ha, Ji-Hwan; et al, ADVANCED MATERIALS TECHNOLOGIES, v.8, no.16, 2023-08

371
A model for sound propagation in capillary ducts with mean flow

Ih, Jeong-Guon; Park, CM; Kim, HJ, JOURNAL OF SOUND AND VIBRATION, v.190, no.2, pp.163 - 175, 1996-02

372
A model for the decay of rotating homogeneous turbulence

Chung, Myung Kyoon, PHYSICS OF FLUIDS, v.11, no.6, pp.1544 - 1549, 1999-07

373
A model of acoustic impedance of perforated plates with bias flow considering the interaction effect

Lee, SH; Ih, Jeong-Guon; Peat, KS, JOURNAL OF SOUND AND VIBRATION, v.303, no.3-5, pp.741 - 752, 2007-06

374
A model on water level dynamics in natural circulation drum-type boilers

Kim, H; Choi, Sangmin, INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, v.32, no.6, pp.786 - 796, 2005-05

375
A Model Predictive Control for Path Tracking of Electronic-Four-Wheel Drive Vehicles

Park, Giseo; Choi, Seibum B., IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, v.70, no.11, pp.11352 - 11364, 2021-11

376
A model reference observer for time-delay control and its application to robot trajectory control

Chang P.H.; Lee J.W.; Chang P.H., IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, v.4, no.1, pp.2 - 10, 1996

377
A modeling study of mechanical energetic optimality in incline walking

Oh, Keonyoung; Ryu, Jae-Kwan; Park, Sukyung, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.28, no.4, pp.1393 - 1401, 2014-04

378
A Modification of the C Integral Considering the Effect of Crack Growth

y.h.choi; c.m.pang; y.y.earmme; j.h.song, 대한기계학회논문집 A, v.13, no.1, pp.77 - 86, 1989

379
A modified perturbation/correlation method for force-guided assembly

Oh, Jaesung; Oh, Jun-Ho, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.29, no.12, pp.5437 - 5446, 2015-12

380
A modified Petviashvili method using simple stabilizing factors to compute solitary waves

Cho, Yeunwoo, JOURNAL OF ENGINEERING MATHEMATICS, v.91, no.1, pp.37 - 57, 2015-04

381
A modified selective precision synthesis technique for planar four-bar rigid-body guidance

Kim, KY; Kwak, Byung Man, JOURNAL OF MECHANICAL ENGINEERING SCIENCE, v.209, no.0, pp.39 - 47, 1995-08

382
A modified theory for the flow mechanism in a regenerative flow pump

Song, JW; Engeda, A; Chung, Myung Kyoon, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, v.217, no.A3, pp.311 - 321, 2003-06

383
A modulus-engineered multi-layer polymer film with mechanical robustness for the application to highly deformable substrate platform in stretchable electronics

Kim, Youson; Kim, Junmo; kim, chanyoung; Kim, Taehyun; Lee, Chungryeol; Jeong, Kihoon; Jo, Woosung; et al, CHEMICAL ENGINEERING JOURNAL, v.431, no.2, 2022-03

384
A Motion Similarity Measurement Method of Two Mobile Devices for Safety Hook Fastening State Recognition

Song, Kyu-Seob; Kang, Sangseung; Lee, Dong-Guw; Nho, Young-Hoon; Seo, Ji-Seok; Kwon, Dong-Soo, IEEE ACCESS, v.10, pp.8804 - 8815, 2022

385
A multi-director continuum beam finite element for efficient analysis of multi-layer strand cables

Kim, Hyo-Jin; Lee, Dong-Hwa; Yoon, Kyungho; Lee, Phill-Seung, COMPUTERS & STRUCTURES, v.256, 2021-11

386
A multi-junction-based near-field solar thermophotovoltaic system with a graphite intermediate structure

Song, Jaeman; Choi, Minwoo; Yang, Zhimin; Lee, Jungchul; Lee, Bong Jae, APPLIED PHYSICS LETTERS, v.121, no.16, 2022-10

387
A multi-user selective Undo/Redo approach for collaborative CAD systems

Yuan Cheng; Fazhi He; Bin Xu; Han, Soonhung; Xiantao Cai; Yilin Chen, Journal of Computational Design and Engineering, v.1, no.2, pp.103 - 115, 2014-04

