Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Thesis(Ph.D)

Showing results 26 to 85 of 1858

26
A hybrid solar cell using polymers and silicon nanoparticles = 실리콘 나노 입자를 이용한 유/무기 하이브리드 태양전지 개발link

Kim, Seong-Beom; 김성범; et al, 한국과학기술원, 2012

27
A mechatronic study on a self-energizing clutch actuator system: modeling, estimation, and control = 자기강화클러치 구동 시스템에 관한 메카트로닉스적 연구: 모델링, 추정 및 제어기 설계link

Kim, Jin-Sung; 김진성; et al, 한국과학기술원, 2013

28
A new ductile fracture criterion for the formability prediction of steel sheets and its application to finite element analysis = 강판의 성형성 예측을 위한 새로운 연성 파괴 조건 및 유한 요소 해석에의 응용link

Lou, Yan-Shan; Lou Yanshan; et al, 한국과학기술원, 2012

29
A numerical investigation on high power laser welding characteristics of pipes = 고출력 레이저를 이용한 파이프 용접특성의 수치해석적 연구link

Sohail, Muhammad; Sohail; et al, 한국과학기술원, 2015

30
A quasiconuum method for deformations of carbon nanotubes = 탄소나노튜브의 변형 해석을 위한 준연속체 방법link

Park, Jong-Youn; 박종연; et al, 한국과학기술원, 2007

31
A robust model-based control design for turbocharged diesel engine air management system = 디젤 엔진 공기 순환계를 위한 강건한 모델 기반 제어기의 설계link

Jin, Hyo-Min; 진효민; et al, 한국과학기술원, 2014

32
A study of caenorhabditis elegans motility in various physical environments = 다양한 물리적 환경에서 예쁜 꼬마선충의 운동성에 관한 연구link

Kim, Dae-Yeon; 김대연; et al, 한국과학기술원, 2011

33
A study of clutchless parallel hybrid powertrain mechanism = 클러치가 없는 병렬형 하이브리드 파워트레인 메커니즘에 대한 연구link

Kim, Sun Je; 김선제; et al, 한국과학기술원, 2015

34
A study of oocyte/embryo manipulation using microfluidics and robotics = 미세유체역학 및 로봇기술을 이용한 난자 미세조작에 관한 연구link

Kim, Jung-Sik; 김정식; et al, 한국과학기술원, 2012

35
A study on a system architecture of model predictive control for vehicle lateral stability = 차량의 횡방향 안정성 향상을 위한 모델예측제어의 시스템 구조에 관한 연구link

Choi, Moo-Ryong; 최무룡; et al, 한국과학기술원, 2014

36
A study on continuous carbon/epoxy composite bipolar plates for PEM fuel cells = 양성자 교환막 연료전지용 장섬유 탄소/에폭시 복합재료 분리판에 관한 연구link

Lim, Jun-Woo; 임준우; et al, 한국과학기술원, 2013

37
A Study on J-integral estimation and its applications for circumferential through-wall cracks in piping = 배관 원주방향 관통균열에 대한 J-적분 평가 및 적용에 대한 연구link

Park, Jeong Soon; 박정순; Im, Se Young; 임세영; et al, 한국과학기술원, 2015

38
A study on large-deformation contact behaviors using variable-node finite elements = 변절점 요소를 이용한 대변형 접촉 거동에 관한 연구link

Jin, seungmin; 진승민; et al, 한국과학기술원, 2015

39
A Study on Multiple-Reflection and Rayleigh Absorption-Emission-Scattering Effects in Laser Micromachining = 레이저 마이크로 가공에 있어서 다중반사 및 레일레이 흡수방사산란 효과에 관한 연구link

Park, Kwan-Woo; 박관우; et al, 한국과학기술원, 2010

40
A study on quantitative observation and characterization of combustion processes of solid fuel particles entrained into hot gas flow = 고온 유동장 내 고체연료 입자 연소과정의 정량적 관측과 특성화 연구link

