Browse "Dept. of Mechanical Engineering(기계공학과)" by Subject DEFORMATION
Showing results 87 to 124 of 124
Pad Scratching in Chemical-Mechanical Polishing: The Effects of Mechanical and Tribological Properties Kim, Sanha; Saka, Nannaji; Chun, Jung-Hoon, ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY, v.3, no.5, pp.P169 - P178, 2014-04 |
| Performance improvement by glass fiber of adhesively bonded metal joints at the cryogenic temperature Bang, Chang-Seon; Kim, Jin-Gyu; Lee, Dai-Gil, COMPOSITE STRUCTURES, v.96, pp.321 - 331, 2013-02 |
| PIV measurement of flow around an arbitrarily moving body Jeon, Young-Jin; Sung, Hyung-Jin, EXPERIMENTS IN FLUIDS, v.50, no.4, pp.787 - 798, 2011-04 |
| PIV measurements of flow around an arbitrarily moving free surface Park, Jinsoo; Im, Sunghyuk; Sung, Hyung-Jin; Park, Jun Sang, EXPERIMENTS IN FLUIDS, v.56, no.3, 2015-03 |
| Plastic anisotropy and failure in thin metal: Material characterization and fracture prediction with an advanced constitutive model and polar EPS (effective plastic strain) fracture diagram for AA 3014-H19 Dick, Robert E.; Yoon, Jeong Whan, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, v.151, pp.195 - 213, 2018-10 |
| Post-buckling analysis with frictional contacts combining complementarity relations and an arc-length method Koo, JS; Kwak, Byung Man, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, v.39, no.7, pp.1161 - 1180, 1996-04 |
| POSTBUCKLING ANALYSIS OF NONFRICTIONAL CONTACT PROBLEMS USING LINEAR COMPLEMENTARITY FORMULATION KOO, JS; Kwak, Byung Man, COMPUTERS STRUCTURES, v.57, no.5, pp.783 - 794, 1995-12 |
| Process design of high-strength bolt of fully pearlitic high-carbon steel Lee, Hyun-Chul; Jin, Young-Gwan; Lee, You-Hwan; Son, Il-Heon; Lee, Duk-Lak; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.210, no.14, pp.1870 - 1875, 2010-11 |
| Process optimization of a non-circular drawing sequence based on multi-surrogate assisted meta-heuristic algorithms Pholdee, Nantiwat; Baek, Hyun Moo; Bureerat, Sujin; Im, Yong-Taek, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.29, no.8, pp.3427 - 3436, 2015-08 |
| Processing map approach for surface defect prediction in the hot bar rolling Kim, HY; Kwon, HC; Lee, HW; Im, Yong-Taek; Byon, SM; Park, HD, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.205, no.1-3, pp.70 - 80, 2008-08 |
| Reversible self-bending soft hydrogel microstructures with mechanically optimized designs Kim, Jongmin; Kim, Cheolgyu; Song, YoungShin; Jeong, Seong-Geun; Kim, Taek-Soo; Lee, Chang-Soo, CHEMICAL ENGINEERING JOURNAL, v.321, pp.384 - 393, 2017-08 |
| RIGID-PLASTIC FINITE-ELEMENT ANALYSIS OF SHEET-METAL FORMING PROCESSES USING A SELECTIVE-MEMBRANE SHELL FORMULATION SONG, IS; SHIM, HB; Yang, Dong-Yol, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.47, no.3-4, pp.323 - 344, 1995-01 |
| RIGID-PLASTIC FINITE-ELEMENT ANALYSIS OF SHEET-METAL FORMING PROCESSES USING CONTINUOUS CONTACT TREATMENT AND MEMBRANE ELEMENTS INCORPORATING BENDING EFFECTS YOO, DJ; SONG, IS; Yang, Dong-Yol; LEE, JH, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.36, no.6, pp.513 - 546, 1994-06 |
| Seriate microfluidic droplet coalescence under optical forces in a channel flow Cho, Hyunjun; Jung, Jin Ho; Sung, Hyung Jin, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, v.56, pp.324 - 334, 2015-12 |
| Shear Stress Hardening Curves of AISI 4130 Steel at Ultra-high Strain Rates with Taylor Impact Tests Lee, Sungbo; Huh, Hoon, INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, v.149, 2021-03 |
| Sheet metal forming analysis of planar anisotropic materials with a proper numerical scheme for the blank holding force Choi, Tae Hoon; Lee, Choong Ho; Huh, Hoon, METALS AND MATERIALS-KOREA, v.4, no.3, pp.408 - 419, 1998 |
| Simulation of earing behaviors in bake hardening steel exhibiting a strong off-gamma-fiber component Kim, Eun-Young; Choi, Shi-Hoon; Shin, Eun-Joo; Yoon, JeongWhan, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, v.49, no.25, pp.3573 - 3581, 2012-12 |
| Simulation of flow-flexible body interactions with large?deformation Uddin, Emad; Sung, Hyung Jin, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, v.70, no.9, pp.1089 - 1102, 2012-11 |
| Size-dependent constitutive model for shape memory alloys based on couple stress elastoplasticity Choi, Jae-Hoon; Zaki, Wael; Sim, Gi-Dong, APPLIED MATHEMATICAL MODELLING, v.118, pp.641 - 664, 2023-06 |
