Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Thesis(Ph.D)

Showing results 629 to 688 of 1858

629
Kalman filter based visual tracking using probabilistic motion segmentation and the first-order differential invariants = 확률적 영상분할과 일차미분불변량을 이용한 칼만필터 기반의 영상추적link

Lee, Joon-Woong; 이준웅; et al, 한국과학기술원, 1997

630
KrF 엑사이머 레이저를 이용한 크롬박막 제거특성 및 패턴형성에 관한 연구 = A study on the KrF excimer laser ablation characteristics and micro-patterning of Cr film on glass substratelink

이성국; Lee, Seong-Kuk; et al, 한국과학기술원, 2000

631
Laminar natural convection heat transfer about a heated horizontal cylinder having an attached or separated plume = 附着 혹은 剝離된 熱上昇流를 갖는 加熱된 水平실린더 주위의 層流 自然對流link

Cho, Chul-Hyung; 조철형; et al, 한국과학기술원, 1985

632
Large deformation modeling for fiber reinforced composite and particle reinforced metal matrix composite = 섬유 강화 복합재 및 금속 기지 입자 강화 복합재의 대변형 모델링link

Park, Junyong; Yoon, Jeong Whan; et al, 한국과학기술원, 2023

633
Large-scale motions in turbulent pipe flow = 난류 파이프 유동 내 대형 구조에 관한 연구link

Ahn, Junsun; 안준선; et al, 한국과학기술원, 2017

634
Large-scale motions in wall-bounded turbulent flows = 벽난류의 대형 유동 구조에 관한 연구link

Lee, Jin; 이진; et al, 한국과학기술원, 2014

635
Laser-assisted selective infiltration of superheated μ-droplets for direct fabrication of metal parts = 레이저와 과열된 μ금속방울을 이용한 선택적 용침과 쾌속 부품제작에 관한 연구link

Sohn, Hyon-Kee; 손현기; et al, 한국과학기술원, 2003

636
Laterally-driven electrostatic attractive- and repulsive-force microactuators for frequency tuning and quality-factor control = 주파수 및 감쇠계수 조정이 가능한 정전인력 및 정전반발력 수평구동형 마이크로액츄에이터link

Lee, Ki-Bang; 이기방; et al, 한국과학기술원, 2000

637
Lattice boltzmann simulations on optical manipulation of microdroplets = 광력을 이용한 미소 액적의 제어에 관한 격자 볼츠만 해석link

Cho, Hyunjun; 조현준; et al, 한국과학기술원, 2016

638
Layered discrete event system specification을 적용한 조선 생산 일정 시스템 모델에 관한 연구 = (The) layered discrete event system specification approach to shipyard production scheduling system modellink

구본근; 한순흥; Han, Soonhung; 정현; et al, 한국과학기술원, 2019

639
Linear and geometric nonlinear spline finite element analysis for trimmed cad models and its extension to meshfree analyses = 트리밍 기법을 이용한 스플라인 유한요소기반 선형/기하비선형 해석 및 이의 무요소법으로의 확장에 관한 연구link

Kim, Hyun-Jung; 김현중; et al, 한국과학기술원, 2010

640
Linear and nonlinear ARMAX modeling approach in nonlinearity identification = 선형 및 비선형 ARMAX 모형화를 이용한 비선형성 규명link

Jang, Han-Kee; 장한기; et al, 한국과학기술원, 1994

641
Linear frequency conversion of light via time-varying metasurface = 시간에 따라 변화하는 메타표면을 이용한 빛의 선형 주파수 변환link

Son, Jaehyeon; Min, Bumki; et al, 한국과학기술원, 2019

642
Liquid metal-based soft pressure sensor for wearable health monitoring applications = 웨어러블 헬스 모니터링을 위한 액체 금속 기반 유연 압력 센서link

Kim, Kyuyoung; Park, Inkyu; et al, 한국과학기술원, 2020

643
Liquid-based optical waveguide and its application for particle manipulation = 액체 기반의 광도파관과 입자 분리로의 응용link

Lee, Kang-Soo; 이강수; et al, 한국과학기술원, 2013

644
Load balancing for parallel multilevel substructuring and coarse mesh projection for nonlinear model reduction = 병렬 다중 레벨 부구조법의 부하 분산 및 비선형 모델 축소를 위한 성긴 격자 투영link