Lee, Hoo Kyung; 이후경; et al, 한국과학기술원, 2015

41
A study on the adhesive joints for the secondary barrier of LNG cargo containment system = 액화천연가스 저장시스템의 2차 방벽 접착 조인트에 관한 연구link

Yoon, Soon-Ho; 윤순호; et al, 한국과학기술원, 2012

42
A study on the analysis of shell structures using adaptive t-spline finite element method = 적응적 T-스플라인 유한요소법을 이용한 쉘 구조물의 해석에 관한 연구link

Uhm, Tae-Kyoung; 엄태경; et al, 한국과학기술원, 2010

43
A study on the characteristics of nano-particle reinforced adhesive joints at cryogenic temperature = 나노입자 보강 접착조인트의 극저온 특성에 대한 연구link

Park, Sang-Wook; 박상욱; et al, 한국과학기술원, 2010

44
A study on the composite structures for the reduction of radar cross section = 레이더 반사 단면적 감소를 위한 복합재료 구조체에 관한 연구link

Choi, Ilbeom; 최일범; et al, 한국과학기술원, 2015

45
A study on the design of quadruped walking robot and its push recovery strategy = 사족보행로봇 설계와 외란복원기법에 대한 연구link

Chung, Jae-Wook; 정재욱; et al, 한국과학기술원, 2010

46
A study on the improvement of adhesively bonded joint strength at cryogenic temperature with flame and silane treatment = 접착조인트의 극저온 강도 향상을 위한 화염 및 실란 표면처리에 관한 연구link

Kim, Jin-Gyu; 김진규; et al, 한국과학기술원, 2012

47
A study on the isogeometric shape and topology optimization of shell structures = 등기하해석을 이용한 쉘 구조물의 형상 및 위상 최적설계에 관한 연구link

Kang, Pilseong; 강필성; et al, 한국과학기술원, 2015

48
A study on the sheet metal forming process using the infrared ray local heating for advanced high-strength steel = 적외선 국부가열을 사용한 초고장력강 판재 성형공정에 관한 연구link

Lee, Eun-Ho; 이은호; et al, 한국과학기술원, 2015

49
A study on viscoelastic contact behaviors of polymer for transfer printing applications = 트랜스퍼 프린팅용 폴리머 재료의 점탄성 접촉 거동에 관한 연구link

Park, Jae-Shin; 박재신; et al, 한국과학기술원, 2014

50
A task-priority strategy for highly redundant robots: efficient redundancy optimization and robust dynamic consistent control = 많은 수의 여유자유도를 가지는 로봇을 위한 작업 우선 순위 전략: 효율적인 여유자유도 최적화와 강인한 다이나믹 컨시스턴트 (Dynamic Consistent) 제어link

Jeong, Jae-Won; 정재원; et al, 한국과학기술원, 2011

51
(A) biprism stereo camera system = 바이프리즘 스테레오 카메라 시스템link

Lee, Doo-Hyun; 이두현; et al, 한국과학기술원, 2000

52
(A) chromatic color constancy model for three dimensional objects based on human visual and illuminant perception = 인간의 시각과 광원 인지 특성을 이용한 3차원 물체의 색도 항상성 모델link

Kim, Chang-Yeong; 김창용; et al, 한국과학기술원, 1998

53
(A) continuously variable transmission for physically interacting robot = 물리적으로 상호작용하는 로봇을 위한 연속 가변 변속기link

Shin, Won-Seok; Kim, Jung; et al, 한국과학기술원, 2023

54
(A) crowd evacuation simulation considering interaction between human reaction and fire simulation data = 인간의 대응과 화재 시뮬레이션 데이터의 상호작용을 고려한 군중 탈출 시뮬레이션link

Kim, HyunCheol; Han, Soonhung; et al, 한국과학기술원, 2019

55
(A) data-driven approach to modeling and control of mobile robots with nonlinear dynamics = 비선형성을 갖는 이동 로봇의 모델링 및 제어를 위한 데이터 기반 방법론link