| Steady state finite element simulation of bar rolling processes based on rigid-viscoplastic approach Kim, SY; Lee, HW; Min, JH; Im, Yong-Taek, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, v.63, no.11, pp.1583 - 1603, 2005-07 |
| Stochastic assessment considering process variation for impact of welding shrinkage on cost of ship production Heo, Hee Young; Chung, Hyun, INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, v.52, no.20, pp.6076 - 6091, 2014 |
| Strain-rate potential based elastic/plastic anisotropic model for metals displaying tension-compression asymmetry Yoon, Jong-Hun; Cazacu, Oana; Yoon, Jeong Whan, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, v.200, no.23-24, pp.1993 - 2004, 2011 |
| Structure-dependent mechanical behavior of copper thin films Lee, Yong Seok; Ha, Sangyul; Park, Jin-Hyoung; Lee, Soon-Bok, MATERIALS CHARACTERIZATION, v.128, pp.68 - 74, 2017-06 |
| Super-resolving material microstructure image via deep learning for microstructure characterization and mechanical behavior analysis Jung, Jaimyun; Na, Juwon; Park, Hyung Keun; Park, Jeong Min; Kim, Gyuwon; Lee, Seungchul; Kim, Hyoung Seop, NPJ COMPUTATIONAL MATERIALS, v.7, no.1, 2021-06 |
| Synthetic capsule breakup in simple shear flow Joung, Seyoung; Song, Minho; Kim, Daegyoum, PHYSICS OF FLUIDS, v.32, no.11, 2020-11 |
| Tensile Properties of Sheet Metals at Intermediate Strain Rates with Pre-Strain Kim, Seok Bong; Huh, Hoon, STEEL RESEARCH INTERNATIONAL, v.86, no.11, pp.1298 - 1311, 2015-11 |
| The effect of a non-circular drawing sequence on delamination characteristics of pearlitic steel wire Baek, Hyun Moo; Hwang, Sun Kwang; Joo, Ho Seon; Im, Yong-Taek; Son, Il-Heon; Bae, Chul Min, MATERIALS & DESIGN, v.62, pp.137 - 148, 2014-10 |
| The effect of a non-circular drawing sequence on spheroidization of medium carbon steel wires Joo, Ho Seon; Hwang, Sun Kwang; Baek, Hyun Moo; Im, Yong-Taek; Son, Il-Heon; Bae, Chul Min, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.216, pp.348 - 356, 2015-02 |
| The effect of the misfit dislocation on the in-plane shear response of the ferrite/cementite interface Kim, Jaemin; Ghaffarian, Hadi; Ryu, Seunghwa; Kang, Keonwook, COMPUTATIONAL MATERIALS SCIENCE, v.173, 2020-02 |
| The effect of the multi-pass non-circular drawing sequence on mechanical properties and microstructure evolution of low-carbon steel Lee, Jung Wan; Baek, Hyun Moo; Hwang, Sun Kwang; Son, Il-Heon; Bae, Chul Min; Im, Yong-Taek, MATERIALS & DESIGN, v.55, pp.898 - 904, 2014-03 |
| Thermal characteristics of tubular single lap adhesive joints under axial loads Kim, JK; Lee, Dai Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.15, no.12, pp.1511 - 1528, 2001 |
| Three-dimensional crystal plasticity finite element analysis of microstructure and texture evolution during channel die compression of IF steel Kim, Dong-Kyu; Kim, Jaemin; Park, Wonwoong; Lee, Ho Won; Im, Yong-Taek; Lee, Yong-Shin, COMPUTATIONAL MATERIALS SCIENCE, v.100, pp.52 - 60, 2015-04 |
| Three-dimensional finite element analysis of non-isothermal shape rolling Kim, SY; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.127, no.1, pp.57 - 63, 2002-09 |
| Tungsten alloy impact fracture for frangible armor piercing Noh, Donghwan; Fazily, Piemaan; Yu, Kwanghyun; Lee, Sungbo; Ko, Dong Kyun; Sung, Min Je; Huh, Hoon; et al, INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, v.180, 2023-10 |
| Two-way shape memory effect induced by repetitive compressive loading cycles Kim, Hyun-Chul; Yoo, Young-Ik; Lee, Jungju, SMART MATERIALS & STRUCTURES, v.18, no.9, 2009-09 |
| Warpage Analysis of Electroplated Cu Films on Fiber-Reinforced Polymer Packaging Substrates Kim, Cheolgyu; Lee, Tae-Ik; Kim, Min Sung; Kim, Taek-Soo, POLYMERS, v.7, no.6, pp.985 - 1004, 2015-06 |
| Warpage Behavior and Life Prediction of a Chip-on-Flex Package Under a Thermal Cycling Condition Jang, Jae-Won; Suk, Kyoung-Lim; Park, Jin-Hyoung; Paik, Kyung-Wook; Lee, Soon-Bok, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.4, no.7, pp.1144 - 1151, 2014-07 |
| Yield and strain rate potentials for aluminum alloy sheet forming design Chung, Kwansoo; Barlat, Frédéric; Yoon, Jeong Whan; Richmond, Owen; Brem, John C; Lege, Daniel J, METALS AND MATERIALS INTERNATIONAL, v.4, no.4, pp.931 - 938, 1998 |
Discover
Open Access
Date issued
- 4,057 2020 - 2024
- 12,348 2010 - 2019
- 10,785 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989