Hyun, Cheolgyu; Lee, Phill-Seung; et al, 한국과학기술원, 2022

645
Local temperature measurement of nano/micro-structures using optical thermometry = 광학적 방법을 이용한 나노/마이크로 구조에서의 온도 측정에 관한 연구link

Rho, Jinsung; Lee, Bong Jae; et al, 한국과학기술원, 2019

646
Localized mesh refinement based on modified laplacian smoothing technique for finite element forging simulations = 단조 공정 해석을 위한 수정된 라플라시안 유연화 기법에 근거한 국소 격자 세밀화link

Kwak, Dae-Young; 곽대영; et al, 한국과학기술원, 2001

647
Localized synthesis and integration of functional nanomaterials for a multi-modal gas sensor array = 다중 모드 가스 센서 어레이를 위한 기능성 나노 물질의 국소 합성 및 집적link

Dionisio Valentin, Del Orbe Henriquez; Park, In Kyu; et al, 한국과학기술원, 2022

648
Locomotion control for hydraulic lower extremity exoskeleton for stable walking on level and non-level ground = 유압식 착용로봇을 위한 평지 및 비평지 환경에서의 보행 제어link

Kim, Hong-Chul; Kim, Jung; et al, 한국과학기술원, 2017

649
Long stroke planar motion maglev stage using new conductor structure = 새로운 도체 구조를 이용한 대행정 자기부상 평면구동 스테이지link

Woo, Si Woong; 우시웅; et al, 한국과학기술원, 2015

650
Long-distance MR-compatible actuation method using cable-driven transmission = 케이블 동력 전달을 이용한 원거리 자기공명 호환 구동 방법link

Kim, Seong-Tae; 김성태; et al, 한국과학기술원, 2016

651
Low-Reynolds-number k-ε models for separated and reattaching flows = 난류박리 및 재부착 유동해석을 위한 저레이놀즈수 k-ε 난류모델link

Park, Tae-Seon; 박태선; et al, 한국과학기술원, 1996

652
Magnetic field modeling and force ripple minimization in slotted moving coil type linear motor = 슬롯 있는 가동코일형 선형모터에서 자속밀도의 모델링과 추력리플 최소화를 위한 연구link

Chung, Myung-Jin; 정명진; et al, 한국과학기술원, 2002

653
Magneto-rheological fluid based squeeze film damper for semi-active unbalance response control of rotor = 회전체의 불균형 응답 제어를 위한 자기유변유체를 이용한 스퀴즈 필름 댐퍼link

Kim, Keun-Joo; 김근주; et al, 한국과학기술원, 2005

654
Maritime safety analysis framework considering human collaborative relation network = 인적 협업 네트워크 특성을 고려한 해양 시스템의 안전 분석 프레임워크 연구link

Lee, Joohee; Chang, Daejun; 장대준; Chung, Hyun; et al, 한국과학기술원, 2018

655
Material parameter determination using terahertz time-domain signal analysis = 테라헤르츠 시간 영역 신호 분석에 의한 물성 측정 연구link

Choi, Jindoo; 최진두; et al, 한국과학기술원, 2016

656
Measurement and compensation of ankle stiffness using sensor-integrated pneumatic ankle foot orthosis = 센서 통합형 공압 단하지 보조기를 이용한 발목 강성 측정 및 보상link

Gu, Gwang Min; 구광민; et al, 한국과학기술원, 2015

657
Mechanical perspectives on fibroblasts in wound healing and tumorigenesis = 상처치유과정과 종양형성에서 섬유아세포의 세포역학적 특성link

Kang, Minwoo; Shin, Jennifer H.; et al, 한국과학기술원, 2023

658
Mechanical properties and interfacial reliability of organic electronic materials = 유기전자재료의 기계적 특성 및 계면 신뢰성link

Lee, Inhwa; 이인화; et al, 한국과학기술원, 2017

659
Mechanical properties and reliability of advanced energy/electronic materials = 차세대 에너지/전자 재료의 기계적 물성 및 신뢰성 평가link

Kim, Jae-Han; 김재한; et al, 한국과학기술원, 2017

660
Mechanical properties, stretchability and fatigue behavior of metal thin films = 금속 박막의 기계적 물성, 신축성 및 피로 거동link

Sim, Gi-Dong; 심기동; et al, 한국과학기술원, 2012

661
Mechanical regulation of collective behavior and interfacial dynamics of cell clusters = 계면 형성과 세포 군집 거동 간 기계적 상호작용의 규명link