388
A multichannel visualization module for virtual manufacturing

Kim, Yong-Sik; Yang, Jeongsam; Han, Soonhung, COMPUTERS IN INDUSTRY, v.57, no.7, pp.653 - 662, 2006-09

389
A multiple-shape memory polymer-metal composite actuator capable of programmable control, creating complex 3D motion of bending, twisting, and oscillation

Shen, Qi; Trabia, Sarah; Stalbaum, Tyler; Palmre, Viljar; Kim, Kwang; Oh, Il-Kwon, SCIENTIFIC REPORTS, v.6, no.-, 2016-04

390
A multiplicative plastic hardening model in consideration of strain softening and strain rate: Theoretical derivation and characterization of model parameters with simple tension and creep test

Kim, Hyunki; Yoon, Jeong Whan; Chung, Kwansoo; Lee, Myoung-Gyu, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.187, 2020-12

391
A musculoskeletal lumbar and thoracic model for calculation of joint kinetics in the spine

Kim, Yongcheol; Ta, Ducmanh; Jung, Moonki; Koo, Seungbum, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.30, no.6, pp.2891 - 2897, 2016-06

392
A nanometric displacement measurement method using the detection of fringe peak movement

Yi, JH; Kim, Soohyun; Kwak, Yoon Keun, MEASUREMENT SCIENCE TECHNOLOGY, v.11, no.9, pp.1352 - 1358, 2000-09

393
A nanophotonic solar thermophotovoltaic device

Lenert, Andrej; Bierman, David M.; Nam, Youngsuk; Chan, Walker R.; Celanovic, Ivan; Soljacic, Marin; Wang, Evelyn N., NATURE NANOTECHNOLOGY, v.9, no.2, pp.126 - 130, 2014-02

394
A nanoradio utilizing the mechanical resonance of a vertically aligned nanopillar array

Lee, Chang Hwa; Lee, Seok Woo; Lee, Seung Seob, NANOSCALE, v.6, no.4, pp.2087 - 2093, 2014

395
A Narrow-Linewidth On-Chip Toroid Raman Laser

Lu, Tao; Yang, Lan; Carmon, Tal; Min, Bumki, IEEE JOURNAL OF QUANTUM ELECTRONICS, v.47, no.3, pp.320 - 326, 2011-03

396
A natural frequency sensitivity-based stabilization in spectral stochastic finite element method for frequency response analysis

Lee, Gil-Yong; Jin, Seung-Seop; Park, Yong-Hwa, STRUCTURAL ENGINEERING AND MECHANICS, v.75, no.3, pp.311 - 325, 2020-08

397
A near-field approach to active control of sound radiation from a fluid-loaded rectangular plate

Lee, HK; Park, Youn-sik, JOURNAL OF SOUND AND VIBRATION, v.196, no.5, pp.579 - 593, 1996-10

398
A near-infrared confocal scanner

Lee, Seungwoo; Yoo, Hongki, MEASUREMENT SCIENCE AND TECHNOLOGY, v.25, no.6, 2014-06

399
A Neural Net-based Assembly Algorithm for Flexible Parts Assembly

KIM, J. Y.; Cho, Hyungsuck, JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS, v.29, no.2, pp.133 - 160, 2000-03

400
A neural network approach based on interference pattern analysis: Application to an autoalignment method for the focusing unit of NFR system

Yoon, HK; Gweon, Dae-Gab; Lee, JH; Jeong, J; Oh, HR, JAPANESE JOURNAL OF APPLIED PHYSICS, v.43, no.7B, pp.4790 - 4794, 2004-07

401
A neural network approach to estimate the top speed and trainset configuration of a high-speed train

Lee, J; Han, Soonhung, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT, v.218, no.1, pp.41 - 49, 2004-03

402
A neural network approach to Gaussian image based solder joint inspection

Y.K. Ryu; Cho, Hyungsuck, MECHATRONICS, v.7, no.2, pp.159 - 184, 1997

403
A neural network approach to the modelling and analysis of stereolithography processes

Lee, S.H.; Park, W. S.; Cho, Hyungsuck; Zhang, W.; Leu, M. C., PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, v.215, no.12, pp.1719 - 1733, 2001-12

