Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Article
Showing results 9241 to 9260 of 12232
| Tomographic PIV measurements of flow patterns in a nasal cavity with geometry acquisition Im, Sunghyuk; Heo, Go Eun; Jeon, Young Jin; Sung, Hyung Jin; Kim, Sung Kyun, EXPERIMENTS IN FLUIDS, v.55, no.1, 2014-01 |
| Toms 효과가 있는 저어널베어링에서의 k-ε 모델을 이용한 성능해석 이득우; 김경웅, 대한기계학회논문집 A, v.10, no.4, pp.487 - 493, 1986-07 |
| Tool design in a multi-stage drawing and ironing process of a rectangular cup with a large aspect ratio using finite element analysis Kim, SH; Kim, SH; Huh, Hoon, INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE, v.42, no.7, pp.863 - 875, 2002-05 |
| Tool life model for abrasive wet micro-drilling of ceramic green bodies Lee, HG; Lee, Dai Gil, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, v.44, no.7-8, pp.839 - 846, 2004-06 |
| Tool life prediction for the bolt forming process based on high-cycle fatigue and wear Lee, HC; Lee, Y; Lee, SY; Choi, S; Lee, DL; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.201, no.1-3, pp.348 - 353, 2008-05 |
| TOOL PATH DESIGN OF INCREMENTAL OPEN-DIE DISK FORGING USING PHYSICAL MODELING Lee, Sung-Uk; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, v.22, no.31-32, pp.5686 - 5691, 2008-12 |
| Tool wear monitoring system for CNC end milling using a hybrid approach to cutting force regulation Lee, KJ; Lee, TM; Yang, Min-Yang, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.32, no.1-2, pp.8 - 17, 2007-02 |
| Toolpath planning algorithm for the ablation process using energy sources Kim, HC; Lee, SH; Yang, Dong-Yol, COMPUTER-AIDED DESIGN, v.41, no.1, pp.59 - 64, 2009-01 |
| Top-down fabricated silicon nanowire sensors for real-time chemical detection Park, Inkyu; Li, Zhiyong; Pisano, Albert P.; Williams, R. Stanley, NANOTECHNOLOGY, v.21, no.1, 2010-01 |
| Top-Feed Type 인젝터의 액상 분사 LPG 연료 분사 장치 적용 염기태; 박정서; 배충식; 박정남; 김성근, 한국자동차공학회 논문집, v.15, no.6, pp.30 - 37, 2007-11 |
| Top-Feed Type 인젝터의 액상분사 LPG연료 분사장치 적용 염, 기태; 박, 정서; 배, 충식; 박, 정남; 김, 성근; Yeom, Kitae; Park, Jungseo; et al, Transactions of KSAE, Vol.15, No.6, pp.30-37, 2007-11 |
| Topographic SLAM Using a Single Terrain Altimeter in GNSS-Restricted Environment Jang, Junwoo; Kim, Jinwhan, IEEE ACCESS, v.10, pp.10806 - 10815, 2022-01 |
| Topography imaging with a heated atomic force microscope cantilever in tapping mode Park, Keunhan; Lee, Jungchul; Zhang, Zhuomin M.; King, William P., REVIEW OF SCIENTIFIC INSTRUMENTS, v.78, no.4, 2007-04 |
| Topological interface states in deep-subwavelength phononic beams Park, Seongmin; Jeon, Wonju, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, v.197, 2023-08 |
| Topology optimization based on spline-based meshfree method using topological derivatives Hur, Junyoung; Kang, Pilseong; Youn, Sung-Kie, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.31, no.5, pp.2423 - 2431, 2017-05 |
| Topology optimization for a frequency response and its application to a violin bridge Yu, Yonggyun; Jang, In Gwun; Kwak, Byung Man, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.48, no.3, pp.627 - 636, 2013-09 |
| Topology optimization for a knuckle using design space adjustment and refinement Jang, IG; Yu, YG; Kwak, Byung Man, 대한기계학회논문집 A, v.30, no.5, pp.595 - 601, 2006 |
| Topology Optimization of a HDD Actuator Arm 장수영; 조지현; 윤성기; 김철순; 오동호, COMPUTATIONAL STRUCTURAL ENGINEERING, v.1, no.2, pp.89 - 96, 2001 |
| Topology optimization of a heat sink with an axially uniform cross-section cooled by forced convection Lee, Gilho; Lee, Ikjin; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.168, pp.120732, 2021-04 |
| Topology optimization of deformable bodies with dissimilar interfaces Jeong, Gil-Eon; Youn, Sung-Kie; Park, K. C., COMPUTERS & STRUCTURES, v.198, pp.1 - +, 2018-03 |
Discover
Open Access
Date issued
- 4,058 2020 - 2024
- 12,348 2010 - 2019
- 10,785 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989