Jeong, Hyuntae; Shin, Jennifer Hyunjong; et al, 한국과학기술원, 2023

662
Mechanical sensing of skeletal muscle contraction and fatigue for physical human-robot interaction = 물리적 인간 로봇 상호 작용을 위한 골격근 수축과 피로의 기계적 측정link

Han, Hyo-Nyoung; 한효녕; et al, 한국과학기술원, 2012

663
Mechanical stresses in cellular collective migration = 세포 군집 운동 속 물리적 힘의 역할 규명link

Cho, Youngbin; Shin, Jennifer H.; et al, 한국과학기술원, 2020

664
Mechanically/thermally induced shape-morphing for atypical micro/nanostructures = 비정형 마이크로/나노구조체 구현을 위한 기계적/열적 형상 변형 방법link

Ahn, Junseong; Park, Inkyu; et al, 한국과학기술원, 2023

665
MEMS-based portable direct methanol fuel cells with platinum sputtered microcolumn electrodes using limited fuel sources = 백금 촉매가 증착된 미소돌기 전극을 이용한 유한연료형 휴대용 마이크로 직접메탄올연료전지에 관한 연구link

Seo, Young-Ho; 서영호; et al, 한국과학기술원, 2003

666
Mesh generation and adaptive refinement of all-hexahedral elements for three-dimensional finite element analysis = 3차원 유한요소 해석을 위한 육면체 요소의 격자 생성 및 세분화에 관한 연구link

Park, Chul-Hyun; 박철현; et al, 한국과학기술원, 2005

667
Method of generating 3 dimensional sounds for elevation perception = 고도감 인지를 위한 3차원 입체 음향 기술 재생법link

Jo, Hyun; 조현; Park, Youn-Sik; 박윤식; et al, 한국과학기술원, 2012

668
Methods for detection and resolution of self-intersection in simulation of lattice-based deformation = 격자를 이용한 변형 시뮬레이션에서 자체교차를 검사 및 방지하기 위한 방법link

Ahn, Woo-Jin; 안우진; et al, 한국과학기술원, 2010

669
Micro-biosensor integrated medical needle towards teal-time tissue analysis during medical procedure = 수술 및 시술 중 실시간 조직 분석을 위한 마이크로 바이오센서가 집적된 의료용 바늘의 개발link

Park, Jaeho; Park, Inkyu; et al, 한국과학기술원, 2019

670
Micromechanics-based homogenization of the effective physical properties of reinforced composites = 미시역학 기반 균질화법을 이용한 복합재의 유효 물성치 예측연구link

Lee, Sangryun; Ryu, Seunghwa; et al, 한국과학기술원, 2020

671
Microstructured dielectric elastomer-based flexible tactile display resistant to large contact force = 가압 접촉에 강인한 미세구조 유전성 탄성체 기반의 유연촉감디스플레이link

Pyo, Dongbum; Kwon, Dong-Soo; et al, 한국과학기술원, 2018

672
Microwave-assisted plasma ignition을 이용한 가솔린 엔진의 성능 및 배기특성 향상 = Performance and emission improvement by micorwave-assisted plasma ignition in a direct-injection gasoline enginelink

황준식; Hwang, Joonsik; et al, 한국과학기술원, 2017

673
Miniaturized confocal imaging system for large-volume high-speed 3-D measurement = 대용적 3차원 형상의 고속 측정이 가능한 소형 공초점 이미징 시스템link