Jang, Junwoo; Kim, Jinwhan; et al, 한국과학기술원, 2023

56
(A) dislocation theory of semi-brittle fracture = 반취성 파괴 이론link

Chung, Soon-Kil; 정순길; et al, 한국과학기술원, 1981

57
(A) ductile fracture criterion of sheet metals at a wide range of strain rates = 변형률속도에 따른 금속 판재의 연성파단조건link

Lim, Sung Jun; 임성준; et al, 한국과학기술원, 2017

58
(A) fine positioning mechanism based on antagonistic arrangement of magnetic levitation forces = 자기부상력의 상반구조 배열을 이용한 미세 위치결정기구link

Choi, Kee-Bong; 최기봉; et al, 한국과학기술원, 1998

59
(A) haptic master interface for robot-assisted laparoscopic surgery = 복강경 로봇 수술을 위한 햅틱 마스터 인터페이스link

Lee, Hyunyoung; Kwon, Dong-Soo; et al, 한국과학기술원, 2019

60
(A) hydraulic haptic interface for catheter simulation = 카테터 시뮬레이션을 위한 유압 구동식 햅틱 인터페이스link

Li, Chengjie, 한국과학기술원, 2022

61
(A) macro/micro robotic probing system with active compliance = 능동적인 순응성을 갖는 프로브 시스템에 관한 연구link

Shim, Jae-Hong; 심재홍; et al, 한국과학기술원, 1998

62
(A) new approach for solving the inverse kinematics of robot manipulators using incremental unit computation method = 증분단위계산법을 이용한 로봇 매니퓨레이터의 역기구학에 대한 새로운 해법link

Park, Seo-Wook; 박서욱; et al, 한국과학기술원, 1993

63
(A) new omni-directional image sensing system for assembly of parts with arbitrary cross-sectional shapes(OISSA) = 임의의 단면형상을 갖는 부품의 조립을 위한 새로운 전방향 시각장치에 관한 연구link

Kim, Wan-Soo; 김완수; et al, 한국과학기술원, 1998

64
(A) novel bio-machine interface for the behavior modulation of living organism = 생물 행동 조절을 위한 새로운 바이오-기계 인터페이스 개발link

Kim, Dae-gun; Lee, Phill-Seung; et al, 한국과학기술원, 2017

65
(A) Novel miniature kinaestactile actuator based on magnetorheological fluids = 자기유변유체를 이용한 새로운 초소형 근.촉감각 액츄에이터link

Yang, Tae-Heon; 양태헌; et al, 한국과학기술원, 2012

66
(A) numerical study on flow and heat transfer and development of tip-leakage loss and broadband noise model for axial flow turbomachinery tip gaps = 축류터보기계의 끝간격 내에서의 유동과 열전달 수치 연구 및 끝간격 손실과 광역소음 모형 개발link

Kim, Byung-Nam; 김병남; et al, 한국과학기술원, 1996

67
(A) performance index for bilateral teleoperation : telepresence index = 양방향 원격조종을 위한 성능 지수 : 텔레프레즌스 지수link

Jong-hyun Kim; 김종현; et al, 한국과학기술원, 2010

68
(A) plate model for multilayer graphene sheets and their wrinkle structures analysis = 다층 그래핀 판 모델 및 주름구조 해석link

Kim, moonhong; Im, Seyoung; et al, 한국과학기술원, 2018

69
(A) practical method for evaluating stability of local structures using strain energy variation = 변형에너지 변분을 이용한 국부 구조의 실용적인 안정성 평가 방법link

Oh, Min-Han; Lee, Phill-Seung; et al, 한국과학기술원, 2020

70
(A) research on interfacial adhesion energy and transfer process of synthesized graphene = 합성 그래핀의 계면 접합력 및 전사 공정에 대한 연구link

Seo, Jeongmin; 서정민; et al, 한국과학기술원, 2017

71
(A) rigid-plastic finite element alalysis of sheet metal forming considering contact and friction = 접촉과 마찰을 고려한 박판성형의 강소성 유한요소해석link