404
A Neural Network Model for Material Degradation Detection and Diagnosis Using Microscopic Images

Choi, Woosung; Huh, Hyunsuk; Tama, Bayu Adhi; Park, Gyusang; Lee, Seungchul, IEEE ACCESS, v.7, pp.92151 - 92160, 2019

405
A neural network model to determine the plate

LEE, D . Y.; Cho, Hyungsuck; CHO, D. Y., JOURNAL OF INTELLIGENT MANUFACTURING, v.11, no.6, pp.547 - 557, 2000-06

406
A Neural Network- Based Classification Method for Inspection of Bead Shape in High Frequency Electric Resistance Weld

K.W.Ko; H.S.Cho; J.H.Kim, TRANSACTION ON CONTROL, AUTOMATION AND SYSTEMS ENGINEERING, v.2, no.3, pp.182 - 188, 2000

407
A Neural Network-Based Computational Scheme for Generating Optimized Robotic Assembly Sequence

Cho, Hyungsuck, ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE, v.8, no.2, pp.129 - 145, 1995-01

408
A Neural Nnetwork-Based Computational Mmethod for Generating The optimalk Robotic Assembly Sequence

조형석, 대한기계학회논문집, v.18, no.7, pp.1881 - 1897, 1994-01

409
A Neuro Fuzzy Model-Based Compliance Controller with Application to a Tele-Robot System

Cho, Hyungsuck, CONTROL ENGINEERING PRACTICE, v.4, no.3, pp.319 - 330, 1996-01

410
A neuro-fuzzy approach to select welding conditions for welding quality improvement in horizontal fillet welding

Moon, HS; Na, Suck-Joo, JOURNAL OF MANUFACTURING SYSTEMS, v.15, no.6, pp.392 - 403, 1996

411
A new 3-DOF Z-tilts micropositioning system using electromagnetic actuators and air bearings

Lee S.-Q.; Gweon, Dae-Gab, PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, v.24, no.1, pp.24 - 31, 2000

412
A NEW 3D SENSOR SYSTEM BY USING VIRTUAL CAMERA MODEL AND STEREO VISION FOR MOBILE ROBOTS

Cho, Hyungsuck, JOURNAL OF AUTOMATION, MOBILE ROBOTICS & INTELLIGENT SYSTEMS, 2008-12

413
A new 4-node MITC element for analysis of two-dimensional solids and its formulation in a shell element

Ko, Yeong Bin; Lee, Phill-Seung; Bathe, Klaus-Jurgen, COMPUTERS & STRUCTURES, v.192, pp.34 - 49, 2017-11

414
A new analytical theory for earing generated from anisotropic plasticity

Yoon, Jeong Whan; Dick, R. E.; Barlat, F., INTERNATIONAL JOURNAL OF PLASTICITY, v.27, no.8, pp.1165 - 1184, 2011-08

415
A new approach for failure criterion for sheet metals

Stoughton, Thomas B.; Yoon, Jeong Whan, INTERNATIONAL JOURNAL OF PLASTICITY, v.27, no.3, pp.440 - 459, 2011-03

416
A new approach for fracture prediction considering general anisotropy of metal sheets

Park, Namsu; Stoughton, Thomas B.; Yoon, Jeong Whan, INTERNATIONAL JOURNAL OF PLASTICITY, v.124, pp.199 - 225, 2020-01

417
A new approach for nonmatching interface construction by the method of localized Lagrange multipliers

Jeong, Gil-Eon; Song, Yeo-Ul; Youn, Sung-Kie; Park, K. C., COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, v.361, 2020-04

418
A new approach for Solving the inverse Kinematics in Real-Time Application

Oh, Jun-Ho; Park, Seo-Wook, INTERNATIONAL JOURNAL OF ROBOTICS RESEARCHR, v.0, no.0, pp.0 - 0, 1990-01

419
A new approach to analysing machined surfaces by ball-end milling, part I: Formulation of characteristic lines of cut remainder

Jung, TS; Yang, Min-Yang; Lee, KJ, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.25, no.9-10, pp.833 - 840, 2005-05

420
A new approach to analysing machined surfaces by ball-end milling, part II: Roughness prediction and experimental verification

Jung, TS; Yang, Min-Yang; Lee, KJ, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.25, no.9-10, pp.841 - 849, 2005-05

rss_1.0 rss_2.0 atom_1.0