Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Thesis(Master)

Showing results 3373 to 3392 of 3882

3373
차동 피니지온지지 베어링 시스템 해석 = Differential pinion support bearing system analysislink

이경원; Lee, Kyeong-Won; 곽병만; 송지호; et al, 한국과학기술원, 1988

3374
차량 과도 역학 모델링 및 감쇠 자유진동을 이용한 무게중심 높이 추정 = Modeling of vehicle transient dynamics and CG height estimation using free decay responselink

고건희; 최세범; et al, 한국과학기술원, 2021

3375
차량 구동력 제어 시스템의 제어 기법에 대한 연구 = A study on the controller design of traction control systemlink

정훈상; Jung, Hun-Sang; et al, 한국과학기술원, 2000

3376
차량 구조용 접착제를 이용한 접합부의 복합하중조건에서 동적 파단 특성 연구 = Study on the dynamic failure model for structural adhesive joints under combined loading conditionslink

임승찬; Lim, Seung-Chan; et al, 한국과학기술원, 2012

3377
차량 동역학 제어를 위한 강건한 상태 예측기법에 관한 연구 = A study of robust state estimation methods for vehicle dynamics controlslink

손현우; Son, Hyun-Woo; et al, 한국과학기술원, 2009

3378
차량 듀얼 링크 현가장치의 진동 전달 특성 연구 = Dynamic analysis of dual link vehicle suspension systemlink

전동기; Chun, Dong-Ki; et al, 한국과학기술원, 1996

3379
차량 마운트의 고무 물성 역 추정과 형상 최적설계에 관한 연구 = (A) study on the rubber property inverse estimation and the shape optimization of the vehicle mountlink

이병준; 윤성기; et al, 한국과학기술원, 2018

3380
차량 조향을 위한 운전자 모델 연구 = A study on driver model for vehicle steeringlink

조영건; Cho, Young-Gun; et al, 한국과학기술원, 1995

3381
차량 탑재형 전자 광학 자동 추적 장치의 안정화 = Stabilization of an electro-optical tracker mounted on a moving vehiclelink

윤주홍; Yoon, Joo-Hong; et al, 한국과학기술원, 1986

3382
차량 편대제어를 위한 휠 토크 분배 전략 = Wheel torque distribution strategy for vehicle formation controllink

한승호; 김경수; et al, 한국과학기술원, 2021

3383
차량 후방 추돌 시 오버라이드/언더라이드 방지를 위한 자세 제어 = Vehicle attitude control to prevent override/underride in rear-end collisionslink

김동호; Kim, Dong-Ho; et al, 한국과학기술원, 2010

3384
차량용 반능동 댐퍼의 모형화에 관한 연구 = A study on the modeling of a semi-active damper for vehicleslink

김동신; Kim, Dong-Shin; et al, 한국과학기술원, 1989

3385
차량용 에어컨 압축기 제어 시스템의 모델링에 대한 연구 = Control system modeling of automotive A/C compressorlink

김새봄; 최세범; et al, 한국과학기술원, 2017

3386
차량의 가속주행 소음 예측 및 소음원 기여도 파악에 관한 연구 = A study on the identification of noise sources and the prediction of pass-by noise of accelerating vehicleslink

류정수; Ryu, Jeong-Suh; et al, 한국과학기술원, 1997

3387
차량의자 트랙시스템의 구조해석과 최적설계 수식화에 관한 연구 = Structrual analysis and optimal design formulation of a vehicle seat track systemlink

손일헌; Son, Il-Heon; et al, 한국과학기술원, 2000

3388
차세대 원자력 발전소의 신뢰성을 위한 Mod.9Cr-1Mo 강 (Grade 91)의 고온 피로균열진전 연구 = A study on the fatigue crack growth of Mod.9Cr-1Mo steel at the elevated temperature for next generation nuclear power plant reliabilitylink

이정환; Lee, Jeong-Hwan; et al, 한국과학기술원, 2013

3389
차원해석을 이용한 이중 챔버형 공압제진대의 능동제어를 위한 센서와 구동기의 선정에 관한 연구 = Selection of sensor and actuator for active control of dual-chamber pneumatic vibration isolator by dimensional analysislink

민지호; Min, Ji-Ho; et al, 한국과학기술원, 2008

3390
차체용 강판의 온도에 따른 동적 인장시험 및 물성 구성방정식에 관한 연구 = The dynamic tensile tests of auto-body steel sheets with the variation of temperature for material constitutive equationslink

이희종; Lee, Hee-Jong; et al, 한국과학기술원, 2006

3391
차체하부 샤시 마운팅부의 주행중 동하중 측정을 위한 매립형 다축 측정시스템에 대한 연구 = (A) study on the embedded multiaxial dynamic force measuring system for chassis mounting section of vehicle lower bodylink

엄상우; 김수현; et al, 한국과학기술원, 2017

3392
착석 자세 인체의 비선형 동적 모형화 = Nonlinear dynamic modeling of seated posture human bodylink

김기선; Kim, Ki-Sun; et al, 한국과학기술원, 2004

rss_1.0 rss_2.0 atom_1.0