Chung, Wan-Jin; 정완진; et al, 한국과학기술원, 1989

72
(A) rigid-plastic finite element formulation considering the effect of geometric change and material anisotropy with application to sheet metal working = 형상변화 효과와 재료의 이방성을 고려한 강소성 유한요소법의 수식화 및 박판금속 성형에의 응용link

Kim, Yong-Jin; 김용진; et al, 한국과학기술원, 1986

73
(A) rigid-plastic finite element formulation of continuum elements and its application to sheet metal workin = 연속체요소의 강소성 유한요소 수식화 및 박판금속 성형에의 적용link

Lee, Dong-Woo; 이동우; et al, 한국과학기술원, 1997

74
(A) robust direct seek control for high-speed rotational optical disk drive systems = 고배속 광 디스크 드라이브 시스템을 위한 강인한 직접 탐색 제어link

Jin, Kyoung-Bog; 진경복; et al, 한국과학기술원, 1999

75
(A) Shared Ground Model of Human-Robot Interaction and Its Application for Measuring Interactivity = 인간-로봇 상호작용의 공유 기반 모델 및 이의 상호작용성 측정에의 응용link

Hwang, Jung-Hoon; 황정훈; et al, 한국과학기술원, 2007

76
(A) study for the control of passenger car suspension for ride comfort = 승차감 향상을 위한 승용차 현가장치의 제어에 관한 연구link

Kim, Hyuk; 김혁; et al, 한국과학기술원, 1995

77
(A) study of stochastic estimation method for driver acceptance evaluation of autonomous driving systems = 자율주행시스템의 운전자 수용성 평가를 위한 확률적 추정방법 연구link

Moon, Chulwoo; Choi, Seibum; et al, 한국과학기술원, 2018

78
(A) study of the motion control for flexible systems to achieve fast movement with less vibration = 고속주행과 진동저감을 위한 유연시스템에서의 모션제어기술에 관한 연구link

Ha, Chang-Wan; 하창완; et al, 한국과학기술원, 2014

79
(A) study on a class of three dimensional crack problems = 3차원 균열문제에 대한 연구link

Kim, Young-Jong; 김영종; et al, 한국과학기술원, 2000

80
(A) study on a non-contact sensing system using laser and vision sensors for measuring relative 6-DOF motion = 상대 6자유도 운동 측정을 위한 레이저 및 비전 센서를 이용한 비접촉식 센서 시스템 연구link

Kim, Young-Keun; 김영근; et al, 한국과학기술원, 2014

81
(A) study on adaptive control methods for flight vehicle = 비행체의 적응제어방법에 관한 연구link

Kim, Young-Seog; 김영석; et al, 한국과학기술원, 1988

82
(A) study on AI-based active assembly algorithm = 인공지능 이론을 이용한 능동적 조립 알고리즘에 관한연구link

Park, Yong-Kil; 박용길; et al, 한국과학기술원, 1992

83
(A) study on alignment automation of multi-lens using neural network and interferometer : application to focusing unit in near field recording system = 신경회로망과 간섭계를 이용한 다군 렌즈 정렬 자동화에 관한 연구 : 근접장 정보저장 기기에의 응용link

Yoon, Hyoung-Kil; 윤형길; et al, 한국과학기술원, 2005

84
(A) study on analysis and design of a poppet type electropneumatic servovalve = 포핏형 전자식 공기압 서보밸브의 해석 및 설계에 관한 연구link

Choi, Seo-Ho; 최서호; Cho, Hyung-Suck; Lee, Chung-Oh; et al, 한국과학기술원, 2000

85
(A) study on analysis of flow field and prediction of fiber orientation during flow molding of short fiber reinforced composites = 단섬유 강화 복합재료의 유동성형시 유동장 해석 및 단섬유배향 예측에 관한 연구link

Ko, Jin; 고진; et al, 한국과학기술원, 1994

rss_1.0 rss_2.0 atom_1.0