Jeong, Hyeong Jun; Gweon, Dae-Gab; et al, 한국과학기술원, 2016

674
MISO 모형을 이용한 소음 / 진동원 규명법과 우선순위 결정에 관한 연구 = Source identification using MISO model and determination of the priority among correlated inputslink

박정석; Park, Jung-Seok; et al, 한국과학기술원, 1992

675
MLS(Moving Least Square)-based finite elements and their applications = 이동최소제곱법기반 유한요소 및 그의 응용link

Lim, Jae-Hyuk; 임재혁; et al, 한국과학기술원, 2006

676
Modal analysis of asymmetric rotor with anisotropic stator using modulated coordinates = 변조좌표계를 활용한 비대칭/비등방 회전체의 모드해석기법link

Suh, Jeong-Hwan; 서정환; et al, 한국과학기술원, 2004

677
Modal analysis of periodically time-varying rotor systems using floquet theory and modulated coordinate transformation : applications to crack detection and modal balancing = 플로케 이론 및 변조 좌표계를 이용한 주기적 시변 회전체의 모드 해석과 균열 탐지 및 모드 밸런싱에의 적용link

Han, Dong-Ju; 한동주; et al, 한국과학기술원, 2006

678
Model analysis of multi-input/multi-output systemby vector ARMAX time series modeling = 벡터 ARMAX 시계열 모델링에 의한 다입력/다출력계의 모우드해석link

Park, Byeong-Ho; 박병호; et al, 한국과학기술원, 1989

679
Model based feed-forward control of electromagnetic type active control engine mount system = 전자석 구동형 능동 엔진 마운트의 모델 기반 제어link

Lee, Bo-Ha; 이보하; et al, 한국과학기술원, 2008

680
Model predictive control of an all-wheel drive system considering vehicle dynamics change by clutch engagement state = 클러치 체결 상태에 따른 차량 동역학 변화를 고려한 사륜구동 시스템의 모델 예측 기반 제어link

Jung, Hojin; Choi, Seibum; et al, 한국과학기술원, 2019

681
Modeling and control of nonlinear systems with multilayer neural network and its Jacobian = 다층 신경회로망의 자코비안을 이용한 비선형 시스템의 모델링과 제어에 관한 연구link

Lee, Jeong-Woo; 이정우; et al, 한국과학기술원, 1997

682
Modeling and simulation of deformable objects using iterative updates of local positions = 국부 위치 해의 반복 갱신을 이용한 변형체 모델링과 시뮬레이션link

Han, Hyehyun; Lee, Doo Yong; et al, 한국과학기술원, 2020

683
Modeling and vibration analysis of misaligned rotor-ball bearing systems = 축어긋남이 있는 회전체-볼베어링계의 모형화와 진동해석link

Lee, Young-Seob; 이영섭; et al, 한국과학기술원, 1998

684
Modeling approach to packed bed process with solid particle reactions = 고체 입자 반응을 포함한 고정층 모델링 : 철광석 펠릿 소성 공정link

Ahn, Hyungjun; 안형준; et al, 한국과학기술원, 2017

685
Modeling of dual-chamber pneumatic spring and application to transmissibility design of vibration isolation table = 이중챔버형 공압스프링의 모형화 및 제진대 전달률 설계에의 응용link

Lee, Jeung-Hoon; 이정훈; et al, 한국과학기술원, 2007

686
Modeling of helically stranded cables using multiple beam finite elements and its application to cable design = 다중 보 유한요소를 이용한 케이블의 모델링 방법 및 이를 이용한 케이블 설계link

Kim, Sung Yun; 김성윤; et al, 한국과학기술원, 2017

687
Modeling, customization, and interpolation of head-related impulse responses based on principal components analysis = 주성분 분석법을 이용한 머리전달함수의 모형화, 맞춤 및 보간법link

Hwang, Sung-Mok; 황성목; et al, 한국과학기술원, 2009

688
Modelling and experimental investigation of icevaning control for arctic offshore vessels = 극지 해양구조물의 동적위치유지 제어를 위한 모델링 및 실험적 연구link

Kim, Young-Shik; Kim, Jinwhan; et al, 한국과학기술원, 2018

rss_1.0 rss_2.0 atom_1.0