Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Thesis(Master)

Showing results 2579 to 2598 of 3882

2579
아아크 열분사 과정에 있어서 열흐름에 관한 연구 = A study on the heat flow in arc spraying processlink

배강열; Bae, Kang-Yul; et al, 한국과학기술원, 1986

2580
아아크 열분사 피복층의 열유동 및 레이저 처리에 관한 연구 = A study on the heat flow and laser treatment of arc sprayed coatingslink

김원배; Kim, Weon-Bae; et al, 한국과학기술원, 1988

2581
아치형 구조 내 주기적 재료 배열을 통한 음향 밴드갭 진동 마운트 설계 = Design of vibration isolator using acoustic bandgap through periodic material arrangement in arched structurelink

문혜미; 김성수; et al, 한국과학기술원, 2021

2582
아크 센서의 신호 특성 및 용접선 추적을 위한 응용 = Signal characteristics of arc sensor and application to seam trackinglink

선우희권; Sunwoo, Hee-Kwon; et al, 한국과학기술원, 1996

2583
아크 안정성 평가를 위한 용접 전류 및 전압 파형 분석 알고리즘 개발에 관한 연구 = Development of an analysis algorithm of welding current and voltage for arc stability evaluationlink

강성구; Kang, Sung-Koo; et al, 한국과학기술원, 1997

2584
아크 용접공정에서 용접선의 실시간 추적을 위한 시각 시스템 = A vision system for real-time weld seam tracking in arc welding processeslink

김호학; Kim, Ho-Hack; et al, 한국과학기술원, 1989

2585
안정적인 파지를 위한 로봇 핸드 개발 = Development of robot hand for stable graspinglink

이호주; Lee, Ho-Ju; et al, 한국과학기술원, 2012

2586
안정화 절점적분이 적용된 이동최소제곱 기반 유한요소 = MLS(Moving Least Square)-based finite elements using a stabilized conforming nodal integrationlink

이준호; Lee, Jun-Ho; et al, 한국과학기술원, 2007

2587
앉은 자세 인체의 수직 방향 가진에 대한 동적 응답 특성화 및 시트용 폼의 전달률 예측에의 응용 = Dynamic characterization of human body in seated posture in vertical direction and its application to prediction of transmissibility of seat foamslink

송수연; Song, Su-Yon; et al, 한국과학기술원, 2001

2588
알루미나 성형체의 미소구멍가공에 관한 연구 = Micro-drilling of alumina green bodylink

이학구; Lee, Hak-Gu; et al, 한국과학기술원, 2002

2589
알루미나 세라믹과 구리의 브레이징 접합물에 대한 열응력의 유한요소법 해석에 관한 연구 = A study on the thermal stress analysis of alumina ceramics to copper brazement by finite element methodlink

전창훈; Jhon, Chang-Hoon; et al, 한국과학기술원, 1989

2590
알루미나계 쎄라믹 사출성형에 대한 기초연구 = A basic study of alumina ceramic injection moldinglink

나병철; Na, Byung-Chul; 오박균; 윤재륜; et al, 한국과학기술원, 1989

2591
알루미늄 7039 합금의 Lowcycle 피로 = Low cycle fatigue of Al 7039link

강기주; Kang, Kee-Joo; et al, 한국과학기술원, 1983

2592
알루미늄 딥 브레이징 접합부의 형상 예측과 접합 품질에 관한 연구 = Fillet geometry prediction and quality of aluminum dip brazed jointlink

윤석환; Yoon, Suk-Hwan; 유중돈; 나석주; et al, 한국과학기술원, 1998

2593
알루미늄 마이크로시편의 변형률속도에 따른 인장 특성 연구 = Study on the Strain-Rate Dependent Tensile Properties of Micro-Scale Aluminum Specimenslink

권준범; Kwon, Jun-Beom; et al, 한국과학기술원, 2012

2594
알루미늄 합금의 저항 점 용접시 온도 분포에 대한 연구 = A study on the temperature distributions in resistance spot welding of an aluminum alloylink

오세진; Oh, Sei-Jin; et al, 한국과학기술원, 1986

2595
알루미늄/CFRP 하이브리드 사각 중공빔의 충격하중에서의 에너지 흡수 특성 = Energy absorption characteristics of aluminum/CFRP square hollow section beam under the transverse impact loadinglink

김상영; Kim, Sang Young; et al, 한국과학기술원, 2016

2596
알루미늄/CFRP 하이브리드 사각 튜브의 탄소섬유 구조에 따른 충격 압궤 응답 및 에너지 흡수 특성 = Axial impact response and energy absorption characteristics of aluminum/CFRP hybrid square tube with different carbon fiber architecturelink

김준엽; 이정주; et al, 한국과학기술원, 2017

2597
알루미늄/GFRP 혼성 사각튜브의 정적 압축 붕괴 및 에너지 흡수 특성 = Axial crush and energy absorption characteristics of aluminum/GFRP hybrid square tubelink

김구현; Kim, Koo-Hyun; et al, 한국과학기술원, 2000

2598
알루미늄/GFRP 혼성튜브의 굽힘 붇괴 특성 = The bending collapse characteristics of aluminum/GFRP hybrid tubelink

송민철; Song, Min-Cheol; et al, 한국과학기술원, 2001

rss_1.0 rss_2.0 atom_1.0